생산자:
(범주: 106-448)
프레스 브레이크 벤딩 머신 프레스 브레이크 사용 제조 업체: 멩겔레 유형: C320-4B 건축 년도: 1966 마지막 개정 및 수리: 2000 위치 D-01587 리사 치수: 폭 x 높이: 6,250 x 3,650 mm 가장자리 칼 폭: 6,150 mm 6,000mm 굽힘 길이에서 시트 두께: 약 7.5mm. 이 기계는 매우 깊은 샤프트 가장자리를 위해 설계되었으므로 매우 깊은 뺨 움푹 들어간 부분이 있습니다. 원래 300 t 가압력 - 1989 년 가압력은 350 t로 증가했습니다. 언론은 나이에도 불구하고 매우 좋은 상태에 있습니다. 기계가 분해되어 적재 준비가되었습니다. 사용 가능한 기계에 대한 설명서입니다. 무게: 약 45 t
pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke: 400 mmquantity of oil: 300 lControl: Cybelec Visitouch total power requirement: 15 kWweight of the machine ca.: 10.700 Kgrange L-W-H: 4200x2200x3200 mmEquipment:- Controlled axes: Y1, Y2, X, R, Z1, Z2- SICK” light barrier in front of the machine- Side safety guards- Protective grille behind the machine- foot switch- incl. toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmcolumn arm: 300 mmstroke of ram: 240 mmquantity of oil: 200 lcontrol: CYBELEC Cybtouch 15 range L-W-H: 4500x2200x3000 mmEquipment/accessories:- manual crowning- 3 x manual stop fingers- die displacement- pneum. upper tool clamping- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2550 mmstroke of upper beam: 200 mmthroat: 300 mmdayligth: 440 mmworking feed: 9.0 mm/secreturn speed: 80.0 mm/sec: 265 barControl: konv. work height max.: 965 mmtotal power requirement: 15.0 kWweight: 10500 kgrange L-W-H: 3360 x 1750 x 2800 mmEquipment:- simple / conventional electro-hydraulic press brake- pivoting operation, front left- electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism- Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers- manual (jog mode) and automatic cycle selector switch- manual table crowning- split set of roe foot upper tools ... H = 210 mm- 1x as good as new universal V-die block, reversible with anti-corrosion grease V openings in mm : 12/35/25 50 10/20/16/16 75 Dimensions of ...
pressure: 30.0 tchamfer lenght: 800 mmback stop - adjustable: max. 420 mmstroke of upper beam: 100 mmdayligth: 310 mmworking feed: 10.0 mm/secreturn speed: 12.0 mm/secControl: VISION 120 oil volume: ca. 38.0 lvoltage: 380 Vtotal power requirement: 4.5 kWweight of the machine ca.: 890 kgdimensions of the machine ca.: 1250 x 950 x 1900 mm current new price approx. 24.000 euros special price on requestEquipment:- electro-hydraulic NC press brake - easy to operate- UNITRONICS VISION 120 NC control system for press depth back gauge (Y X axis)- NC electro-motorized back gauge (X axis) Input of target/actual value possible 2x manually adjustable stop fingers- Operation front right- Many different insert/bending tools Top tool holder : AMADA/PROMECAM- 1x freely movable foot switch- EMERGENCY OFF button at the front- Rear safety device- operating instructionsThe data for this ad was created with ...
pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 150 mm/secwork speed: 10.0 mm/secreturn speed: 140 mm/secwork stroke: 265 mmdayligth: 480 mmtable height: 900 mmtable width: 110 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 15000 kgrange L-W-H: 5000 x 2400 x 2850 mmALPMAC Manufacturer Video:https://www.youtube.com/watch?v=_FxXyPAcxlEhttps://www.youtube.c om/watch?v=YfkX9RwWv_0ALPMAC Product Video Model B:https://www.youtube.com/watch?v=lmT1tfy43WE------------------------- --------------------------------MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth--------------------------------------------------------! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52)! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMAN ...
pressure: 135 tbevel length: 4000 mmdistance between columns: 3150 mmcolumn arm: 270 mmtotal power requirement: 15 kwdimensions: 4030 x 1440 x 2420 mmmachine weight ab.: 9500 kgEquipment:- MNC 10 control unit- Electric backgauge ( X )- Positioning of the depth adjustment ( Y1 Y2 )- 2 stop fingers, manually adjustable- Rear side guard- Upper and lower toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mmEquipment:- CNC electro-hydraulic folding/die bending press- DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tools and products library Graphical 2D programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front- CNC axis adjustment: Y1 - Y2 - X - R axis CNC crowning Manual adjustm ...
