max. wheel diameter: 600 mmgear width: 500 mmmax. module: 15 min. module: 1 total power requirement: 2 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2x1,5x2 mThe rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles availab ...
max. workpiece diameter: 100 mmmin. workpiece diameter: 10 mmworkpiece length: 1000 mmtotal power requirement: 16 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 0 mThe guides have been outdated 10 years agoThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 350 mmy-travel: 250 mmz-travel: 300 mmControl: SINUMERIK 828 D distance spindle nose and table: 120 -420 mmsurface area: 520 X 300 mmtable weight: 100 KgT-slots: 5 T - slots distance: 45 mmT - slots - width: 12 mmturning speed range - milling: 0 - 10.000 U/minTorque: 33/41 0spindle drive: 7/8,5 kWTool taper: SK - 30 : 20 fachtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 63 mmsquare edge steel: 55 mmflat steel: 100 x 25 mm: engine: 380 V, 6,3 kW weight: ca. 2.450 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pointing milling machine: für Stangen carbide turnover plates: 4 Stück working area: Rund, Profil+vierkant mmworking range: 80 (100) an 25 mmmilling drive: 380/420V, 18,5 KW, 50 Hz kWrevolutions per minute: Fräsantrieb: 1465 U/min: . clamping devices hydraulic pneumatic: hydraulisch infeed device: hydraulisch : ca. 5 lfdm x 300 mm : hydraulic power unit: Rexroth tank: 250 lcoolant tank: mit Spänekasten lcontrol panel: switchgear cabinet: mit Klimaanlage control: SIEMENS S 7-300 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.200 mmy-travel: 600 mmz-travel: 675 mmControl: Heidenh.iTNC 620 HSCI FS table-size: 1.220 x 620 mm: 40 fachDistance between table and spindle: 735 mmturning speeds: 10.000 U/minspindle drive: 18 kWInternal cooling system: 30 bartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m-Electronic steering wheel.-LINEAR RULES.-Laser probe measuring tools.-Preparation for piece measuring probes. PROBE NOT INCLUDED.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X-트래블: 530mm Y-트래블: 600mm Z-트래블: 300mm0: 7 bar공기 소비량: 70-90 Nl/min.전압: 120/230V+-5% kVA총 소요 전력: 1,5kW기계 중량 ca.: 22t기계 치수 ca.: m
테이블 길이: 600 mm 테이블 너비: 400 mm X축: 400 mm Y축: 300 mm Z축: 350 mm 공작물 크기: 900 x 630 x 350 mm볼륨: 490 L총 전력 요구 사항: kW기계 ca.의 무게: t기계의 치수 ca.: m
x-travel: 550mm y-travel: 1200mm z-travel: 450mm제어: 85 8비트 총 전력 요구 사항: kW기계 무게 약: t공간 요구 사항 약: m 프로브 헤드: MT-TAWE 컨트롤 패널 PC 랙 레퍼런스 버튼 6 x 교체 가능한 플레이트 교정 볼 및 기타 버튼은 더 이상 사용할 수 없습니다. 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.
