생산자:
(범주: 101-79)
10 € 감시 목록에 추가
This column drill from HBM is ideally suited for professional use. It has a tilting work table and a keyless drill chuck (1 to 13 millimeters). A pillar drill like this is intended for professional drilling work in steel. The motor power of 375 watts ensures that it can get quite deep into the material to be drilled. The tilting work table and the high-quality keyless drill chuck ensure a pleasant working experience. Auction-ID: A1-40897-27
100 € 감시 목록에 추가
Equipped with: 400 V / 3-phase, continuous input power 4.1 kW and output power 3.0 kW, momentary (S3-60%) 4.6/3.5 kW, 3 gears with 160 / 340 / 510 rpm, 50 Hz, 7.5 A and protection class IP55, mounted on Hilti DD-CA-M drill stand. Water connection. incl 1 drill of 22cm diameter and 400mm high, Auction-ID: A1-47388-320
1.250 € 감시 목록에 추가
Radial drilling machine - Clamping cube 750 x 500 x 500mm - Digital display for boom travel - Coolant system - Good condition Drilling capacity in steel 40 mm Projection 1600 mm Drilling capacity in cast iron 60 mm Spindle diameter 85 mm Quill stroke 350 mm Tool holder MK 5 Speeds 24 - 1050 rpm Feeds 0.06 - 1.0 mm/rev Column diameter 345 mm Threading device yes Drilling motor 5.5 kw Total power requirement 7.5 kW Machine weight approx. 4000 kg Dimensions approx. 2.5 x 1.0 x 2.99 m Auction-ID: A7-49782-599
950 € 감시 목록에 추가
Column drill with: - Feed via handwheel - Spindle speeds via belt drive Drilling capacity in steel 32 mm Projection 300 mm Drilling stroke 140 mm Recording MK 3 Table size 380 x 360 mm Feeds via handwheel Speed 85 - 1100 rpm Total power requirement 1.3 KW Machine weight approx. 0.27 t Dimensions L x W x H 0.95 x 0.6 x 1.92 m Auction-ID: A7-49782-590
1.190 € 감시 목록에 추가
Radial drilling machine - Clamping cube 750 x 750 x 500mm - Coolant system - Emergency stop facility Drilling capacity in steel 50 mm Projection 1100 mm Quill stroke 300 mm Tool holder MK 5 Speeds: 22 - 1000 rpm Feeds yes Drilling motor 4.5 kw Total power requirement 7.0 kW Machine weight approx. 3200 kg Dimensions approx. 2.1 x 0.9 x 2.85 m Auction-ID: A7-49782-656
1.290 € 감시 목록에 추가
Drilling and milling machine - Digital display - Left/right rotation - 2 electr. Speed levels - Drilling spindle with autom. Feed and manual feed - With machine base Drilling capacity in steel 40 mm Projection 250 mm Drilling stroke 125 mm Spindle Holder MK 4 Spindle speeds: 50 - 2500 rpm Table adjustment transverse 550 mm Table adjustment longitudinal 230 mm Table clamping area 820 x 240 mm Connection voltage 400 V Total power requirement 0.8 kW Machine weight approx. 0.7 t Space requirement approx. 1.2 x 1.0 x 1.85 m Auction-ID: A7-49782-657
1.690 € 감시 목록에 추가
Column drill with: - Feed - Variable spindle speed - Coolant pump - Machine light Drilling capacity in steel 32 mm Projection 325 mm Drilling stroke 170 mm Mounting MK 4 MK Table size 570 x 480 mm Feeds 0.1 - 0.16 - 0.25 mm/rev Speed 60 - 1600 rpm Total power requirement 2.9 KW Machine weight approx. 0.65 t Dimensions L x W x H 1.2 x 0.8 x 2.15 m Auction-ID: A7-49782-622
490 € 감시 목록에 추가
Quantities: 10× FINE PC Screwdriver 7× FINE 18V batteries Technical data Manufacturer: FEIN Model: AccuTec ASM PC Device type: Cordless torque wrench Voltage: 18V DC Mount: 1/4\" hexagon socket quick-change mount Direction of rotation: clockwise/counterclockwise rotation Electronic torque cut-off Brushless motor Usage: Industrial series assembly Made in Germany Auction-ID: A1-49884-92
890 € 감시 목록에 추가
Electric tapping machines for M3 - M16 threads. Incl. connection for cutting oil supply Angle adjustable. Quick-change chuck with slipper clutch. Adjustable via display: variable speed, Adjustable depth, Material selection, Election of the main direction of rotation, Thread selection. Documentation in English! Optional: Clamping table with grooves Type: FL-WB Thread diameter M3 - M16 metric Speed infinitely variable 300 rpm. Working range max. 1100 mm Motor power 0.6 kW Weight 30 kg Dimensions L x W x H 700 x 600 x 200 mm Condition: never used / new (5) Auction-ID: A7-49782-595
1.890 € 감시 목록에 추가
Column drill with: - Variable spindle speed - Digital display for speed - Digital display for drilling depth - Left/right rotation - Incl. vice Drilling capacity in steel 30 mm Projection 275 mm Drilling stroke 100 mm Mounting MK 4 MK Table size 420 x 340 mm Speed 80 - 2000 rpm Total power requirement 0.9 / 1.45 KW Machine weight approx. 0.22 t Dimensions L x W x H 0.85 x 0.6 x 1.9 m Auction-ID: A7-49782-593
