범용 처리 센터 (86)

Operating hours 51488 h, 60 tool positions, max. tool length 350 mm, max. tool weight 10 kg, max. feed speed X/Y/Z axis 50000 mm/min, rapid traverse X/Y/Z axis 50 m/min, max. feed force X/Y/Z axis 10 kN, space requirement 6600x5400x2750 mm Auction-ID: A1-47475-9

Operation unknown Auction-ID: A1-46783-13

Operation unknown Auction-ID: A1-46783-12

Auction-ID: A1-47218-7

Machine number: 11790001067Operating voltage: 400 VFrequency: 50/60 HzRated current: 100 AConnection: 40 kVAControl: SIEMENS SINUMERIK 840 DSpindle speed: 42,000 rpmFeed in X/Y/Z axis: up to 40,000 mm/minInput fineness X/Y/Z axis: 0.001 mmRapid traverse in X/Y/Z axis: 40 m/minDisplacement measuring system Resolution X/Y/Z axis: 0.001 mmPosition tolerance in X/Y/Z axis with direct measuring system: 0.005 mmtravel X-axis: 200 mmTravel Y-axis: 200 mmTravel Z-axis: 280 mmTool holder: HSK-32 Eincl. 24-fold tool changerMax. tool length from spindle nose: 200 mmMax. tool diameter: 40 mmMax. tool weight with automatic tool change: 1 kgwith total tool weight in magazine: 24 kgNC rotary table with swivel axisC-axis Clamping surface: 190 mm diameterRotation range: 360 °rotation rotary table: 360 °rotation table: 150 rpmA-axis Swivel range: -5/+130°Loading: max. 10 kgincl. the tool holders in t ...

Machine number: 71401453Operating voltage: 400 VFrequency: 50 HzRated current: 80 AConnection: 44 kVASpindle hours read: 26350Control: MILLPLUSSpindle speed: up to 12000 rpmFeed X/Y/Z axis: 20 - 15000 mm/minRapid traverse X/Y/Z axis: 40 m/minDisplacement measuring system Resolution X/Y/Z axis: 0.001 mmInput gauge X/Y/Z axis: 0.001 mmPosition tolerance in X/Y/Z axis: 0.010 mmTravel X-axis: 600 mmTravel Y-axis: 700 mmTravel Z-axis: 600 mmTool holder: SK 40incl. 60-fold tool changerMax. tool diameter: 100 mmMax. tool length from spindle nose without tool breakage monitoring: 350 mmNC rotary table Clamping surface: 630 mm DiameterDistance between T-slots: 63 mmNumber: 9Centering bore: 50 mm DiameterMax. rotation of table top: 10.7 rpmFeed: 3600°/minResolution of the measuring system: 0.001°incl. chip conveyor and cooling systemAttention: the machine can be transported on a truck with a w ...

Serial number: 498-56Important note: A new spindle has recently been installedTravel paths: X: 800 mm Y: 500+50 mm Z: 550 mmSpindle speed: 12000 rpmTool holder: SK 40Number of tool positions: 40Control: SIEMENS SINUMERIK 840 Dincl. chip conveyor from KNOLL, paper belt filter system from KNOLL, zero-point clamping system from SCHUNK Type: SDE 138Table dimensions: 850 x 350 mmincl. the tool holders and tools on the tool changerincl. touch probe as shown in the pictures Atruck with a width of 3000 mm is required for transportReference: Wittner - Lot 11 Auction-ID: A7-46763-369

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2003 Serial number: 182.012 Machine Type: CNC Universal Machining Center Operating voltage: 3/PE AC 400 V / 50 Hz Spindle power: 14.5 kW Rated current: 85 A Connected load: 60 kVA Configuration Double station / multi-sided machining Automatic tool changer Chip conveyor / filter system Full fairing Integrated control cabinet Auction-ID: A7-47277-7

Auction-ID: A1-47219-11

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: CHIRON Type: FZ 08 B/W Year of Make: 2000 Machine Type: CNC Vertical Machining Center Control: Siemens Sinumerik Operating voltage: 3/N/PE 400 V Frequency: 50/60 Hz Control voltage: 230/24 V Connected load: approx. 21 kVA Rated current: approx. 35 A Configuration Double clamping system / pendulum operation 2 clamping stations NC sub-unit Peiseler AWUP 100 Automatic tool changer Cooling lubricant system Extraction system Full fairing Compact design for series production Auction-ID: A7-47277-9