pressure: 200 tchamfer lenght: 4000 mmdistance between columns: 3550 mmControl: Delem weight of the machine ca.: 20.000 kgdimensions of the machine ca.: 5000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 040 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATL 550 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmEquipment:- NC-controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front- Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis)- Tool holder system A - with top wedge crowning- Split insert/bending tools- Lateral safety guards- rear safety guard- 1x freely movable double foot swit ...
pressure: 035 tchamfer lenght: 1250 mmdistance between columns: 1070 mmpiston stroke: 150 + 60 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 470 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sectable width: 140 mmControl: ELGO NC Number of working hours: ~ 9.600 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2200 kgrange L-W-H: 1800 x 1450 x 2150 mm Well maintained condition With only approx. 9.600 operating hours ()Features:- Robust NC-controlled hydraulic press brake- With ELGO NC control unit P8822” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swiveling control panel, front left- NC electric motorized backgauge (X axis) With 2x stop fingers, manually adjustable (R+Z axis)- 1x split set of pointed tools - top- 1x rotatable Multi-V die block- Side safety device (swivel doors)+ FIE ...
pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATL 550 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmEquipment:- NC-controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front- Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis)- Tool holder system A - with top wedge crowning- Split insert/bending tools- Lateral safety guards- rear safety guard- 1x freely movable double foot swi ...
압력: 참펀 길이: mm 열간 거리: 총 전력 요구량: kW 기계 무게 약 : 필요한 공간: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.
pressure: 220 tchamfer lenght: 3200 mmdistance between columns: 2700 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 3600 x 2000 x 2900 mmweight: 11.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 tchamfer lenght: 3200 mmdistance between columns: 2700 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 200 mmdayligth: 480 mm: 200 mm/sbending speed: 0-10 mm/s: 120 mm/stotal power requirement: 7,5 kWdimensions: 3600 x 1800 x 2700 mmweight: 8.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tchamfer lenght: 2500 mmdistance between columns: 2100 mmcolumn arm: 250 mmdayligth: 325 mmControl: ATL 550 weight: 7700 kgrange L-W-H: 4000 x 1800 x 2400 mmEquipment:- ATL 550 control unit- FIESSLER laser protection- Electric back gauge ( X )- Positioning of the depth adjustment ( Y1 Y2 )- 2 stop fingers, manually adjustable- Rear side guard- Upper and lower toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 330 tchamfer lenght: 6100 mmdistance between columns: 5600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 160 mm/sbending speed: 0-9 mm/stotal power requirement: 32 kWweight of the machine ca.: 36.000 kgdimensions: 6970 x 2300 x 4150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 tchamfer lenght: 3550 mmdistance between columns: 3000 mmControl: Cybelelc DNC 1200 total power requirement: kWweight of the machine ca.: 18.500 kgdimensions of the machine ca.: 4300x2750x3750 mmAccessories:- 2-hand foot switch- Lasersafe Fisseler- Hydraulic tool clamping at top and bottom- Die shift- Hydraulic crowning- Support arms- Cybelec DNC 1200 control- 1 set of upper and lower tools- Controlled axes y1, y2, x, r, z1, z2, inclined stop- Protective grilleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 225 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcontrol: CYBELEC DNC 1200 PS Eco stroke: 550 mmtable height: 700 mmthroat: 405 mmdistance between table / ram: 320-870 mmcolumn arm: 405 mmweight of the machine ca.: 14.000 kgAccessories / equipment:- controlled axes: Y1 - Y2 - X - R- Z1 and Z2 can be moved manually- Lasersafe angle measurement- Pneumatically adjustable support table- pneumatic upper and lower tool clamping- 2-hand foot control- manual crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 tchamfer lenght: 3000 mmdistance between columns: 3100 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 15 kWweight of the machine ca.: 11.500 kgdimensions: 4080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 330 tchamfer lenght: 3100 mmdistance between columns: 2600 mmControl: Cybelec VisiTouch 24 throat: 500 mmdayligth: 500 mmstroke: 300 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 18.500 kgdimensions: 3900 x 1970 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 330 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmArm length: 500 mmdayligth: 500 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 21.000 kgdimensions: 4850 x 2300 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 4500x2000x2900 mmweight: 13.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chamfer lenght: 0900 mmplate thickness: mmdistance between columns: 900 mmpressure: 20 tcolumn arm: 230 mmstroke length max.: 150 mmtravel -x axis: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 120 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 155 mmthroat: 350 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 77.0 mm/secControl: P 40 work height max.: 878 mmtable width: 104 mmoil volume: 150 ltotal power requirement: 11.0 kWweight: 7550 kgrange L-W-H: 3550 x 2150 x 2600 mmEquipment:- NC electro-hydraulic press brakes- with NEW ELGO NC control unit P40 New price approx. 4.000 Euro Control / movement of the backgauge - X axis (target/actual input) Control / movement of the depth setting - Y axes (target/actual input) Inching mode for X axis Y axes also possible- Swivel operation, front left- NC controlled axes : Y1 Y2 X- NC electro-motorized backgauge (X axis) with 2x manually adjustable stop fingers including lateral and height adjustment (Z R axis)- 1x branded set of upper tools (split)- 1x branded Multi-V bottom die ...
pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 310 mmstroke: 200 mmajustment speed: 80.0 mm/secworking feed: 10.0 mm/secreturn speed: 58.0 mm/secdayligth: 385 mmtable width: 240 mmwork height max.: 885 / 1050 mmoil volume: 180 ltr.total power requirement: 15.0 kWweight of the machine ca.: 9850 kg.range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=o_t9BBMsNNsEquipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display- swiveling operation, mou ...
pressure: 185 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 175 mm/sbending speed: 0-12 mm/stotal power requirement: 22 kWweight of the machine ca.: 15.500 kgdimensions: 4970 x 3260 x 2090 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 18 kWweight of the machine ca.: 13.000 kgdimensions: 5080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력: 85 tc모따기 길이: 2750 mm기둥 간 거리: 2260 mm총 전력 요구 사항: 17 kW기계 무게 약 : 8.300 kg기계 크기 약 : 3800 x 2300 x 2400 mm액세서리 / 장비 : - TRUMPF TASC 6000 - 기계 앞에 2 개의 지지 암 - Lazersafe이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션 인 ModulMWS로 작성되었습니다.
압력: 320 tc모따기 길이: 4100 mm스트로크: 350 mm총 전력 요구 사항: 32 kW기계 무게 약 : 23.500 kg기계 치수 약 : 4300x2600x3400 mm이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS를 사용하여 작성되었습니다.
pressure: 100 tchamfer lenght: 3000 mmdistance between columns: 2550 mmstroke: 150 mmtotal power requirement: . kVANumber of working hours: . hworkpiece: workpiece: Number of strokes: total power requirement: kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: mBack gauge 400mmThroat 250mmSpeed: 8mm /SkW: 6,5Volts: 380 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch Tea ...
: 150 t: 3100 mm: 2600 mm: 400 mm: 270 mm: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tchamfer lenght: 4050 mmdistance between columns: 3550 mmControl: CYBELEC ModEva Pac throat: 350 mmdistance between table / ram: 430 mmtable width: 250 mmstroke: 250 mmtotal power requirement: 18,5 kWweight of the machine ca.: 16500 kgdimensions of the machine ca.: 4400x2100x3200 mmEquipment/accessories:- Control conversion at the end of 2018- Electric backgauge 1250 mm- 10-stage die displacement- crowning- EHT 26 mm tool holder- Axes controlled: Y1,Y2,X,R- Sheet metal holding table- 4x manually adjustable stop fingers- pneum. Upper tool clamping- Safety light curtain- 3x height-adjustable support arms- Oil cooler- 2-hand foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력: 50 tc모따기 길이: 2500 mm기둥 간 거리: 2050 mm테이블 너비: 140 mm테이블 높이: 750 mm총 전력 요구 사항: 8 kW기계의 무게 ca.: 4,5 t기계의 크기 ca.: 3, x 1,2 x 2,6 m장비:• 수동 백 스톱• 상부 및 하부 도구• 2 수동 조작/풋 스위치이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.
pressure: 50 tchamfer lenght: 2500 mmdistance between columns: 2050 mmthroat: 200 mmtable width: 140 mmtable height: 750 mmdistance table - lower edge of ram: 300 mmmax. ram stroke: 100 mmclosing speed: 9 - 160 mm/secreturn speed: 55 mm/secvoltage: 380 V / 50 Hzengine output: 4,1 kWtotal power requirement: 5 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 3, x 1,2 x 2,6 mEquipment:• manuel back stop• upper and lower tools Split , lower tool 2000 mm long• 2 manual operation / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: max. 800 mmoil volume: 150 ltr.voltage: 400 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours--------------------------------------------------CNC press brake with special equipment Version ERGO - knee room for the operator flexible articulated arm mount for the controller increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color s ...
