톱 사용 판매를 위해 (1,067)

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alucross-cut and mitre saw with maximum cutting height of 200mmstable grey cast iron constructionprecise ball bearing guide of the tool slide on hardened and ground steel shaftsmanual saw feedfast mitre adjustment up to 25° horizontal and 30° verticalreadjustable fixed stops at 90° and 45°lower saw blade protection can be connected to extraction systemmachine mounted on mobile machine base with 1.5 m long roller conveyors left and rightleft side with scale and stop slide

Panel sizing and solid wood saw manufactured in 1999. This PANHANS 693 / EURO 5 features a maximum cutting width of 4200 mm and is equipped with an air cushion table for enhanced efficiency. The machine includes a main saw, scoring saw, and automatic feed system. If you are looking to get high-quality panel cutting capabilities, consider the PANHANS 693 / EURO 5 machine we have for sale. Contact us for further details.

A Strebig vertical panel saw is available. Horizontal/vertical cutting length: 4200mm/2200mm, max. cutting depth: 80mm, saw blade diameter: 300mm, saw blade bore: 30mm, speed: 4750rpm, machine dimensions X/Y/Z: approx. 5200mm/1200mm/2700mm, weight: approx. 800kg. An on-site inspection is possible.

: 15282 90 band length: 4600 - max. 4750 mm: Fabr. Ideal weight: ca. 890 kgdimensions of the machine ca.: 130 x 850 x 2300 mmPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

원형톱 테이블 쏘 원형 톱 절단 높이 280mm 톱날 직경 750mm 모터 출력 7 kW V-벨트 구동 3개 V-벨트 테이블 크기 1250 mm x 940 mm 테이블 위의 슬라이딩 스톱 스톱 길이 1200 mm x 높이 125 mm 톱날 오른쪽 절단 폭 최대 550mm 추출 연결 직경 120mm 팔레트 기준 무게 340kg 치수 1600 mm x 1100 mm x 높이 1350 mm 하중 치수 1400mm x 1100mm x 높이 1600mm

1985년에 양호하게 제작된 이중 횡단식 퓐호르스트, 2026년 5월까지 사용 적재 치수 3900mm, 너비 1000mm, 높이 800mm 스테이프 1920mm부터 말뚝 길이 단축 길이 2500mm 전동기 길이 조절 마이터 커팅 시설 위치별 가격

Key data: 45 °, 2600 mm, 1350 mm

슬라이딩 테이블 톱 VEMA 유형 FBKS 기계 번호. 1367 1994년에 건조됨 톱날 회전 45° 슬라이딩 캐리지 길이 2600 mm 모터 출력 7.5 kW 득점 없음 톱날 오른쪽 절단 폭 1350mm 테이블 확장 및 테이블 확장 좁은 후드와 넓은 추출 후드 추출 연결 직경 120mm 속도는 4000, 5000, 6500rpm, 벨트로 조절 가능 톱날 직경 최대 450mm 최대 절단 높이 155mm 팔레트 포함 중량 980kg 치수 2850 mm x 3500 mm x 높이 1400 mm 하중 치수 2850 mm x 2000 mm x 높이 1600 mm

Key data: 500 mm, 180 mm

언더테이블 크로스컷 톱 절단 폭 약 500mm 절단 높이 약 120mm 아래에서 앞에서 뒤로 연속된 교차 절단 움직임 캡핑은 풋 스위치에 의해 트리거됩니다 모터 약 3 kW 톱날의 직경 500mm, 톱날은 HM-팁입니다 톱 본체 흡입 연결부, 뒤쪽 아래쪽 디암. 100mm 각 측면 롤러 컨베이어는 길이 3000mm, 롤러 길이는 500mm입니다. 롤 직경 80 mm, 롤 간격 중심에서 중심까지 205 mm 두 개의 슬라이딩 길이 스톱을 가진 롤러 컨베이어 1개 외부 치수: L 6800 mm x W 950 mm x H 1300 mm

Three-function combined table circular saw, slotted hole drilling and milling machine by Kirchner, Leipzig. Without milling arbor. Technical data: Motor: 3 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 1.5 kW Power supply: 220 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 2.2 kW Connection: 16 A / 400 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Motor: 0.55 kW / 220 V Cutting height: approx. 50 mm Cutting depth: approx. 80 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium

Pfeiffer Piccolo pendulum saw with a sturdy roller feed system for cutting boards and beams. The machine is fitted with a pneumatic saw feed mechanism with a safe two-hand operation system. Video available on request. Technical data: Cutting height: max. approx. 120 mm Cutting width: max. approx. 600 mm Roller table: 250+360 cm Feed: Pneumatic Condition: Gebraucht Location: Tauberbischofsheim, Germany

Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: Cutting length: approx. 2,200 mm Mitre angle: 45° – 90° Workpiece: max. 50 × 70 mm Further details: See PDF Condition: Gebraucht Location: Tauberbischofsheim, Germany

Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: Cutting length: max. 380 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Cutting height: max. 120 mm Feed length: max. 5,500 mm Cutting width: max. 700 mm Saw blade diameter: max. 700 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: Motors: 2 Length: approx. 320 cm Width: approx. 140 cm Height: approx. 160 cm Table: swivelling Technical details: on request Condition: Gebraucht Location: Tauberbischofsheim, Germany

Sturdy Pehaka band saw for cutting timber and other materials. Technical data: Roller diameter: 800 mm Motor: 3 kW Clearance height: max. approx. 350 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Motor: 1.5 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Condition: Gebraucht Location: Tauberbischofsheim, Germany