: gebraucht : WA0089 : 142 €: 1 : 835 mm: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0013 : 265 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Omschrijving Lengte mm Aantal 보벤메스 H=66.5mm, R=0.8 85gr 835 2 보벤메스 H=66.5mm, R=0.8 85gr 415 2 보벤메스 H=66.5mm, R=0.8 85gr 300 1 보벤메스 H=66.5mm, R=0.8 85gr 150 1 보벤메스 H=66.5mm, R=0.8 85gr 50 1 보벤메스 H=66.5mm, R=0.8 85gr 40 1 보벤메스 H=66.5mm, R=0.8 85gr 20 1 보벤메스 H=66.5mm, R=0.8 85gr 15 2 보벤메스 H=66.5mm, R=0.8 85gr 10 1 보벤메스 H=66.5mm, R=0.8 85gr 왼쪽 100 1 보벤메스 H=66.5mm, R=0.8 85gr 오른쪽 100 1 Ondermatrijs V10, R=0,8, 85gr 835 2 Ondermatrijs V10, R=0,8, 85gr 415 2 Ondermatrijs V10, R=0,8, 85gr 300 1 Ondermatrijs V10, R=0,8, 85gr 150 1 Ondermatrijs V10, R=0,8, 85gr 50 1 Ondermatrijs V10, R=0,8, 85gr 40 1 Ondermatrijs V10, R=0,8, 85gr 20 1 Ondermatrijs V10, R=0,8, 85gr 15 2 Ondermatrijs V10, R=0,8, 85gr 10 1 토탈 26 가격은 €2250,-- 새 프리즈 € 3250,--
: gebraucht : WA0052 : 292 €: 1 : 835 mm: 80 mm: 16 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
아마다 HFE 80-25 연도: 1999년 11월 작업 길이: 2550 mm 스탠드 폭: 2125 mm 압착력: 80톤 CNC 제어: AMADA OPERATOR II 그래픽 제어 축: Y1/Y2; X1/X2; R1/R2; Z1/Z2 모트. 조절 가능한 백 게이지 스트로크: 200mm 투사량: 420mm 왕관 착용 작업 높이: 960 mm 엔진 출력: 9 kW CE 마크 크기(길이 x 너비 x 높이): 약 3000 x 2250 x 2250 mm 무게: 약 6톤
: gebraucht : WA0053 : 292 €: 835 mm: 80 mm: 16 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
벤딩 벤치 게카 최대 너비 2.03m 두께 1mm 스케일 180° 벤딩 빔 스프링 지원 길이 2.40 m 폭 0.80 m 높이 1.10 m 무게 500 kg
: gebraucht : WA0054 : 292 €: 1 : 835 mm: 80 mm: 16 mmMint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
접이식 벤치 TEKO 시트 두께 1.9 mm 유효 길이 2025 mm 길이 2500 mm 폭 650 mm 고도 1080 mm 무게 500 kg
: gebraucht : WA0145 : 840 €: 1 : 3100 mm: 40 mm: 115 mmslightly crankedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0008 : 325 €: 1 : 835 mm: 120 mm: 12 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
사양: - 압력 용량 2000 kN - 최대 작동 폭 3100 mm - 스탠드 통로 3200 mm - 스탠드 방전 300 mm - 최대 설치 높이 965 mm - 스트로크 또는 오프셋 깊이 무한히 조정 가능 0 - 400 mm - 램 속도 앞으로 + 각 100 mm / sec를 반환합니다. - 9 단계로 작업 속도 선택 가능 1 - 10 mm / sec - 400 V / 26.5 kW 구동 - 대략적인 공간 요구 사항. W 4400 x H 3500 x D 2200 mm - 대략 무게. 18500 킬로그램 - 와 함께 : - CNC - 제어 CYBELEC ModEva 15S 내장 2007 - 4 개의 제어 된 pneum이있는 백게이지. 옆의 높이 조절 가능한 스톱 핑거 - 정지 영역에서 제어 된 굽힘 보조 장치 - 수력. - 니움. 상부 공구 + 하부 공구의 클램핑 - 모트. 크라운팅/하이드로 쿠션 테이블 - 측면 이동 가능한 지지대 - E - 풋 스 ...