pressure: 300 tchamfer lenght: 4100 mmdistance between columns: 3710 mmstroke - stepless adjustable: 250 mmcolumn arm: 330 mmdayligth: 500 mmtable height: 940 mmtable width: 250 mmworking feed: 7.0 mm/secreturn speed: 90.0 mm/secControl: konv. operating pressure: max. 305 barvoltage: 380 Vtotal power requirement: 22.5 kWweight: 25200 kgrange L-W-H: 4320 x 2100 x 3500 mm well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=rPOBwTfVReoEquipment:- simple, conventional hydraulic press brake- swiveling control panel, left front- electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front- with 3x stop fingers, manually adjustable- electro-motoric depth adjustment (Y1+Y2 axis) with analog position display- 1x split set of 85° deer foot upper tool- 1x MultiV - uni ...
pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 12.0 mm/minreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmtable width: 90.0 mmvoltage: 400 Volttotal power requirement: 15.0 kWweight: 9800 kgrange L-W-H: 4150 x 2150 x 2800 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A- ...
pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- FIESSLER AKAS - laser protection in front of the machine- Deer foot upper tool- Universal die block- manual table crowning- Safety device: light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1200 mmcolumn arm: 200 mmram stroke speed: 60.0 mm/secreturn speed: 80. mm/secwork speed: 60.0 mm/secwork stroke: 100 mmtable height: 760 mmtable width: 150 mmoil volume: 130 ltr.voltage: 400 VoltControl: ESA E21 total power requirement: 4.0 kWweight: 3030 kgrange L-W-H: 2050 x 1800 x 2030 mm Demonstration/demo machine () From our showroom (like new) With very few operating hoursFurnishing:- compact hydraulic press brake- BERNARDO NC control model E21- swiveling control panel- electrical adjustment of the backgauge- Back stop on recirculating ball spindles- electrical adjustment of the immersion depth- Laser protection device in front- Upper deer foot tool - divided- Tool holder with quick change system- Universal die block- side + rear protective device- 2x front support arms- movable double foot switch (operation)The data ...
pressure: 125 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 120 mmajustment speed: 70.0 mm/secworking feed: 7.0 mm/secreturn speed: 60.0 mm/secdayligth: 325 mmtable width: 180 mmwork height max.: 915 mmoil volume: 150 ltr.total power requirement: 12.5 kWweight of the machine ca.: 9100 kg.range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop ()Equipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display- swiveling operation, left-hand side- split deer foot + pointing tool- 1x rotatable Multi V univers ...
압력: 200 T샴퍼 길이: 3050 mm컬럼 간 거리: 2550 mm램 스트로크: 274 mm제어: Cybelec ModEva Pac 총 전력 요구 사항: kW기계의 무게 ca.: 17.000 kg기계의 치수 ca.: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.
pressure: 120 tchamfer lenght: . mmdistance between columns: 2550 mmstroke: 200 mmtotal power requirement: 13,2 kVANumber of working hours: 2500 htotal power requirement: kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 150 t: 3100 mm: 2600 mm: 400 mm: 200 mm: 600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmControl: Cybelec weight of the machine ca.: 11.600 kgdimensions of the machine ca.: 4000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력: 160 tchamfer 길이: 3200 mm제어: CYBELEC CybTouch 15 PS 기계 무게 약: 14.000 kg기계 치수 ca.: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.
pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mm• Basic version as a C-frame• Compact table model• Ideal for prototypes and small series• Very short setup time• Functionally simple• Wide range of applications• Low noise level• Low energy consumption• Easy handlingincluding special equipment:- CNC control DELEM DA 41TThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
컬럼 간 거리 : 300 mm테이블 길이 : 3550 mm테이블 너비 : 190 mm테이블 높이 : 800 mm컬럼 간 거리 : 3230 mm컬럼 암 : 300 mm기계 무게 ca : 12,5 t기계 치수 ca : 1600 x 3800 x 2800 m
압력: 100 T샴퍼 길이: 2050 mm총 전력 요구 사항: 11 kW기계의 무게 ca.: 5,9 T기계의 크기 ca.: m- 램 조정: 150 mm- 램에서 테이블까지의 거리: 400 mm- 스트로크: 150 mm이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.