120 € 감시 목록에 추가
Professionele BGU (Bohrgeräte Union) SB 510 SHRV kolomboormachine, uitgevoerd als zware industriële staande boormachine met verstelbare werktafel. Geschikt voor professioneel boorwerk in metaal en voorzien van een robuuste kolomconstructie, meertraps aandrijving en bedieningspaneel aan de voorzijde - de kolomboormachine is werkend - opmerking: de pinole komt na het naar beneden bewegen niet automatisch terug omhoog. Handmatig terugbrengen is mogelijk. Nazicht en/of herstelling van het terugtrekmechanisme wordt aanbevolen - Een heftruck is op locatie beschikbaar om de machine op pallet op de vrachtwagen te laden. Auction-ID: A3-46152-10508
4.700 € 감시 목록에 추가
Machine number: 6233-5Speed: up to 2800 rpmDrilling diameter: up to 40 mmProjection: approx. 907 mmwith two tablesTable dimensions: 780 x 600 mm - with four grooves, as well as a three-jaw chuck, diameter: 400 mmTable 2: 1000 x 540 mm, with four grooves and two vices, one jaw width: 125 mm and 100 mma four-jaw chuck, manufacturer RÖHm, diameter: 200 mm as well as a four-jaw chuck, diameter: 150 mmand a dividing head from the manufacturer HOFMANN, type: VTS 160 with a three-jaw chuck, diameter: 200 mmalso various clamping systems, including KOHN clamping system, jaw width: 120 mm Auction-ID: A7-49089-208
2.500 € 감시 목록에 추가
Technical details Manufacturer: Csepel Type: Radial drilling machine Configuration: - Heavy-duty radial arm - Rotating column - Vertically adjustable drilling head - Geared spindle drive - Manual and power spindle feed - Drill chuck installed - Large T-slotted box table - T-slotted base plate - Speed and feed selector gearbox - Mechanical control system Application: - Drilling - Boring - Tapping - Reaming - Machining of large steel workpieces Construction: - Heavy-duty cast-iron frame - Conventional mechanical operation Estimated drilling capacity: Approx. 75 mm in steel Estimated arm reach: Approx. 1750–2000 mm Dimensions: - Length: Approx. 2500 mm - Width: Approx. 1200 mm - Height: Approx. 2900 mm Weight: Approx. 4500 kg Condition: Used Observed condition: - Machine appears substantially complete - Original gearbox and controls installed - Drill chuck fitted - Large cast T-slotted ta ...
2.300 € 감시 목록에 추가
Column drill with: automatic feed Tapping function. Digital depth display 2 Stage Motor Spindle protection Swivel table LED lighting Coolant system Drilling capacity in steel 40 mm Projection 350 mm Drilling stroke 180 mm Spindle mount MK 4 MK Table: 560 x 560 mm Column diameter 140 mm Speed 50 - 1450 rpm Feeds 0.1 - 0.2 mm/rev Total power requirement 1.5 kW Machine weight approx. 580 kg Condition: never used / new (5) Auction-ID: A7-49782-487
1.190 € 감시 목록에 추가
Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5) Auction-ID: A7-49782-404
590 € 감시 목록에 추가
Pneumatic Tapping Machine version with an adjustable angle, Horizontal tapping possible Tapping machine for M3 - M16 threads, Angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M16 Speed infinitely variable 250 rpm. Working pressure 6 - 8 bar Working range max. 1200 mm Weight 22 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5) Auction-ID: A7-49782-520
1.200 € 감시 목록에 추가
Gear Drilling Machine Tapping device Left / Right Run Tilt work table. Lighting. 2 electr. Speed levels. Depth stop . Gears run in oil. Packaging Dimensions: 2100 x 400 x 710mm Weight 260Kg Drilling capacity in steel 30 mm Projection 250 mm Drilling stroke 130 mm Spindle mount MK 3 MK Table: 380 x 380 mm Column diameter 98 mm Speed 75 - 3200 rpm Feeds mm/U Total power requirement 1.1 kW Machine weight approx. 220 kg. Dimensions L-W-H 0.5 x 0.6 x 2.05 mm Condition: never used / new (5) Auction-ID: A7-49782-425
1.050 € 감시 목록에 추가
RADIAL DRILL SASS mod. TRL 1600 Max. working diameter 90/110 mm Max. spindle/column centre distance 3,020 mm Min. drilling radius 695 mm Max. drilling radius 3.345 mm Min. spindle nose-to-base distance 540 mm Max. distance between spindle nose and base 2.250 mm Spindle - CM 6 110 mm Spindle stroke 550 mm Spindle speed - 24 from 19 to 1.540 RPM Spindle motor power 20 HP Column diameter 650 mm Total weight 15.700 kg Complete with: - Worktop (cube) Auction-ID: A1-48745-25
