톱 사용 판매를 위해 (1,245)

Auction-ID: A1-40976-14

Auction-ID: A1-40976-36

Saw blade Ø 300 mm; overall size 130x120x170 cm; working height 90 cm; table size 106x91 cm; equipped with Maggi Steff 2034 power supply Auction-ID: A1-44305-33

cutting diameter: 300 mmsaw band length: 3660 x 27 x 0.9 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: round: 290 mmcapacity 45 degrees: flat: 260 x 280 mmcapacity 60 degrees: round: 200 mmcapacity 60 degrees: flat: 180 x 170 mmcoolant capacity: ca. 100 lControl: SPS total power requirement: 2.4 kW ACweight: 904 kgrange L-W-H: 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on requestFeatures:- Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) Fully automatic with automatic material feed Material feed unit with recirculating ball screws- Includes PLC MITSUBISHI control unit 20 programs, each with 15 cutting lengths + number of pieces programmable- For angles from 0° to 60°, with ball-bearing rotary table Mitre cuts up to 45° possible in automatic mode Mitre cuts up to 60° possible in semi-automatic mode Ma ...

cutting diameter: 335 mmcapacity 90 degrees: flat: 500 x 335 mmcapacity 45 degrees: round: 330 / 305 mmcapacity 45 degrees: flat: 320 x 335 / 305 x 335 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 335 mmsaw band length: 4400 x 34 x 1,1 mmControl: SIEMENS speed: 15 - 150 m/minwork height max.: 750 mmmaterial layer: max. 250 kg/mcoolant tank capacity: 80.0 ltr.oil volume: 30.0 ltr.power capacity: 5.5 kWweight of the machine ca.: 1980 kgrange L-W-H: 2900 x 2350 x 1900 mm current new price approx. 80.000 euros special price on requestEquipment:- MEBA double mitre bandsaw - fully automatic- with electric miter adjustment via servo motor Adjustment right up to 60° / left up to 45°- Material feed 0 - 600 mm // with multiple feed 0 - 9999 mm- Infinitely variable lowering speed 0-300 mm/min- Saw blade speed via frequency-controlled AC drive (15-150 m/min)- Automatic cutt ...

Auction-ID: A1-47154-461

Auction-ID: A1-44305-36

: neu : ca. 4 Monate ab Auftragse : Türkei : 50900 €: 962.01 €: Doppelsäulenführung : 5750 x 41 x 1,3 mm: 20 - 120 m/min: 420 mm: 420 mm: 420 x 420 mm: 805 mm: 1.1 kW: 5.5 kW: 1 kW: 0.12 kW: 2860 mm: 1980 mm: 2100 mm: 3700 kgServo feed with 700 mm strokeCutting length up to 9,999 mm (multiple feeds)Omron touchscreen, 50 different cutting lengths and 30 programs can be savedLinear guide41 mm saw bladeControl panelHydraulic viceHydromechanical blade tensionHeavy duty gearboxCoolant deviceSensitive pressureInverter for stepless blade speedChip brushOptical height adjustmentChip conveyorOperating instructions in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 16700 €: 320.64 €: Schwenkrahmen : 4800x34x1,1 mm: 15 - 120 m/min: 360 mm: 360 mm: 510x360 mm: rund 360 mm, quadrat 360 : rund 250 mm, quadrat 220 : rund 280 mm, quadrat 260 : 860 mm: 0.37 kW: 3 kW: 0.12 kW: 2650 mm: 1210 mm: 1870 mm: 1450 kgHydraulic viceInverter for contious variable band speedContinuously adjustable saw arm lowering speedHydromechanical blade tension can be read via pressure gaugeControl panelChip brushCoolant equipmentOperating instructions in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 22700 €: 435.84 €: Doppelsäulenführung : 4800x34x1,1 mm: 20-100 m/min: 380 mm: 380 mm: 430x380 mm: 590 mm: 0.55 kW: 3 kW: 0.12 kW: 2900 mm: 950 mm: 1660 mm: 1342 kgblade brushcontrol panelhydraulic viceoptical adjustment switchhydromechanical blade tensioninvertermechanic top clampingmaterial limit shaftcoolant pumpsaw bladesecurity switchgearboxpressure adjustment1,2 meter roller tableuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 6242 : prompt, Zwischenverkauf v : Italien : 5400 €: 1 : Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 220 mm: 260x140 mm: rund 160 mm, quadrat 155 : rund 95 mm, quadrat 95 mm : 965 mm: 1200 mm: 1100 mm: 1860 mm: 240 kgdemo machine / mint conditionnet price (price for new machine € 6.730,00)manual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentOPTIONS:Roller tables and band saw blades on requestBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-masch ...

