边缘磨床 法布尔。勒威尔 型号：KS225 旋转研磨单元 研磨面：150 x 800 毫米 砂纸带长度：2250毫米 总重量：77公斤 吸油喷嘴：2 x 100 mm 电机：1.1千
Löwer型HBS 400磨床 技术数据： - 最大研磨宽度（毫米）：390 - 最大研磨高度（毫米）：390 - 从上方看砂纸鞋：1 - 研磨电机（千瓦）：7.5 - 砂磨带尺寸（毫米）：300 x 1800 - 运输地毯：用于物料饲料 - 进给速度（m/min.）：6/11/2016 - 吸力连接口径（毫米）：150 - 固定桌面高度 - 气动砂带振荡 - 气动磨料带夹紧 - 专用HBS砂纸鞋：用于厚度差达4毫米或斜面工件的贴合 性磨削 - 选择开关自适应研磨/校准 - 电动工件厚度调节，带快速横转 - 自动工件厚度扫描 - 机器长度（毫米）：1150 - 机宽（毫米）：1020 - 机重（公斤）：950 - 符合CE标
工作台尺寸 X/Y/Z：约1400mm/800mm，砂轮直径：150mm，主轴转速：2000 /分钟，旋转范围：180，机器尺寸X/Y/Z：约1600mm/1300mm/1 750mm，重量约400kg。现场检查是可能的
市面上有两台相同的单木带砂磨机Löwer。砂纸带长度 1600毫米，砂带宽度：160毫米，工作宽度：150毫米， 给速率：16米/分钟，拔出连接：100毫米。机器尺寸X/ Y/Z：约1400毫米/1000毫米/1600毫米，重量约650公斤。现 检查是可能的
磨床 Löwer double sided 类型： DSM 2000 制造年份：公元 1996 年 研磨宽度 190 mm 研磨厚度 – 材料厚度 2 – 180 毫米 砂带尺寸 200 x 1800 毫米 无磨损陶瓷砂鞋（无需石墨涂层） 电动高度调节 0.37 kW 工件长度最小 300 mm 进料速度 6/11/16 m/min。 砂带驱动 2 x 5.5 kW / 400 V 砂带速度 22 米/秒。 1 个砂鞋和上方清洁刷 1 个砂靴和从下方清洁刷 出口前的吹气装置 吸嘴直径 2 x 150 mm 和 2 x 120 mm 入口高度 850 mm 总连接功率约 14 kW 包括由倾斜溜槽和返回辊道组成的工件返回 良好的即用型状态 机器尺寸：长 2070 毫米 x 宽 920 毫米 x 高 1890 毫米 重量约 1500 kg
Number of sanding units: 1 st. sanding width: 150 mm Sanding height max.: 150 mm Loewer edge finishing machine MiniSpin N ------------------------- Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush
Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm LÖWER CrossMaster DBx2-200 -------------------------------- for the finish sanding and intermediate sanding of all strips Type with simultaneous processing from above and below - 1 disc sanding flap unit each from above and bottom, D= 200mm, 0.75 kW, - Continuous speed control of the disc units 200-600 rpm via frequency converter - 1 grinding flap roller each from above and below, D = 270mm, B=150mm, counter rotation, 0.75kW each, - Continuous speed control of the grinding spindles 200-1000 rpm, via frequency converter - Staggered arrangement of the sanding units, each at the top and bottom Below, grinding flap disc with subsequent grinding flap roller - Working width max. 200mm - Safe conveyor belt feed (top and bottom). spring-loaded pressure rollers, transport belt width 200mm - continuous feed 4-20m/min ...
Number of sanding units: 2 St. sanding width: 190 mm Sanding height max.: 2-180 mm LÖWER double-sided grinding machine DSM 2000 --------------------------------- Double-sided single wood sander for sanding Solid wood such as window wood etc. Stable top quality Guide with long casting tables, brushing and finishing equipment and conveyor belt feed. Suitable for high continuous loads even with higher chip removals. - Staggered sanding and finishing units at the top and bottom - Directly driven rubberized grinding rollers for slip-free power transmission - Combined grinding via roller and shoe for high chip removal at the same time flat intervention zone - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and higher grinding Grinding belt service life - Fo ...
Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm LÖWER-DoubleSander Solid DSM 3000 ---------------------------------- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumat ...
Number of sanding units: 2 st. sanding width: 390 mm Sanding height max.: 390 mm LÖWER BeamSander HBS 402 -------------------------------- Single-sided belt sander for sanding beams, Glued beams and other bar-shaped workpieces Wood with two sanding units from above. - constant working height enables the use of Roller conveyors in front of and behind the machine - heavy version with cast table - Conveyor belt feed with heavy pressure rollers - Calibration unit with steel roller - Fine grinding unit with fixed calibration sanding shoe - Working width 390mm - Workpiece thickness 4mm - 390mm 1. Grinding unit (calibration) - heavy steel roller with 200mm diameter - stable roller bearing - pneumatically controlled sanding belt oscillation - Sanding belt dimensions 400x1800mm - Drive motor 7.5 kW - Chip removal depending on the belt grain size up to 2mm 2. Grinding unit (fine grinding) - Calib ...
Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ------------------------------------------------- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat interve ...
Number of sanding units: 8 st. sanding width: 180 (260) mm Sanding height max.: 160 mm Dimensions (L/W/H): 3065x1600x1900 mm weight of the machine ca.: 1500 kg LÖWER Leistomat SD --------------------------------- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units ...
工作台尺寸：1000，400毫米 气动张力：2个。 移动式：用于快速压制迷你锌或钢丝连接 件的选件 - 与角度无关 - 特别适用于窗口结构 中的圆板生产 - 工作台尺寸 1000 x 400 mm - 气动连接 10 bar - 空气消耗：0.5 cdm/工作行程 - 2 个用于工件夹紧 的夹紧缸 - 工作台的右半部分通过球形直线轴承 安装在硬化轴上- 1 个用于线性工作台位移 的压力缸 - CE - 版本 （技术数据根据制造商 - 无保证！ 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm LÖWER-DoubleSander Solid DSM 2004 ---------------------------------- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding ...
Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine --------------------------------------------- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturers Description: --------------------------------------------- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-dri ...
Table dimensions: 1000,400 mm pneumatic clamping: 4 St. moveable: ja Löwer MZP 2 Mini Tine Press --------------------------- For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
