고무 절단기 (19)

Key data: 2000 mm, 1300 mm

사용 가능한 Berstorff 바이어스 커터 각도 0-50도(수동 접합 포함) 90도(자동적인 접합포함) CE 인증 설명이 첨부되었습니다!

speed of feed:: 60 m/minfeed:: 5 - 99.999,9 mmcuts max.:: -- Schnitte/mcross-section width:: 5 - 90 mmcross-section heigth:: 5 - 90 mmCondition: Second-hand,Specification: Strip and tube cutting unit • Cutting unit: Impact blade cutting with cutting sleeves• Material diameter approx.: 5–90 mm• Conveyed by two drive belts• Distance between the belts max.: 90 mm • Belt adjustment via motor, controlled via control panel• Lower belt fixed, upper belt motor-adjustable• Belt contact length approx.: 500 mm• Contact width: 80 mm• With a maximum speed of approx.: 60 m/min• Electronic length measurement: 5 – 99,999.9 mm • Maximum cutting accuracy: +/- 2 mm• Cutting is performed by a servo motor: 1 kW• Power supply: 380/400V, 50Hz, 5kW• Material feed directio ...

새로운 지그재그 커터! 기계는 압출기 공급을 위해 800mm 배치를 무한 스트립으로 절단하도록 설계되었습니다. 12 개월 보증! 설명이 첨부되었습니다!

volt: 380 Vweight: 1,4 t: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

요청에서 코드 1049를 참조하십시오. 웹 페이지 G3 혼합 기술 - G3 STOCK 또는 LinkedIn G3 STOCK에 대한 자세한 정보 중고 기계, 보증 없이 "있는 그대로" 구매하거나 완전히 재건하여 새 기계로 보증할 수 있습니다.

speed of feed:: 50 m/minfeed:: 5 - 99.999,9 mmcuts max.:: 70 - 80 Schnitte/mcross-section width:: 40 mmcross-section heigth:: 40 mmCondition: NEW,Specification: Hose and corrugated pipe cutting machine electric cutting machine - Cutting unit: Window cut with cutting bushes - Material diameter approx.: 4 - 40 mm - Transport by two drive belts - Max. distance between the belts: 45 mm - Belt adjustment via motor, adjustment via control panel - Belt adjustment via the centre - with a maximum speed of approx.: 50 m/min - Electrical contact pressure of the drive belts - Electronic length measurement from 5 - 99,999.9 mm Digital display - Step change: 0.1 mm - Cutting via electric motor - Quantity selectable: 1 to 99,999  ...

Blackfriars 로터리 커터 / 제림기 모델 12 ASHD/267 사운드 부스 첨부

cross-section width:: Schläuche max. 11 mmcross-section heigth:: 11 mmfeed:: 0,5 - 100.000 mmCondition: used, very good conditionSpecification: universal cutting machine with roller drive for hoses - small cutting machine for hoses- feed unit: roller drive- microcontroller control: 80537- cutting unit: pneumatic- Type of cut: Blade cut- Industrial blade: for PVC hoses- Max. hose diameter: 11 mm- Maintenance unit: yes- Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length- Cutting force approx.: 500 N at 6 bar- Cutting length: 0.5 - 100,000 mm- Resolution/step change: 0.5 mm- Operating voltage: 230V, 50-60 Hz- Compressed air: 5 - 6 bar- Air consumption per stroke approx.: 0. ...

Cevenini 통나무 절단기 모델 M200 폭 1.5m x 직경 200mm. 모터 완비

cross-section width:: 800 mmcross-section heigth:: 15 mmfeed:: ab ca. 5 mmspeed of feed:: m/mincuts max.:: Schnitte/mcondition: used, overhauledSpecification: Panel cutting machine - overhauled with CE- Section width max.approx.: 800 mm- Section height max.: 15 mm, depending on the hardness of the rubber sheets- Cutting length from approx.: 5 mm (depending on material)- cutting force approx.: 10 tons - Connected load approx.: 1.8 kW- Painting: green- Operating voltage: 3 x 400V, 50Hz, N, PE- Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards,- New on-board system machine,- New control cabinet with PLC system Siemens S7-1200,- CE marking,- Instructions for use and maintenance in English or German language ...

Autogil 커터

cross-section width:: 40 (45) mmcross-section heigth:: 25 mmfeed:: 1 - 999.999,9 mmspeed of feed:: 1 - 60 m/mincuts max.:: 100 Schnitte/mCondition: used,Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles- diameter max.: 45 mm- 3 hoses or strands: 6 - 20 mm- 2 hoses or strands: 20 - 30 mm- 1 hose or string: 30 - 45 mm- cross section width max.: 40 mm- cross-section height max.: 25 mm- feed speed: 1 - 60 m/min, infinitely variable- Cutting capacity max.: 100 cuts/min depending on material and cutting length- Cutting length: 1 - 999.999,9 mm- Step jump: 0.1 mm- Feed by servo drive- Cutting by servo drive- Pulsed feed- Connected load approx.: 5 kW- Operating voltage: 3 x 400V, 50Hz, PE- Weight approx.:  ...

존 마샬 커터

cross-section width:: 700 mmcross-section heigth:: 500 mmfeed:: -- mmCondition: used, overhauledSpecification: splitter for rubber bales - overhauled with CE- cross section width max.ca.: 700 mm- cross section height max. approx.: 500 mm- cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz- Infeed roller conveyor for product transport- Machine stands on a raised pedestal- Two-hand safety control for driving the blade movement- Safety guard according to current standards- New control cabinet- New on-board system machine- Operating and maintenance manual in English- CE marking- Paintwork: according to customer requirements- Refurbished with 1 year warranty- CE marking,Option:- Output roller conveyor newThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

머클 슬리 터 500mm 너비

횡단면 폭:: 100 mm 단면적 높이:: 40 mm 절단 길이:: 2 - 999,999.9 mm 조건: 새로운, 사양: 호스 및 프로파일용 충격 나이프 절단기 CC-600/40- 접촉 길이: 600 mm- 제품 직경: 40 mm- 대역폭: 100 mm- 트랙티브 힘: 400 N ~ 800 N- 드라이브: 2 드라이브 상하 벨트 - 컨베이어 벨트 속도 : 100m / min- 드라이브 피드, 절단 모터 : 서보 드라이브 - 블레이드 최대 절삭력 : 4,000 1 / min- 연결 부하 : 3.5kW- 치수 L / H / W : 1,900 x 1,650 x 960 mm- 무게 약 : 580 kg데이터 f & uuml,이 광고는 ModulMWS - LogoTech oHG의 기계 관리로 만들어졌습니다.

cross-section width:: -- mmcross-section heigth:: -- mmfeed:: -- mmspeed of feed:: 0,4 - 20 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 85 mmcross-section heigth:: 25 - 40 mmfeed:: 1 - 999,999,9 mmspeed of feed:: 60 m/mincuts max.:: 100 - 120 Schnitte/mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 5 Schläuche 3-5 mmcross-section heigth:: 3 - 20 mmfeed:: 1,5 - 50 mmCondition: used, very good condition only approx. 1 year in productionSpecification: circular knife cutting machine for slices and rings- small cutting machine with high-speed rotating circular knife- feed and knife movement, pneumatic- Tube or strand diameter min.: 3 mm- Tube or strand diameter min.: 20 mm- Feed (ring or strand length): 1.5 - 50 mm- Output depending on material max.: 60 strokes/min- Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm- Power requir ...