프레스 사용 판매를 위해 (320)

2 heated plates, table size 1300 x 2500 mm Auction-ID: A7-46472-11

Defects: air leakage (upper frame); incomplete cycle; oil leakage on hydraulic cylinders; machine not operated for ~6 years; further faults possible; sold for repair/parts Auction-ID: A7-40553-25

Auction-ID: A1-45502-5

Still in operation, a maximum of 10 operating hours can be added Here is the compact overview of the most important technical data for the mütek MPP 80: FeatureSpecificationThroughputup to 80 kg/h (depending on material) Briquette diameter80 mm (standard) Engine power5.5 kW (hydraulic drive) Silo volumeapprox. 1.0 m³ (standard with agitator) Material moisturemax. 18 % Atro Material size< 20 mm (granules/chips) Dimensions (LxWxH)approx. 1,850 x 1,450 x 1,450 mm Weightapprox. 850 kg Power connection 400 V / 50 Hz / 3 phases Special feature: The machine has an oil shortage switch as standard to protect the hydraulic pump when the oil level is too low. Auction-ID: A1-46501-519

Auction-ID: A3-43525-5100

According to photos, without tools, weight estimated Auction-ID: A1-45666-2

용량: 250톤 V ? 링 명목 힘: 30 - 125톤 카운터 램 명목 힘: 30 - 125톤 램 스트로크: 67 mm 테이블 표면적: 560 x 600 mm 슬라이드 면적: 560 x 560 스트로크 수: 80 s.p.m. 기계 무게 약 14,000 kg

According to photos, without tools in the press, these are still being removed, machine is running and is on power Auction-ID: A1-45666-1

According to photos, machine is no longer connected to the power and the liquids are emptied for transport. Documents are available electronically Auction-ID: A1-45666-5

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-52

Stamp size 4x 120x150cm. Press height 88cm. Includes scissor lift table movable with rails dimensions lxw approximately 141x103.5cm extendable to 300cm, height adjustable rear output roller conveyor dimensions lxw approximately 480x180cm, 2 parts 2-way pneumatic roller conveyor dimensions total lxbxh 500x103x92cm. The required surface area is approximately 600x570cm. Includes air and power reel. Auction-ID: A1-41994-5

판 크기: 2200 x 1100 mm주간 개구부: 350 mm일조 수: 1 St. 난방: elektrisch 비압: kg/cm² 총 압력: 65 to 모터 출력: 1.1 kD 측정 (L/W/H): 2540 x 1280 x 1900 mm 기계 무게 약 2500 kg연도: 연도: 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

work piece width: max ~ 100 mmworkpiece height: max ~ 100 mmcycle time: 4 secMitre jointing machine Himmel type HF120 for precise and firm gluing of mitre joints in wooden frames, glazing bars and battens with white glue. The machine enables a fast setting time thanks to high-frequency technology, pneumatic pressing mechanisms and exact alignment of the workpieces. Ideal for furniture and picture frame construction.The glue must be applied manually as the machine does not have a glue container.Operation: Foot switchPossible angles: 90°, 120°, 135°Machine without functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

프레스 압력: 최대 104 가공 길이: 3.090 mm작업 폭: 4 x 240 mm베니어 몰딩, 목재 접착 또는 기타 프레스 작업에 사용되는 견고한 유압 성형 또는 빔 프레스 Wemhöner 타입 VS 4 S. 프레스는 독립적으로 조절 가능한 4개의 프레스 면을 갖추고 있습니다. 분해 및 적재 포함. 고정 적재 날짜: 2026년 6월 15일. 접착제 스프레더도 제공됩니다. 이 광고 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

작업 폭: 350 mm 작업 길이: 5.100 mm 속공: 210 mm 목재, 빔 또는 기타 프레스 작업에 사용되는 고체 유압 빔 프레스 Bürkle 타입 HS 1/90 35/510. 기능이 없는 가열판. 새 것과 동일한 교체용 실린더도 포함. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

작업 폭: 750 mm 작업 길이: 3.000 mm 길이: ~ 3.850 mm 너비: ~1.000 mm 높이: ~ 2,000 mm 유압 베니어 프레스 Ott 타입 300 K75, 베니어, 목재, 빔 또는 기타 프레스 작업에 사용됩니다. 기능 없는 가열판. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

Heavy series pellet mill, 380 volt power supply, hourly output 100 kg, never used Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-45833-317

Heavy series pellet mill, 380 volt power supply, hourly output 100 kg, never used Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-45833-198

길이: 2.800 mm, 폭: 600 mm, 높이: 1.800 mm, 프레스 실린더 수: 6 Stk.work 최대 높이: 약 1,000 mm, 프레스 실린더의 유연한 배치를 위한 천공판이 있는 솔리드 공압 접착 프레스. 압력 슈 없는 실린더 1개. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 제작되었습니다.

폭: 3.000 mm, 높이: 1.900 mm, 길이: 800 mm공압 접합 프레스 FEDERHENN MASCHINEN 타입 99.98, 무덤 십자가 최종 조립 장비. 프레스는 모듈식 및 이동식 설계로 다양한 프레스 작업에 맞게 변환할 수 있습니다. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 제작되었습니다.

Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 11,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1400x2450x2800 mmTotal pressure: 400 toweight of the machine ca.: 12000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2950x1550x2950 mmWeight: 4000 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2960x1500x2000 mmWeight: 4000 kgTotal power requirement: 19,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3940x1620x2130 mmWeight: 5760 kgTotal power requirement: 32,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2250 mmWeight: 7900 kgTotal power requirement: 54 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3050x760x2100 mmWeight: 400 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.