Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg
Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: die -Punching dimensions: 15 x 25 mm square -Dimensions: 115/115/H115 mm -Weight: 3.4 kg
Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 50 mm -Dimensions: 200/120/H80 mm -Weight: 5.6 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg
bench vice, metalworker & vice, parallel vice -Jaw width: 135 mm -Wingspan: 215 mm -Number: 3x vices available -Price: per piece -Dimensions: 440/200/H490 mm -Weight: 26 kg
Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: slot 10 x 26 mm -Punching dimensions: see photo with dimensions -Hole: Ø 40 mm -Dimensions: 400/90/H205mm -Weight: 7.5kg
Hand lever shears, long-blade sheet metal and round steel shears -Peddinghau:s 4R/7, long-blade sheet metal and round steel shears -Particularly stable scissor body made of: tempered steel -Lever arm with: safety spring -Infinitely adjustable: hold-down device -Steel sheet up to: 7 mm -Round steel up to: 20 mm -Square: 18 mm -Cutting length up to: 170 mm -Performance rating for: Material with a strength of 450 N/mm² -Dimensions: 770/650/H2250 mm -Weight: 91 kg
Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: Long hole type S27-40 -Hole: Ø 40 mm -Dimensions: 300/150/H250 mm -Weight: 12.4 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Type: 4412151063 -1x dimensions: 220/206/H30 mm -1x dimensions: 215/205/H30 mm -Weight: 16 kg
Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, lever shears, sheet metal and round steel shears -Steel sheet: up to 7 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -Lift-down device: -Overall dimensions: 480/210/H1360 mm -Transport dimensions: 1070/210/H470 mm -Weight: 41 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg
机械打孔机，冲压力为1000千牛。 可按要求安装最大90毫米冲头的刀具夹持。邮票和模 种类繁多，邮票和模具也包含在配送范围内
剪切力60吨 冲击力40吨 型钢剪刀 L型和T型铁杆，90° 100 x 10 mm 在45° 65 x 8 mm 缺口装置 带有正方形缺口，适用于最大10毫米的金属板 平钢剪，适用于380 x 8毫米的平钢剪 或150 x 14毫米 重量：约1.5吨 尺寸：约1.7 x 1.05 x 1.98米 配件 - 电接触止挡 3000 毫米 - 锚点表 - 可调节固定装置 - 工具包 安全支票有效期至2026年2
报价25437 技术数据： - 压力容量：500千牛 - 行程无限调节 10 - 32 毫米 - 冲程：22 - 27 1/分钟 - 投影面积510毫米 - 安装高度：350毫米 - 驱动 400 V / 4 千瓦 - 孔洞，例如钢材最大27毫米，14毫米 - 配备特殊冲孔鞍座，例如钢制最大可达39毫米，9.5毫 - 例如钢材中最大90毫米，4毫米 - 空间需求约 宽700 x 高 1700 x 深1200毫米 - 重量约 1150公斤 - 与：- 水博士。低压谷物定位仪 - 用于分段钢冲孔的长冲孔夹 - 带钳子供料控制的滚筒输送机 PEHU 101 - 滚筒输送机 6000毫米 - 脚踏开关 - 紧急停止按
最大冲孔能力：800 kN 最大剪切能力： 1100 kN 在 20 mm 钢上冲 27 mm 孔 扁钢剪切至 500 毫米，材料厚度可达 18 毫米钢 可根据要求提供更多技术数据 根据需要提供各种冲压和模
punching pressure: 28.0 t punching cross-cut in cmm: 31 in 7.0 mm ST throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32.0 ltr. work height max.: 1033 mm total power requirement: 3.0 kW weight of the machine ca.: 553 kg dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amp ...
pressure: 100 t punching cross-cut in cmm: Ø 31 in 25 mm stroke: 10 - 50 mm column arm: 510 mm work height max.: 1100 mm no. of strokes: 14 - 45 Hub/min punch diameter: max. Ø 90.0 mm oil volume: 103 l total power requirement: 7.5 kW weight of the machine ca.: 2400 kg. range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual The data for this ad was created with ModulMWS ...
pressure: 80,0 t punching cross-cut in cmm: 31,0 in 25 mm shear: flat material: 500x18 / 300x22 mm L-beam: 150 x 12 mm round bar steel: 50 + 25 mm square edge steel: 50 + 30 mm throat: 510 mm blade length: 500 mm work height max.: ca. 1.100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
二手、技术检修的钢筋折弯机。 PCN 控制单元 折弯盘的旋转速度为 8/16 rpm。 连接 16 A 单弯最多 1 块 28 毫米深的钢筋。 标准折弯工具 2 个带急停功能的脚踏开关。
最大冲剪能力：800 kN 例如，在 20 毫米钢上打 25 毫米的孔 350 mm 至 15 mm 钢上的扁钢剪板剪 可根据要求提供更多技术数据 根据需要提供各种冲压和模
液压： ja ： 100 t 机器重量 ca.： 2,9 t该广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
圆钢：42 毫米 方边钢：38 毫米 L 型钢：110 x 10 毫米 切割能力：150 x 16 毫米 压力：60 孔 冲孔机：喉部：370 毫米 孔冲床：容量（直径 x 厚）：25 x 16 / 20 x 19 毫米：720 x 420 毫米 总功率要求：千瓦 机器重量约：2,1 吨机器尺寸：1,8 x 1,6 x 1,85 米Profilstahlschere- inkl.Fußschalter此广告的数据是使用 LogoTech oHG 的软件解决方案 ModulMWS 创建的
圆棒钢： - 毫米方边钢： - 毫米L型梁： - 毫米总功率要求： 7.5 kW机器重量 CA.： 4.5 t机器尺寸 CA.： 2,212,35 mdiv.冲头和模具脚踏开关 备用刀片该广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
圆钢：28 毫米 方边钢：25 毫米 L 型钢：80 x 8 毫米缺口帽。低碳钢 最大功率： 7 毫米 垂直剪切机的切割能力： 350 kN输出功率： 190 kNs剪切力： 平面材料： 100 x 11 毫米 剪切力： 刀的长度： 约 175 毫米总功率要求： 1.5 kW 机器重量约： 0.5 t机器尺寸 长 x 宽 x 高： 1.0 x 0.5 x 1.5 米此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 50 mm square edge steel: 45 mm L-beam: 150 x 14 mm total power requirement: 4 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,3 x 1 x 2,1 m No. 3418 5-fold combined profile steel shears with flat steel shears PEDDINGHAUS 210 Super 16 pressure capacity 80 to Round steel 50 mm Square steel 45 mm angle steel 150 x 14 mm Punching up to 90 mm diameter 5.5 HP Space requirement 2.30 x 1.0 x 2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 63 mm square edge steel: 55 mm flat steel: 100 x 25 mm : engine: 380 V, 6,3 kW weight: ca. 2.450 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
