하위 범주
(3 카테고리 레벨)
생산자:
(범주: 201)
saw blade diameter: 420 x Ø 40 mmcutting diameter: 170 mmcutting length: 410 mmdimensions of saw-blade: 420x3,2/2,4x40 mmturning speeds: 3500 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 120 kgdimensions of the machine ca.: 1300 x 800 x 1600 mm- Cross-cut and miter saws for cross-cut cuts- Miter adjustment on both sides (60 ° / 45 °), with fixed stop- Shifter cut on both sides 45 °, with fixed stop- Stable cast iron construction- Precise linear bushing guide on the tool slide hardened and ground steel shafts- manual saw feed- Saw blade infinitely adjustable in height- nozzle for opt. SuctionCutting data:- Cutting length at 90 ° = 410 mm- Cutting height at 90 ° = 170 mm- Cutting length at 45 ° = 290 mm- Cutting height at 45 ° = 115 mm Special accessories included:- Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 ° ...
cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSpeed: 2.800 U/min.Required air-pressure: 6-8 barWorking height: 900 +/- 20 mmDimensions (L/W/H): 10645x1000x1300 mmSALVAMAC COMBO 500 – The semi-automatic miter sawwith SALVASTOP 100 - electronic length stop/slider-------------------------------------------------- -Pos. 1: Legend 500 under table miter saw-------------------------------------------------- -Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.When cutting boards that are on top of each other, h max. 100 mm.The structure is made entirely of thick-walled and reinforced full-surfacepainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cut control in ergonomic position.Motor power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for ...
cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw-------------------------------------------------- -----------Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm.When sawing stacked boards h max. 100 mm.The structure is made entirely of thick-walled and reinforced throughoutpainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cutting control in ergonomic position.Engine power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for weight balance and longevity. Shock absorbing system.Independent pneumatic adjustment options to adapt to differentTypes of processing.Durable and easily replaceable saw blade adjustment bar.HM circular saw blade, diameter 500 mm, Z=108.Pneumatic upp ...
With 4x air infeed table size each 1800x600mm, outfeed roller table dimensions approximately 7500x5000mm, switch cabinet and safety fence. Used floor space approximately 9500x7400mm Auction-ID: A1-48377-11
2x Stand Alone SawsComprising:Lurem tabler circular sawVertical band saw Auction-ID: A1-48805-220
Cutting length: 4,300 mm Control: Power Control Scoring saw: 2.2 kW Cutting depth: 2,200 mm Software: CADmatic 4.0 Saw blade guard: 95 mm Collets: 7 pieces Main saw blade: 350 mm Scoring saw blade: 180 mm Air table: 4 Saw carriage speed forward: 1 - 150 m/min Saw carriage feed return: 150 m/min Program slider feed flow: 90 (EU max. 25) Program slide feed return: 90 m/min Main motor: 13.5 kW equipment: Central angle pressure device Label printer integrated into print bars Completely gloomy machine table Automatic pressure beam height control Automatic cutting height Adjustable contact pressure pressure beam (soft-touch package) Adjustable Contact Pressure Collets (Soft-Touch Package) 5 to. Lift table 1 Power-Concept collet (can be positioned independently of the program slider) Speed Package Groove program Label printer PICA 108 Auction-ID: A7-32339-3
cutting diameter: 330 mmsaw band length: 4115 mmcutting width: 0,9 mmmain drive motor: 3,7 kWRoller conveyor length: 5000 mmRoller conveyor width: 700 mmroll diameter - bore: 150 mmtotal power requirement: 13 KVAweight of the machine ca.: 1,8 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ...
cutting diameter: 400 mmsaw band length: 4715 mmcutting width: 1,3 mmmain drive motor: 7,5 kWRoller conveyor length: 4000 mmRoller conveyor width: 700 mmroll diameter - bore: 150 mmtotal power requirement: 14 KVAweight of the machine ca.: 7,5 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ...
cutting diameter: 400 mmsaw band length: 4715 mmcutting width: 1,3 mmmain drive motor: 7,5 kWRoller conveyor length: 4000 mmRoller conveyor width: 700 mmroll diameter - bore: 150 mmtotal power requirement: 14 KVAweight of the machine ca.: 7,5 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ...