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2008 Serial Number: 1820031 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Machine weight: approx. 8,000 kg Configuration Siemens CNC control Double station / multi-sided machining Automatic tool changer Chip conveyor (KNOLL) Cooling lubricant and filter system (KNOLL) Full fairing Suitable for series production Auction-ID: A7-47277-6

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 SC3 Year of Make: 2007 Serial Number: 1820027 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Configuration Siemens CNC control Automatic tool changer Double station / multi-sided machining Chip conveyor Cooling lubricant system Full fairing Control cabinet Auction-ID: A7-47277-2

CNC Bar Machining Center for Aluminum, Machine No. 6100013187, control Beckhoff C6140 renewed in 2020, infeed of extrusion profile magazine length max. approx. 6000 mm, machining units (drilling / milling: vertical top 1 piece / vertical bottom 4 pieces / horizontal front 1 piece / horizontal rear 1 piece) and (sawing 3 pieces: 45 / 90 / 45 degrees), outfeed belt max. approx. 2700 mm, chip conveyor belt (The article is in condition as existing and unchecked. The article is sold from the foundation and without content/material! For the dismantling and loading of the item, there are no pallets, other packaging material available on site and the buyer must rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary! Mediation of dismantling and loading possible. Contact: Dejan Ducic / dejan.ducic@surplex.com Auction-ID: A7-47228-14

Electrospindle power 7.5 kW, rotation speed 8000 rpm 4th and 5th axis rotary table 5-axis control Stroke X=450 mm Stroke Y=350 mm Stroke Z=400 mm Auction-ID: A7-47148-2

Includes oil cooler, cooling water mixer, 30 tool holders and various accessories Auction-ID: A1-43894-1

Equipped with 30 tool holders and various accessories Auction-ID: A1-43894-2

CONTROLS  CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   X-axis travel: 600 mm  Y-axis travel: 450 mm  Z-axis travel: 450 mm  rotating range B-axis from: -115 °  rotating range B-axis up to: 30 °  rotating range C-axis from: 0 °  rotating range C-axis up to: 360 °TABLE  clamping surface diameter: 450 mm  workpiece load (max): 200 kgSPINDLE / HEAD  spindle revolutions (max): 20000 /minAXIS DRIVES  rapid traverse X: 22000 mm/minTOOL MAGAZINE  number of positions: 220 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 4400 mm  space requirements -front/back-: 3400 mm  total height: 2700 mm  total weight approx.: 8000 kgATTACHMENTS  digital display: yes   chip conveyor: yes   coolant unit: yes   band filtra ...

x-이동: 200 mmy-이동: 200 mmz-이동: 280 mm 제어: HEIDENHAIN iTNC 530 테이블 - 회전 가능 +/-: -10 / +130 -C축 테이블 회전: 360 밀링 헤드: 42000 rpm 공구 조각 매거진, 기계 무게 약 60 Werkzeugplätzen 약 5 크기 기계 크기 약 2 x 2 x 2.4 m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

CONTROLS  CNC controls HEIDENHAIN ITNC 530 BASIC DESIGN  basic design: bed type WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   .. among of them simultaneous CNC axes: 3   X-axis travel: 3500 mm  Y-axis travel: 1200 mm  Z-axis travel: 1400 mmTABLE  workpiece load (max): 4000 kg  - mode of operation: automatic SPINDLE / HEAD  - positioning/indexing: 2.5 °  - positioning/indexing: 2.5 °  spindle revolutions (max): 4000 /min  tool fixture: ISO SK 50 AXIS DRIVES  rapid traverse: 20000 mm/minTOOL MAGAZINE  magazin type: chain magazine   number of positions: 30 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 13500 mm  space requirements -front/back-: 5000 mm  total height: 3850 mm  total weight approx.: 24000 kgATTACHMENTS  angular milling hea ...

