하위 범주
(3 카테고리 레벨)
생산자:
(범주: 704)
스테이션은 두 개의 원통형 탱크로 구성되어 있으며 펌프 및 열교환기와 함께 고체를 용해시키는 깔때기 시스템 inchvacuuminch가있는 파이프를 통해 고정됩니다. 피클 스테이션의 용량은 1000 - 1 000 l / h입니다.
생산 능력 최대 5.000 병 / 캔 / h 0,5 L; 잠수할 수 있는 샤워 유형 자동; 경보 시스템; 유리 병, 통 및 캔; 이탈리아와 독일 부품 부품으로 갖춰진; 스테인레스 스틸로 만든;
Tipper with discharge belt and cross conveyor for the food processing industry, This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away., The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/foodeq-tvb400-4350/, Type: Tipper with discharge belt and cross conveyor, Belts: Blue food-safe ...
Asparagus peeling machine with eight stations, The Hepro Schäl-Automat HSM-180/SAP peels asparagus automatically. Spears are loaded and carried past the peeling heads, which remove the skin evenly. The machine has eight stations that can be switched on or off individually; peeled spears come out onto the side table., The rating plate shows it was built in 2008 by Hepro GmbH in Delbrück (Germany), supply 400 V, 50 Hz, 3 phase, 0.5 kW. The machine stands on castors., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/hepro-hsm-180-sap-asparagus-peeler/, Type: Asparagus peeler (Schäl-Automat), Stations: 8, each switchable, Power supply: 400 V, 50 Hz, 3 phase, 0.5 kW, Construction: Stainless steel, on castors
Optical sorter for vegetables, fruit and potato products, The Key Technology Optyx Raptor sorts with cameras: product drops past the cameras and pieces that do not meet the settings are blown out with compressed air. That takes discoloured pieces, foreign material and off-spec product out of the stream without people standing at the belt., The rating plate shows it was built in November 2007 in Walla Walla (USA), serial number 07-183087. Supply 400 V, 50 Hz, 40 A., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/key-technology-optyx-raptor-optical-sor ter/, Type: Optical sorter (camera, air ejection), Model code: 6795-604013.1, Power supply: 400 V, 50 Hz, 40 A, Construction: Stainless steel
Stainless steel mixing tank for dressings and sauces, This mixing tank has an agitator from Parema Procestechniek (type PAR5L-25, built 2006) and was used as a dressing mixer. The tank has a hinged lid and a conical bottom with outlet, and stands on legs with castors., Agitator speed is set steplessly with the dial on the control cabinet, which houses a frequency inverter., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/parema-mixing-tank-with-agitator/, Type: Mixing tank with agitator, Speed: Stepless (frequency inverter), Tank: Hinged lid, conical bottom with outlet, Construction: Stainless steel, on legs with castors
Mixing kettle that tilts for emptying, This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor., It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/tilting-mixing-kettle/, Type: Tilting mixing kettle, Lid: Pneumatically locked, Discharge: By tilting the kettle, Controls: Separate control cabinet with push buttons and emergency stop, Construction: Stainless steel
Used Urschel cutting machine, built entirely in stainless steel, This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine., The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/urschel-cutting-machine/, Type: Cutting machine, Infeed: Hopper, Drive: Electric motor with belt drive, Controls: Own control box on the machine, Construction: Stainless steel, on castors
Inclined conveyor for moving product in food processing lines, This Eillert TR-3700-400-425 is an inclined belt conveyor with a stainless steel frame and a blue plastic belt fitted with cleats. It stands on a mobile frame with adjustable feet, allowing the conveyor to be levelled and repositioned on site. The drive runs on 400V three-phase power and is fitted with its own control box with start-stop button. Eillert, based in Ulft in the Netherlands, is known as a manufacturer of processing machinery for the vegetable, fruit and potato sector., Located in Emmeloord, the Netherlands. Immediately available., More photos and full specifications: stcfoodsolutions.nl/en/machine/eillert-tr-3700-400-425/, Type: Inclined belt conveyor, Belt: Blue plastic belt with cleats, Frame: Stainless steel, mobile, adjustable feet, Power supply: 400 V, three-phase, Controls: Own control box with start-stop b ...