사용
cutting diameter: 1000 mmsaw band length: . mmcutting width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 1300 mmsaw band length: 11880 mmcutting width: 1,6 mmmain drive motor: 11 kWtable surface area: 2500x1300 mmcutting range: 1300x1300 mmtotal power requirement: 16 KVAweight of the machine ca.: 17,75 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software s ...
cutting diameter: 1300 mmsaw band length: 11880 mmcutting width: 1,6 mmmain drive motor: 11 kWtable surface area: 2300x1200 mmcutting range: 1300x1300 mmtotal power requirement: 16 KVAweight of the machine ca.: 17,75 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software s ...
cutting diameter: 1000 mmsaw band length: . mmcutting width: . mmmain drive motor: . kWcutting range: 1000x1000 mmtotal power requirement: . KVAweight of the machine ca.: . tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 1000 mmsaw band length: . mmcutting width: . mmmain drive motor: . kWcutting range: 1000x1000 mmtotal power requirement: . KVAweight of the machine ca.: . tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
사용
Sawblade tiltable: . °cutting width: . mmMotor output: . kWThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 800 mmsaw band length: . mmcutting width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 530 mmsaw band length: 6670 mmcutting width: 530 mmControl: CNC main drive motor: 7,5 kWroll guideway: optional total power requirement: 13 kWweight of the machine ca.: 6,3 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 330 mmsaw band length: 4115 mmcutting width: 0,9 mmmain drive motor: 3,7 kWRoller conveyor length: 5000 mmRoller conveyor width: 700 mmroll diameter - bore: 150 mmtotal power requirement: 13 KVAweight of the machine ca.: 1,8 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ...
saw blade diameter: 225 mmcutting diameter: max. 60 mmfeed: max. 600 mmtotal power requirement: 5 kWweight of the machine ca.: 1,03 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmheight of material-table: 600 mmPitch min/max: 50.000 mmvice: 335 mm Öffnungband speed: 15 - 100 m/minautomatic feeds: 600 mmdimensions of saw-band: 3650 x 27 x 0,9 mmControl: MEP CNC total power requirement: 2.2 kWweight: 1.105 kgrange L-W-H: 3,3 x 2,83 x 2,23 melectro-hydraulic band saw fully automatic, with additional : semi-automatic semi-automatic-dynamic manual .. operationDescription:- robust electro-hydraulic band saw fully automatic (INDUSTRY) MEP - WINDOWS numerical control unit User interface with 7” touch screen display mechanical buttons for the sawing machine’s operating functions guarantees reliable operation, simple and i ...
Scoring unit: - kWDimensions (L/W/H): mmmachine weight ab.: 900 kgRear feed width: mmCutting length: 5300 mmMotor output: 4,6 kWCutting height: 2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sawblade tiltable: 0-45° °Length of the rolling table: 3.000 mmcutting width: 1.100 mmMotor output: 5,5 kWCutting height: 170 mmCutting height at 45°: mmSaw blade diameter: 250 - 500 mmSpeed: 2.800/4.000/5.500 U/min.weight of the machine ca.: 1.950 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting length: 4.300 mmCutting height: 1.800 mmMotor output: kWScoring unit: - kWDimensions (L/W/H): mmmachine weight ab.: ca. 600 kg kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
롤 직경: 400 mm 길이: 400 mm 작업물 높이: mm 테이블 크기: 610 x 500 mmsaw 밴드 길이: 2780 - 2980 mm 회전 속도: 22 - 147 m/최소 총 전력 요구: kW 기계 무게 약 0.4 기계 크기: 0.6 x 0.8 x 1.9 m. 밴드쏘는 - 이상적인 용접 장치 - 연삭 장치 - 기계 조명 이 광고 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.
2.600 € 