x-travel: 1250 mmy-travel: 850 mmz-travel: 800 mmControl: Heidenhain MillPlus total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 800 mmz-travel: 800 mmcontrol: SIN840D spindle turning speed - stepless: 5 - 10.000 U/minpower capacity at 40 % load: 38,00 KWpower capacity at 100 % load: 25,00 kWmax. torque at 40% / 100% load: 288 / 187 kWspindle diameter in front bearing: mmspindle taper: HSK 100 feed X/Y/Z/-axis: 0 - 60.000 mm/minrapid traverse X/Y/Z: 60,00 m/minfeed capacity X/Y/Z: 12,00 kNB - axis: 180 x 0,001 °rapid travel B-axis: 10,00 U/minsize of pallet: 800 x 630 mmtable load: 0,80 tC-axis: 360 x 0,001 °rotary table speeds infinitely variable: 1 - 800 U/minpower capacity - table: 13,85 kWmax. torque on the faceplate: 1.550 Nmtoolpiece magazine: chain magazine: 60 Stücktool diameter: 110 mmwotkpiece diameter with 2 vacant positions: 230 mmtool length - max.: 450 mmweight of tools max.: 30,00 kgtotal power requirement: 80,00 kWweight of the machine ca.: 18,00 tdimensions of the mac ...

x-이동: 500 mmy-이동: 450 mmz-이동: 400 mm 제어: SIEMENS 840D 테이블 - 회전 가능 +/-: +110 / -5 -C축 테이블 회전: 360 공구 조각 매거진, 기계 무게 16 Werkzeugplätzen, 약 3.9 기계 크기: 2.9 x 2.0 x 2.5 m. 이 광고 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

x-travel: 2800 mmy-travel: 2200 mmz-travel: 800 mmControl: Heidenhain iTNC 530 table surface area: 3000 x 1200 mmtool taper: HSK-A-63 spindle turning speed range: 12000 U/minpower capacity: 18 kWfeed range: 35000 mm/mintotal power requirement: 68,7 kWweight of the machine ca.: tdimensions of the machine ca.: 12,4 x 3,5 x 4,6 mThe FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components.With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing.Heidenhain iTNC 530 CNC path controlNumber of controlled axes (simultaneously): X/Y/Z/C/BTravels:X-axis (longitudinal travel) 2800 mmY-axis (cross travel) 2200 mmZ-axis (vertical travel) 800 mmMachine length: 12,434 mmMachine width: 3,597 mmMachine height: 4,622 mmCoolant equipment (no coolant through spindle)C ...

X-트래블: 800 mmy-트래블: 700 mmz-트래블: 600 mm 회전 속도: 12000 1 U/min: 제어: Heidenhain 총 전력 요구량: 59 kW 기계 무게 약 10.6 t. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

x-이동: 800 mmy-이동: 600 mmz-이동: 500 mm 총 전력 요구량: kW 기계 무게 ca.: 기계 tdimensions ca.: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

x-travel: 3.000 mmy-travel: 1.000 mmz-travel: 860 mmControl: Heidenhain iTNC-530 table-size: 3.600 x 1.050 mmT-slots: 7 x 18 T - slots distance: 125 mmdistance table - lower edge spindle: 25-366 mmtable weight: 4.200 Kgb-axis: +-105 °c-axis: +-360 0rapid travel x/y/z: 30.000 mm/minrotary table: Durchm. 1.000 mmmax. turning diameter: 1.400 mmnumber of spindle speeds: 9.000 U/min/rpmtool taper: ISO-50 DIN 69871-AD spindle drive: 28,5 kWmax. torque on the spindle: 240 Nmtool change unit: AITEK, 40 fach: 20 handwheel: Ink. Shuttle operation: Inkl Chip coveyor: Ink. Internal cooling system: 20 bartotal power requirement: 65 kWweight of the machine ca.: 24,8 tdimensions of the machine ca.: 8.056 x 5.496 x 3.790 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-트래블: 1.000 mmy-travel: 1.000 mmz-트래블: 1.000 mm제어: SINUMERIK 840D pl 스핀들 회전 속도 - 무단: U/min총 전력 요구 사항: kW기계의 무게 ca.: 기계의 t치수 ca.: SIEMENS SINUMERIK 840D pl 제어가 있는 m5축 머시닝 센터, 전자. 핸드휠, NC 스위블 로터리 테이블 1,000mm, 스핀들을 통한 절삭유, 칩 컨베이어, 180배 공구 매거진 HSK100, 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

