프레스 사용 판매를 위해 (1,783)

제어 PLC 지멘스 S7 슬라이드 총 힘(명목상): 630 totool 치수 하부 테이블(좌우): 900 mm 하부 테이블(앞뒤): 900 mm 닫힌 높이 최대 900 mm

CONTROLS  conventional PRESS FORCES  total force (nominal): 75 toPRESS TABLE  table surface (left-right): 1250 mm  table surface (front-back): 1110 mmSLIDE  table surface (left-right): 960 mm  table surface (front-back): 750 mmSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke adjustment: yes   stroke min.: 10 mm  stroke max.: 50 mm  stroke rate (min.): 120 /min  stroke rate (max.): 600 /minSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 300 mmELECTRICAL SPECIFICATIONS  total power consumption: 15.5 kWDIMENSIONS / WEIGHTS  total weight approx.: 13500 kgATTACHMENTS (PRESSES)  strip feeder: yes   feeder type: roll feeder

PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 950 mm  table surface (front-back): 660 mm  thickness of bolster plate: 68 mmSLIDE  table surface (left-right): 540 mm  table surface (front-back): 450 mm  spigot hole diameter: 60 mm  stroke: 130 mm  stroke rate (max.): 65 /minSLIDE (MECHAN. PRESS)  slide adjustment: 100 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 370 mmDIMENSIONS / WEIGHTS  total weight approx.: 7000 kgLocated in Barcelona - Spain2 identical units available

CONTROLS  electronic controls SCHMIDT PRESS FORCES  total force (nominal): 0.25 toPRESS TABLE  table surface (left-right): 180 mm  table surface (front-back): 150 mmSLIDE  slide force: 0.25 to  stroke: 100 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 35 kgThis is an assembly press with force-displacement monitoring.• Operating hours: approx. 150• Condition: very good, almost like new• Features: Press force monitoring, two-hand operation• Stroke: 100 mm• Tool dimensions: 150 x 100 mm• Press force: 0.25 tons

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 55 toPRESS TABLE  table surface (left-right): 750 mm  table surface (front-back): 450 mmSLIDE  table surface (left-right): 400 mm  table surface (front-back): 300 mm  spigot hole diameter: 45 mm  stroke: 50 mm  stroke rate (max.): 100 /minSLIDE (MECHAN. PRESS)  slide adjustment: 70 mm  stroke min.: 6 mm  stroke max.: 50 mm  stroke rate (min.): 50 /min  stroke rate (max.): 100 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 310 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1200 mm  space requirements -front/back-: 1500 mm  total height: 2500 mm  total weight approx.: 3850 kgATTACHMENTS (PRESSES)  strip feeder: optional   feeder type: grip feeder   saf ...

CONTROLS  PLC SCHNEIDER PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 11   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 66 toSLIDE  slide force: 6 to  stroke: 114 mmSLIDE (MECHAN. PRESS)  variable speed: yes   stroke rate (min.): 40 /min  stroke rate (max.): 130 /min  main drive power: 7.5 kWSTRIP-FEEDER  feeder type: roll feeder TRANSFER SYSTEM  distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2875 mm  space requirements -front/back-: 1500 mm  total height: 2900 mm  total weight approx.: 7500 kgATTACHMENTS (PRESSES)  safety guard / safety door: yes   2-hand engagement: yes   noise protection cabin: yes   acc. to actual accident protection regulation: yes Specifications:Number of stations: 12 (11+1)Capacity per ram: 6 tonsMaximum str ...

CONTROLS  PC controller BECKHOFF PRESS DESIGN  number of slide actions: 13 SLIDE  slide force: 3 to  stroke: 60 mm  stroke rate (max.): 210 /minSLIDE (MECHAN. PRESS)  slide adjustment: 6 mm  variable speed: yes   stroke rate (min.): 70 /min  stroke rate (max.): 210 /min  main drive power: 4 kWDIMENSIONS / WEIGHTS  space requirements -left/right-: 2300 mm  space requirements -front/back-: 1000 mm  total height: 1900 mm  total weight approx.: 4000 kg

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes   opening in table: yes PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 710 mm  table surface (front-back): 560 mmSLIDE  slide force: 100 to  table surface (left-right): 560 mm  table surface (front-back): 450 mm  spigot hole diameter: 50 mm  stroke: 320 mm  thickness of bolster plate: 150 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 340 mm/s  working velocity max.: 32 mm/s  return velocity max.: 330 mm/sSLIDE EJECTOR / CUSHION  nominal force: 2 to  stroke: 40 mmDIE CUSHION (TABLE CUSHION)  cushion force: 10 to  stroke: 80 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 455 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 300 mm  sheet thickness max.: 20 mm  spee ...