800 € 감시 목록에 추가
Drilling and milling machines: digital depth and speed display, 2 gear stages with fine adjustment and variable speed, Includes left-right switch Left and right swivel head Comes with associated tools Drilling capacity in steel 25 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 280 mm Table adjustment longitudinal 155 mm Table clamping area 500 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.8 kW Machine weight approx. 150 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5) Auction-ID: A7-49782-414
2.750 € 감시 목록에 추가
Quick radials with: - Feed - Tapping device Drilling capacity in steel 32 mm Projection 1230 mm Table surface 1200 x 500 mm Drilling stroke 180 mm Feed - automatic 0.10 - 0.15 - 0.20 mm Speed 45 - 1370 rpm Recording MK 4 Total power requirement 2.7 kW Machine weight approx. 1.8 t Dimensions approx. 2.2 x 1.8 x 2.3 m Auction-ID: A7-49782-405
1.100 € 감시 목록에 추가
Drilling and milling machine with Powerful 2-speed engine. Recording MC 3 - B16. Drill chuck 3 - 16 mm. Left/right switch. Spindle protection. Fine tuning. Ejection wedge. Clamping threaded rod for tool Related tools. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 425 mm Table clamping area 700 x 210 mm Connection voltage Vmax. Distance between work table and spindle nose 470 mm Total power requirement 1.5 kW Machine weight approx. 230 kg Dimensions approx. 0.75 x 1.05 x 1.2 m Condition: never used / new (5) Auction-ID: A7-49782-501
490 € 감시 목록에 추가
Pneumatic Tapping Machine version with an adjustable angle, Horizontal tapping possible Tapping machines for M3 - M12 threads, Angle adjustable. 6 quick-change chuck with slipper clutch. Thread diameter M3 - M12 metric Speed infinitely variable 400 rpm. Working pressure 6 - 8 bar Working range max. 1100 mm Weight 20 kg suitable clamping table Lot 224, 254 or 265. Condition: never used / new (5) Auction-ID: A7-49782-435
2.900 € 감시 목록에 추가
Fast radials with - Tapping device - Table vertical 750 x 620mm - Horizontal table 1200 x 510mm - Emergency stop facility - Documentation Machine No. 445 Drilling capacity in steel 32 mm Projection 950 mm Speed range 51 - 1000 rpm Speed levels 12 Drill spindle Morse taper MK 4 Quill stroke 160 mm Feed range 0.075 x 0.3 mm/min Table surface 1200 x 510 mm Total power requirement 2 kW Machine weight approx. 1.9 t Space requirement approx. 1.8 x 1.2 x 2.25 m Auction-ID: A7-49782-423
3.400 € 감시 목록에 추가
Quick radials with: - Feed - Tapping device Drilling capacity in steel 32 mm Projection 1230 mm Table surface 1200 x 500 mm Drilling stroke 180 mm Feed - automatic 0.10 - 0.15 - 0.20 mm Speed 60 - 1800 rpm Recording MK 4 Total power requirement 2.7 kW Machine weight approx. 1.8 t Dimensions approx. 2.2 x 1.8 x 2.3 m Auction-ID: A7-49782-455
1.200 € 감시 목록에 추가
Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right Switch Head swivel left/right 90° Spindle protection. incl. toolbox with various tools Drilling capacity in steel25 mm Projection 175 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle holder ISO 30 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 380 mm Table adjustment longitudinal 175 mm Table clamping area 700 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5) Auction-ID: A7-49782-458
3.100 € 감시 목록에 추가
Equipment: 3-axis digital display Digital depth display Motorized feed for X and Y Left/Right Run Emergency stop Swivelling drill head Spindle protection. Machine Light Tool case with contents Drilling capacity in steel 35 mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 40 Spindle speeds 115 - 1750 rpm Table adjustment transverse 375 mm Table adjustment longitudinal 175 mm Table clamping area 1000 x 240 mm Max. distance between work table and spindle nose 120 - 375 mm Connection voltage 400 V Total power requirement 0.85 / 1.5 kW Machine weight approx. 0.95 t Space requirement approx. 1.3 x 1.2 x 2.1 m Condition: never used / new (5) Auction-ID: A7-49782-525
1.950 € 감시 목록에 추가
Drilling machine with: Feed 2 gears Left/right rotation Footswitch Coolant Pump Machine Light Drilling capacity in steel 40 mm Projection 345 mm Drilling stroke 200 mm Table clamping area 720 x 560 mm Speed 60 - 765 rpm Feed rate 0.15 - 0.2 - 0.3 - mm/rev Tool holder MK 4 Total power requirement 3.0 kW Machine weight approx. 0.4 t Condition: unchecked (6) Auction-ID: A7-49782-507