Inclined conveyor for moving product within a food processing line, This conveyor has a stainless steel frame mounted on castors, making it easy to reposition on the work floor. The belt has raised, wave-shaped side skirts on both sides, which keep loose or irregular products on the belt while it runs at an incline. The drive and controls are housed in a compact box fitted to the side of the frame. The open frame design allows for straightforward cleaning, suiting the conveyor for use in a food processing environment., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/opvoerband/, Type: Incline conveyor, Belt: With raised wave-shaped side skirts and cleats, Controls: Compact control box on the frame, Construction: Stainless steel frame on castors, open design
Cabbage corer on a stainless steel stand, This cabbage corer removes the hard core from a cabbage. The cabbage goes into the opening at the top, the toothed coring head comes down pneumatically and turns the core out; the removed core drops out underneath., The machine is built entirely in stainless steel and stands on four legs with adjustable feet. The pneumatics sit in a box on the side. There is no type plate, so make and year are not known. Trying it with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/pneumatic-cabbage-corer/, Type: Cabbage corer, Drive: Pneumatic, Controls: Pneumatic box with valves, Construction: Stainless steel, on legs with adjustable feet
Spin dryer for washed vegetables, This centrifuge spins washed lettuce, vegetables or herbs dry. The product goes into the removable blue basket, the lid closes and the machine spins the water out, which drains through the outlet at the side., Spin time is set with the timer switch on the base. There is no manufacturer rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vegetable-spin-dryer/, Type: Vegetable spin dryer (centrifuge), Basket: Removable plastic basket, Controls: Timer switch, Drain: Water outlet at the side, Construction: Stainless steel, hinged lid
2015 Marcelissen Sliver Remover SR2 – used, Sliver remover for sorting thin slivers from potatoes and root vegetables., This Sliver Remover SR2 was built by Marcelissen from Belfeld, a manufacturer that has supplied equipment for processing potatoes, carrots and other root vegetables for decades. The machine is designed to grade out slivers and undersized pieces from potatoes or other root vegetables using rollers that separate the thin pieces from the accepted product. It is finished in stainless steel, and the control cabinet houses components from ABB and Eaton. The unit dates from 2015 and originates from a food processing line., Located in Emmeloord, the Netherlands. Available immediately – price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marcelissen/, Machine type: Sliver remover / roller grader, Condition: Used, Application: Removing slive ...
2018 Kronen KUJ cube, strip and slice cutting machine – used, Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing., This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor., Located in Emmeloord, the Netherlands. Available immediately – price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/kronen-kuj-2/, Machine type: Cube, strip and slice cutting machine, Condition: Used, Cutting types: Cubes, strips and slices, Infeed: Inclined cleate ...
Uienpelmachine voor de professionele groenteverwerking, Deze USM-100 is een uienpelmachine van Sormac uit Venlo, gebouwd in 2006 en uitgevoerd in roestvrij staal. De machine is voorzien van een invoertrechter, een transportketting met meeneemvakken en een aandrijving van 5 kW op 230/400 V, 50 Hz. Onderin de kap zit de roterende pelkop met draaiende messen die de uien koppen, staarten en rondom insnijden, waarna lucht wordt gebruikt om de schil te verwijderen. De machine is geschikt voor een capaciteit tot 100 uien per minuut. De set is compleet met inspectie- en afvoerband met opvangbak, zoals te zien op de foto’s., More photos and full specifications: stcfoodsolutions.nl/en/machine/sormac-usm-100/
Capacity: max. 1800 kg/hr, Water inlet: 2 3/4, Water outlet: 2 x 2, Infeed height: 1360 mm, Outfeed height: 1060 mm, Power: 3 x 400V, 50Hz, 5.9kW, Dimensions: 3800 x 1000 x 2000 mm, Weight: 583 kg
Eillert flume washer,, More information soon., Have a look at the photos and videos
Kronen GEWA5000 V, Washing machine GEWA 5000V PLUS with vibration outfeed (product outfeed over vibration screen) for bigger capacities, for example approx. 600-2500 kg per hour, depending on the product., Efficient and gentle washing of lettuces, vegetables and fruit by means of adjustable water rotation.
Newtec CELOX optical sorting line, Machine has been upgraded to the newer type CELOX in 2016, The order is based on the following specifications, Ambient temperature ± 5 – 25 ºC., Product Clean, washed carrots, Capacity: 8 to 10 tons per hour, depending on the batch, (quality and sorting), Product foreign materials The Celox cannot detect foreign materials such as glass,, wood, stones etc., Functionality:, Length: +/- 3mm (less than 1% errors), Diameter: +/- 1mm (less than 1% errors), broken: 60-65% is removed (on normal broken carrots) there will be 5-6% good, carrots among the errors, C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors, Volume: +/- 5%, -Incl. conversion of complete camera unit to new version, -9 Cameras with 8 megapixel resolution (current 2 magapixel), Cameras look at the carrots from above and below at an angle, -Better detection of roo ...
Marel MS2730 Filleting Machine with Back Bone Trim, High-performance automatic salmon filleting machine, Available from August / September., This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018)., Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor., Key Features, - Automatic salmon filleting machine, - Equipped with Back Bone Trim, - High fillet yield and excellent cutting accuracy, - Automatic adjustment to varying fish sizes, - User-friendly touchscreen control, - Hygienic stainless-steel construction, - Easy access for c ...