CONTROLS  PC controller BECKHOFF Offer for servicesof complete Overhaul of a Customer-Owned Fineblanking Press FEINTOOL GKP 160Scope of Overhaul• Complete disassembly into individual components• Inspection of all parts, including crack testing of critical components• Overhaul of the drive system, new motors• Reworking and precise alignment of all guideways• Complete overhaul of the hydraulic cylinders• Overhaul of the clamping tables• Installation of a new hydraulic unit• Renewal of the pneumatic system• Renewal of the electrical systemModernisation / Retrofit• Combined table• Servo feed systems• Central lubrication system• RAZIOL band lubrication• New brake/clutch unit• BECKHOFF PC-based control system with touch panel• PILZ safety control system• Implementation of CE conformityNotes• Special options and customer-specific extensions can be integrate ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 50 toPRESS TABLE  table surface (left-right): 700 mm  table surface (front-back): 450 mmSLIDE  table surface (left-right): 440 mm  table surface (front-back): 360 mm  spigot hole diameter: 40 mm  stroke: 90 mm  stroke rate (max.): 70 /minSLIDE (MECHAN. PRESS)  slide adjustment: 70 mm  stroke min.: 0 mm  stroke max.: 90 mm  main drive power: 3 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 300 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 700 mm  space requirements -front/back-: 1295 mm  total height: 2360 mm  total weight approx.: 3000 kg

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 45 toPRESS TABLE  table surface (left-right): 700 mm  table surface (front-back): 440 mm  opening in bed (diameter): 40 mmSLIDE  table surface (left-right): 410 mm  table surface (front-back): 280 mm  stroke rate (max.): 110 /minSLIDE (MECHAN. PRESS)  slide adjustment: 65 mm  stroke min.: 0 mm  stroke max.: 90 mm  main drive power: 5.5 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 380 mm  distance between columns (H-frame): 360 mmATTACHMENTS (PRESSES)  2-hand engagement: yes   foot engagement: yes   European CE standards: yes

CONTROLS  conventional PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 100 toSLIDE  slide force: 100 to  stroke rate (max.): 72 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 112 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 407 mmATTACHMENTS (PRESSES)  2-hand engagement: yes for safe tools only

CONTROLS  PLC SIEMENS S7 300 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 2600 mm  table surface (front-back): 2000 mm  height above floor level: 540 mmSLIDE  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 460 mm/s  working velocity min.: 25 mm/s  working velocity max.: 44 mm/s  return velocity max.: 460 mm/sTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1700 mmELECTRICAL SPECIFICATIONS  total power consumption: 180 kWDIMENSIONS / WEIGHTS  total weight approx.: 95000 kgATTACHMENTS (PRESSES)  press automation: yes   gripper transfer system: yes   acc. to actual accident protection regulation: yes   European CE standards: yes Complete hot forming line consisting of: Hydraulic press NEFF 800 to. Ruhstrat furnace system:- Natural gas heat ...

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: link drive   feedstock transport direction: left to right SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 22 to  stroke: 8 mmV-RING  nominal force: 25 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 220 mm  ram adjustment: 80 mm  distance between columns (H-frame): 450 mm  passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 180 mm  sheet thickness max.: 5 mm  feed velocity max.: 999 m/minSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 180 mm  sheet thickness max.: 5 mm  feeding step max.: 999 mm  sheet length min: 1350 mm ...

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: knuckle-joint SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 15 mmV-RING  nominal force: 75 to  stroke: 13 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mm  distance between columns (H-frame): 560 mm  passline opening (free passage in side columns): 270 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 250 mm  sheet thickness max.: 10 mm  feeding step max.: 999.99 mm  sheet length min: 1900 mm  pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into individual parts findings of all com ...

최대 압력(kg): 6000

사양 제조 업체: 오토 슈뢰더 스트로크 : 손으로 조정할 수있는 160mm 스탠드 사이의 거리 : 800mm 통로 : 250mm 지원 테이블: 800mm, 4개의 강저 부분 원형 400mm 강저 차원 25x75mm와 더불어 구멍: 테이블 센터 70mm 테이블 높이 : 835mm 크기 : LxWxH 110x900x2200mm

기계는 기술적으로 양호하며; 사전 예약을 통해 시험할 수 있습니다.