: gebraucht : WA0066 : 860 €: 1 : 550 mm: 220 mmmint conditiondividedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
사양: 작동 길이 1250 mm - 스탠드 통로 1050 mm - 최대 가압력 80 t - 스트로크 250 mm - 스탠드 방전 300 mm - 테이블 사이의 설치 높이 - 프레스 빔 560 mm - 리프팅 속도 - 하향 속도 유휴 최대 100 mm / 초 - 상향 속도 100 mm / 초 - 최대 하향 프레스 속도. 12mm/초 - 총 구동 전력 15kW - 대략적인 공간 요구 사항. W 1750 x H 3400 x D 2000 mm - 대략 무게. 8500 킬로그램 - 와 함께 : - CNC - 제어 CYBELEC DNC 7400 PSGY - 제어 X - 차축 백게이지 5 - 1000 mm - Z - 세 단계의 축 pneum. 높이 조절 가능 - 수동으로 움직일 수 있고 접을 수 있는 정지 손가락 - 제어된 공압 다이 변위 - 수력. 공구 클램핑 - 수동 크라운 - 2 조각 지원 팔 - 샤프닝 공구 분할 H 320 x L 1000 mm - 사슴 발 ...
: gebraucht : WA0067 : 860 €: 1 : 515 mm: 220 mmmint conditiondividedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Italien Eurostamp Tooling is quality,competence and precision.Since 1970, we have been producing exceptionally precise tools and offering extremely high-quality solutions for all those customers who constantly require the highest level of performance and reliability.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0187 : prompt, Zwischenverkauf v : 2912 €: 1 mint condition3 x 835 + 1 x 835 mm sectionedATTENTION: 50T toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0138 : 1960 €: 1 : 3100 mm: 200 mmslightly crankedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0032 : 228 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0149 : 690 €: 1 : 3010 mm: 24 mm: 160 mm: 10 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0137 : 1960 €: 1 : 3000 mm: 190 mmslightly crankedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 00821 : prompt, Zwischenverkauf v : 1210 €: 1 : 805 mm88°, R=0.6MM H=115MM, Split into left horn section 100/370/10/15/20/40/50/100/100 mm, right horn section, made from 42CrMo4 tool steel, induction-hardened to 54-60 HRC,polishedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0043 : 129 €: 1 : 835 mmPhase: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0031 : 228 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0088 : 290 €: 1 : 835 mmdividedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: WA0136 : 3150 €: 1 : 8 mm: 3 x 1.000 & 1 x 1.050 mmcomplete 30°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0022 : 288 €: 1 : 415 mm: 6 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0041 : 790 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 125 mmplate thickness: 2 mmstraightening feed: 5-30 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 460 tSheet width: 125 mmSheet thickness: 2 mmStraightening speed: 5 – 30 m/minTotal power requirement: 1.5 kWMachine weight: approx. 460 kg(The value 460 t is almost certainly a typo, based on this machine size, 460 kg is the plausible specification.)Strip infeed height: 1,250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 0,5...5 mmpunching force: 20 ttravel -x axis: 1250 mmtravel -y axis: 750 mmnumber of strokes: 20 per minram stroke max. - stepless: 40 mmtotal power requirement: 14 kWweight of the machine ca.: 5 t- max. thickness: 0,5 … 5 mm- travel in X : 1250 mm enlargeable to 2000 mm- travel in Y axis: 750 mm enlargeable to 1000 mm- number of strokes: 20 per min- stroke: 40 mm - Stanz- Ø 100 mm 1,5 mm-( punch diam. and thickn.) Ø 50 mm 3,5 mm Ø 16 mm 12,0 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0125 : 122 €: 1 : 835 mm: 0,4 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 500 mmmaterial thickness: 0,8-5 mmno. of straightening rolls: 7 sheet width: 500 mmplate thickness: 0,8 - 5 mmstraightening roll diameter: 80 mm2 pinch rolls, diameter: 80 mmAdjustable entry heightPass line: 505 mmOiling systemRoller cageStrip guide: 505 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0127 : 1230 €: 1 : 2500 mm: 70 mm: 70 mm: 8/11/12/16/24/36 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0011 : 292 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0012 : 292 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0151 : 217 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 3100 mmheight: 120 mmwidth: 120 mm Brand New Die Block List Price: 9.738 Euro Special Price on RequestV-Openings:- 80.0 mm / 85° / R 10.0 with guide rollers- 50.0 mm / 85° / R 5.0 with guide rollers- 35.0 mm / 85° / R 4.0- 22.0 mm / 85° / R 2.5- 2x Mounting Screws incl. Link ChainThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0007 : 217 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0039 : 180 €: 1 : 415 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0143 : 690 €: 1 : 3100 mm: 90 mm: 25 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0102 : 292 €: 1 : 835 mm: 80 mm: 25 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0147 : 890 €: 1 : 3050 mm: 105 mm: 85 mm(screwed 5x from above)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1 Bending tools with excellent value for moneyInduction hardened, with ground working surfacesStandard lengths: 835 mm, 415 mm and 835 mm (split).For tool clamping systems such as: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener and many moreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0178 : 279 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0181 : prompt, Zwischenverkauf v : 1800 €: 1 : 3100 mm: 160 mm: 45 mmmint condition86° Slightly cranked, planedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0042 : 950 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
300 € 