Control: HEIDENHAIN iTNC-530 for axes: 5 x-travel: 712 mmy-travel: 508 mmz-travel: 515 mm-A-axis table swivelling: +30/-120 °-C-axis table rotating: 360 °rotary table dia.: 330 mmno. of tools in magazin: 60 max. tool diameter: 88 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 280 mmmax. tool weight: 7 kgspindle taper: SK40 Big Plus spindle turning speed range: -15000 U/minpower capacity - milling spindle: 25 kWweight of the machine ca.: 12.8 tdimensions of the machine ca.: 303x395x367 cm3D measuring tracer: RENISHAW Zero point clamping system:: LANG TECHNIK Coolant through spindle: pressure: 20 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: HEIDENHAIN TNC-430 x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmB-axis (table): 280 mmtable swivelabel +/-: 220 (+/-110) °-C-axis table rotating: 360 °tool magazin:: 30 spindle taper: HSK63 spindle turning speed - stepless: -15000 U/minrapid traverse feeds rotary table: 36 U/minrapid travel x/y/z: 36 m/minOverall size: 3800X3600X3000 mmweight of the machine ca.: 8.5 tCoolant through spindle: pressure: 40 Bar3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: SIEMENS 840Dwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: HEIDENHAIN iTNC-530 x-travel: 885 mmy-travel: 800 mmz-travel: 520 mmB-axis (table): +30/-120 °c-axis: 360 °table-size: 600x500 mmtool magazin:: 60 spindle taper ISO: 40 Big Plusspindle turning speed - stepless: 15000 U/mintotal power requirement: 25 kWrapid travel x/y/z: 36 mm/minrapid traverse (slewing motion): 60 U/minrapid traverse feeds rotary table: 100 U/mindimensions of the machine ca.: 3.8x3.6x3.0 mweight of the machine ca.: 12,1 tCoolant through spindle: pressure: 20 bar3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-트래블: 762 mmY-트래블: 508 mmZ-트래블: 508 mmB-축(테이블): +120/-35 GradC-축: 360 Grad제어: HAAS für 5 Achsentool piece magazine with: 40 Plätzen스핀들 속도 수: 12000 U/min기계 치수 ca.: 4.3 x 2.35 x 2.8 m기계 무게 ca.: 8.5 t

x-travel: 550 mmy-travel: 410 mmz-travel: 450 mmb-axis: +110/-110 °spindle turning speed range: -15000 U/minspindle taper: BT Big Plus 40 tool change unit: 40x size of pallet: 2x D-250 mmweight of the machine ca.: 8.6 t5 axes machining centerFANUC G-Tech 30iCoolant through spindle3D measuring probeTool measuring deviceMisc palletsMisc tool holdersMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmControl: HEIDENHAIN iTNC 530 Table dimensions: 500 x 380 mmtable weight: 500 Kgc-axis: 0.001º ( ± 360º) 0b-axis: 180 °rapid traverse X-axis: 80 m/minfeeds: 50 m/minspindle turning speed range: 18.000 U/minspindle taper: BT- 40 spindle drive: 30 kWInternal cooling system: 40 barhandwheel: HEIDENHAIN HR-410 total power requirement: 50 kVAweight of the machine ca.: 6,5 tdimensions of the machine ca.: mChip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-트래블: 762 mmY-트래블: 508 mmZ-트래블: 508 mmB축(테이블): +120/-35 Gradc축: 360 등급제어: HAAS für 5 Achsen툴피스 매거진: 40 Plätzen스핀들 속도 수: 12000 U/min기계 크기 ca.: 4.3 x 2.35 x 2.8 m기계 무게 ca.: 8.5 t

X-트래블: 1600 mmY-트래블: 900 mmZ-트래블: 800 mm제어: Heidenhein iTNC 테이블 크기: 1700x850 mm테이퍼 ISO: ISO 40 회전 속도: 10000 U/min공작물: 랜덤 30핀 테이블 무게: 2000 Kg급속한 횡단:: 20 m/min내부 냉각 시스템: 20bar총 전력 요구 사항: 18kW기계의 무게 ca.: 18600 kg기계의 치수 ca.: m

x-travel: 630mm y-travel: 560mm z-travel: 560mm제어: Heidenhain TNC 430 총 전력 요구 사항: 26kW 기계 중량 약: 6500 t 공간 요구 사항 약: m 속도 12,000rpm급지 속도 20-10,000 mm/min 급속 횡단 X/Y/Z 26/26/20 m/min공구 체인저 24배스핀들 홀더 SK 40 테이블 클램핑 표면 1000x600 mm총 전력 요구 사항 26kW기계 무게 약 6,500 t액세서리/장비: - B 축 (NC 밀링 헤드) - 24 배 공구 체인저 - 전기 핸드휠 - 칩 나사 - 냉각수 장치이 광고의 데이터는 ModulMWS - LogoTech oHG의 기계 관리로 작성되었습니다.