Newtec H3013MD 13-Lane Linear Weigher with Elevating Belt – Double PCS (2013), The Newtec H3013MD is a high-capacity 13-lane linear weigher featuring an integrated elevating belt and a Triple PCS (Portion Collection System). This dual collection system enables significantly higher throughput by collecting and discharging two weighed portions simultaneously, making it an excellent solution for high-speed fresh produce packing lines., Designed specifically for products such as potatoes, onions, carrots, tomatoes, citrus fruits and other fresh produce, the H3013MD combines accurate weighing with gentle product handling and exceptional reliability. The hygienic stainless steel construction and proven Newtec technology make it a popular choice for demanding packing operations., Technical Specifications, - Manufacturer: Newtec, - Model: H3013MD, - Type: 13-lane linear weigher with elevating ...
2021 Eillert WASH-20 Double Washer – Like New, Low Hours, Premium Vegetable Washing System – Ready for Immediate Production, Offered for sale is this 2021 Eillert WASH-20 Double Washer, a premium vegetable washing system in exceptional, like-new condition. The machine has very low operating hours, has been meticulously maintained, and is ready for immediate operation., Designed for professional fresh produce processors, the WASH-20 combines high washing performance with gentle product handling, making it suitable for delicate leafy vegetables as well as heavier products requiring intensive cleaning., ---------------------------------------------------------------, Key Features, - Manufacturer: Eillert, - Model: WASH-20 Double Washer, - Year: 2021, - Condition: Like new, - Operating hours: Very low, - Double washing section for superior cleaning performance, - Stainless steel hygienic ...
Eillert G-1500 Vegetable Cutting Line – As New Condition – Only 147 Operating Hours, Available Immediately, An exceptional opportunity to acquire an Eillert G-1500 universal vegetable cutting line in genuine as-new condition. This machine has only 147 operating hours and is supplied complete with a preparation table, outfeed conveyor, and three interchangeable knife sets., The G-1500 is a highly versatile vegetable cutting machine designed for medium-capacity production environments, including fresh-cut vegetable processors, salad factories, commercial kitchens, and food manufacturing facilities. It is suitable for processing a wide range of products including lettuce, cabbage, leeks, carrots, peppers, beans, herbs, and many other vegetables., Included in this Offer, - Eillert G-1500 vegetable cutting machine, - Stainless steel preparation table, - Outfeed conveyor, - 3 interchangeab ...
Eillert MSD-500 VAR Vegetable Centrifuge, This Eillert MSD-500 VAR vegetable centrifuge is in truly as-new condition and has seen very limited use. Designed for efficient drying of washed vegetables and leafy products, the machine features a variable speed drive, user-friendly digital controls, and a hygienic stainless steel construction., Ideal for fresh-cut processors, vegetable growers, packers, and salad producers looking for a reliable and compact drying solution., Key Features, - Variable speed control (VAR version), - Stainless steel hygienic construction, - Digital control panel, - Emergency stop button, - Supplied with multiple centrifuge baskets, - Compact footprint, - Easy cleaning and maintenance, - CE marked, Suitable For, - Leafy vegetables, - Lettuce, - Spinach, - Herbs, - Fresh-cut vegetables, - Salad mixes, Condition, This machine is in excellent, near-new condition and ...
Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized |, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/hard product ...
Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized | Optional RCU810A Upgrade | Deep-Freeze Ready, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/ha ...
스테인레스 스틸 스크류 컨베이어 길이 : 15 미터. 지름 : 500mm. 구동 전기 모터, APV 밸브, 보호 커버 및 액세서리가 있습니다. 3가지 길이로 분해되었습니다.
야채용 벨트 냉각기 "CABINPLANT"에 사용되었습니다. 완두콩에 대해 작업했습니다. 전체 치수: - 총 길이 - 6.550mm; - 총 너비 - 2,320mm; - 총 높이 - 2,300mm. 기술 데이터: 벨트에 제품을 고르게 분배하는 오거: - 벨트의 작동 길이 - 6,200mm; - 벨트의 작동 폭 - 1,850mm; 6개의 제품 냉각 스프레이 섹션; 냉각 섹션에 공급되는 6 개의 펌프 - 각 펌프 - 0.55kW 모터 - 1,395U/min. 순환 펌프 - 0.55 kW - 1,395 U/min 모듈러 폴리에틸렌 벨트: - 벨트 길이 - 5,250mm; - 벨트 너비 - 465mm; 벨트 드라이브 - 속도 전달 - 모터 - 0.37kW - 1,235U/min; 반바지 탱크; 이 기계에는 CIP 세척 및 헹굼 시스템이 추가로 장착되어 있습니다. 모두 스테인레스 스틸로 만들어졌습니다.
재고 번호 U2275-2 Begerow (독일)의 스테인레스 스틸 수직 압력 필터 카트리지 유형을 사용했습니다. 모델 M4923001. 탱크의 부피 1340 l. 탱크는 최대 6 bar의 압력과 최대 140 C의 온도에 대한 작업을 위해 설계되었습니다. 재질 - 스테인레스 스틸 AISI 316L. Filtr에는 여과 카트리지를 장착하기위한 4 개의 기둥이 있습니다. 스테인레스 스틸 공급 파이프와 압력계가있는 밸브가 포함되어 있습니다. 4 개의 스테인레스 스틸 다리에 장착됩니다.