Feed table 5800 mm, discharge table 1600 mm. Auction-ID: A1-41998-186

: neu : ca. 10 Wochen ab Auftrags : Italien : 10370 €: 199.1 €: Schwenkrahmen : 3120 mm: 35/70 m/min: 280 mm: 240 mm: 350x140 mm: rund 230 mm, quadrat 200 : rund 150 mm, quadrat 130 : rund 200 mm, quadrat 170 : 830 mm: 1550 mm: 1400 mm: 1750 mm: 420 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentdigital readout for mitre cutsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 12680 €: 243.46 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 350x140 mm: rund 230 mm, quadrat 200 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 830 mm: 1600 mm: 1550 mm: 1750 mm: 460 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 58000 €: 1096.2 €: Schwenkrahmen : 3120 x 27 x 0,9 mm: 15 - 101 m/min: 280 mm: 240 mm: 310 x 240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 5150 mm: 3200 mm: 1950 mm: 5000 x 2200 x 1900 mm: 2150 kgCNC control with 7", touchscreen for the following functions:Feed length, workpiece count, and automatic saw frame rotation for frame adjustmentAutomatic feed 3000 mm / strokeVariable cutting pressureMachine with infinitely variable speedCoolant systemMotorized chip brushChip conveyorAutomatic saw blade breakage monitoringHydraulic vicesRecommended max. diameter of solid material in automatic mode: 150 mmOperating manual in German or EnglishOPTIONS:Hydraulic bundle clamping device, micro-spray device, variable clamping pressure,10", s ...

Equipped with DSG 150 Eco fan, various manuals, roller conveyor H97xW41xL132cm, various machine parts/dies; including flexible hoses up to the ceiling Auction-ID: A1-44305-20

Serial Number: 608003567 Year of Make: 2016 Auction-ID: A1-47154-223

Power: 1300W Auction-ID: A1-47154-166

Auction-ID: A1-41277-39

Auction-ID: A1-41277-38

NO soundproof booth Auction-ID: A7-47148-1

톱날 직경: 400 mm 절단 직경: 130 mm 톱날 회전 속도: 30 / 60 U/최소 용량 90도: 정사각형: 120 mm 총 전력 요구량: 4.8 kW 기계 무게 약 1.8 크기: 1.4 x 1.2 x 2.3 m반자동 냉간 원형톱 - 마이터 절단 - 마이크로 스프레이 윤활 시스템- 안전 장치- 비상 정지 장치 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

Auction-ID: A1-41277-42

Stored in working condition, CNC controlled. Saw blade 400mm. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43538-17037

Auction-ID: A1-41277-252

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 €: 643.67 €: Doppelsäulenführung : 6300 x 41 x 1,3 mm: 15 - 120 m/min: 440 mm: 440 mm: 640 x 440 mm: rund 440 mm, rechteck 400 : rund 250 mm, rechteck 250 : rund 390 mm, rechteck 390 : 860 mm: 1.1 kW: 4 kW: 0.12 kW: 3150 mm: 1850 mm: 2115 mm: 2050 kg3° inclined sawing bandblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverterlinear wayheight adjustmentpressure adjustmentcoolant pumpsaw bladesecurity switchgearboxsyncronized movement of sawing arm/clamping jawhydraulic uplift of sawing frameuser manual in GERMAN or ENGLISHALTERNATIV:Version BMSY 440 CDGH NCwith automatic mitre adjustment by NC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 45210 €: 863.51 €: Schwenkrahmen : 3120x27x0,9 mm: 20-100 m/min: 280 mm: 240 mm: 310x240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 2800 mm: 2000 mm: 1820 mm: 1200 kgCNC control with 7", touchscreen for following functions:feeding length, pieces and rotation of the bow for mitre cuttingautomatic feed 1000 mm / strokevariable cutting pressuremachine with speed variatorcoolante equipmentmotorizes chip brushchip conveyerautomatic saw blade breakage detectionhydraulic clamping vicesRecommended max. diameter of solid material in automatic mode: 150 mmuser manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 4380x34x1,1 mm: 20-100 m/min: 325 mm: 325 mm: 400x325 mm: rund 325 mm, quadrat 325 : rund 300 mm, quadrat 265 : rund 190 mm, quadrat 190 : 655 mm: 1.1 kW: 2.2 kW: 0.12 kW: 2130 mm: 2150 mm: 1650 mm: 1860 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 38.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 €: 213.12 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2.2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with manual adjustable length stop with limit switchblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 9400 €: 181.42 €: Schwenkrahmen : 2730x27x0,9 mm: 35-70 m/min: 230 mm: 230 mm: 240x230 mm: 590 mm: 0.37 kW: 1.3 kW: 0.12 kW: 1700 mm: 800 mm: 1500 mm: 530 kgblade brushcontrol panelheight adjustment switchhydromechanical blade tensioninvertermechanic top clampingmaterial length stopcoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.