Key data: 500 t

제조사: 부허-가이어 모델: AEBI 500 연도: 1969 상태: 중고 재고 번호: 9455 제어 시스템: SIMATIC S 5 (CPUS 115) 압축력: 500 t 피스톤 직경: 525 mm 피스톤 로드 직경: 498 mm 스트로크 길이: 412 mm 기계 중량: 18000 kg 인쇄기는 1992년에 전면적인 개보수(유압 및 제어 시스템)를 받았습니다. 장비: 기술 문서 유압 동력 장치 스위치 기어

Key data: 800 t

제조사: 디펜바허 모델 번호: PHP 800 연도: 2008 상태: 중고 재고 번호: 9354 압축력: 800 t 테이블 길이: 2000 mm 테이블 폭: 1500 mm 스트로크: 1250 mm 기계 중량: 44000 kg 2021년에는 소규모 현대화(완전히 새로운 제어 장치와 안전 기능)가 이루어졌습니다.

입문 번호: 9233 유형: LUD 500/2500-F1 프로듀서: ZDAS 창설: 1975년 조건: 압축력: 500 t 최대 스트로크 속도 상위권: 20 1/분 램 스트로크: 315 mm 주 모터 출력: 55 kW

Key data: 200 t, 80 mm

입문 번호: 9036 종류: 200 T 프로듀서: 로스 창설: 2003년 조건: 제어 시스템: DIMECO MCU 24 압축력: 200 t 테이블 길이: 2100 mm 테이블 폭: 1000 mm 스트로크: 80 mm 램 조정: 150mm 기계 중량: 36700 kg

이 HIDROLIKSAN PH4C 200T 유압 프레스는 2015년에 제조되었습니다. 200톤의 강력한 프레스 파워와 1800x1400mm 크기의 대형 테이블을 갖추고 있어 다양한 프레스 작업에 적합합니다. 이 HIDROLIKSAN PH4C 200T 유압 프레스를 구매할 기회를 고려해 보세요. 자세한 정보는 저희에게 문의해 주세요.

이 상기아코모 T.450 RCE 굽힘 기계는 2018년 이탈리아에서 제조되었으며 7062시간의 생산 시간을 자랑합니다. 이 장치는 지멘스 시마틱 HMI 제어 장치를 갖추고 있습니다. 이 기계는 4500 kN의 압착력을 가지며, 상태가 매우 우수하고 운영 시간이 짧습니다.

Inv. Num. : 948 유형: LVH 2500 프로듀서: ŽĎAS 제작: 1961년 매개 변수: 깊이: 1800mm 너비: 3450mm 지상 높이: 4650mm 무게: 85,000 kg 전압: 220 / 380V 주전원 주파수: 50Hz 인력: 2500 t 스트로크 수: 20/분 리프트 높이: 500mm 테이블에서 최소 플런저 거리: 900mm 테이블에서 최대 플런저 거리: 1400mm 테이블 표면: 1050 x 1400mm 플런저 면적: 1050 x 1200mm

Inv. Num. : 946 유형: LKO 315 생산자: ŠMERAL 제작: 1956년 매개 변수: 길이: 3600mm 너비: 1750mm 높이: 4600mm 플런저 스트로크: 180mm 스트로크 수: 60/분 무게: 17,000 kg 전력 요구 사항: 25kW 전압: 380V 주파수: 50Hz

Inv. Num. : 8718 유형: LDC 250 생산자: SMERAL 제작: 1987 매개 변수: 압축력: 245 t 최대 스트로크 속도 상부 테이블: 38 1/min 램 조정: 120mm 램 스트로크: 200mm 기계 중량: 29800kg

Key data: 250 t

Inv. Num. : 8652 유형: ZHS 250 생산자: ŽDB Hydraulika 생성: 2000 매개 변수: 압축력: 250 t 테이블 길이: 3500mm 테이블 폭: 1200mm 스트로크: 700mm 램 치수: 3500 x 1200mm 작동 속도: 13-60mm/s 기계 높이: 6000mm 기계 길이: 3000mm 기계 폭: 5000mm 기계 중량 : 60000 kg

인베스트 번호 : 8630 유형: EHP 50 프로듀서: 달리 제작: 1997 매개 변수: 제어 시스템: DELEM 압축력: 50t 최대 굽힘 길이: 2000mm 기계 중량: 2600kg

Inv. Num. : 8585 유형: KPRW 160 프로듀서: 키저링 제작: 1972년 매개 변수: 압축력: 160 t