톱 사용 판매를 위해 (1,295)

cutting diameter: 225 mmsaw band length: 2480 mmcutting width: 250 mmcutting speed: 45 / 90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mmcapacity 45 degrees: flat: 135 x 185 - 145 x 150 mmcapacity 45 degrees: round: 150 mmcapacity 45 degrees: square: 145 mmcapacity 60 degrees: flat: 63 x 107 - 69 x 90 mmcapacity 60 degrees: round: 70 mmcapacity 60 degrees: square: 70 mmcapacity 90 degrees: flat: 240 x 160 - 250 x 110 mmcapacity 90 degrees: round: 225 mmcapacity 90 degrees: square: 185 mmtotal power requirement: 0,75 / 1,1 kWweight of the machine ca.: 200 kgdimensions of the machine ca.: 1385 x 580 x 890 mmTechnical features:- Hydraulic head descent control system- End stop at the end of the cut- Powerful three-phase induction motor with 2 speeds andTransmission with oil bath- Saw frame, vice and swivel group made of cast steel- Steel blade guide with ball bearings- Vice with quick clam ...

cutting diameter: 320 mmsaw band length: 4670 mmcutting width: 580 mmtotal power requirement: 7,4 kWweight of the machine ca.: 3 tSawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mmLength of cut, min./max. 0 - 580 mmDistance from column to saw band, max. 690 mmCutting speed, infinitely variable 16 - 160 m/minDimensions of saw band, length x Ø approx. 4,670 x 38 mmLength of remaining pieces, automatic/single cut 100/10 mmSaw blade drive, approx. 4.4 kWTotal electrical load, approx. 7.4 kW - 380 V - 50 HzWeight, approx. 3,000 kgAccessories / Special Features: Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. Infinitely variable settings of sawing feed with display of the current cutting speed. Workpiece counter: Number of workpieces can be preset. Selection sw ...

cutting diameter: 235 mmdimensions of saw-band: 2645 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 0 - 90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 230 Volttotal power requirement: 1,5 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble-miter band saw- Variable speed control- Miter cuts up to 60° left and 45° right- Vise with quick-clamping mechanism- Blade tension monitoring- Automatic electric cooling systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

톱날 직경: 300 mm 절단 직경: 100 mm 톱날 회전 속도: 40 / 80 U/최소 용량 90도: 사각형: 90mm 용량 90도: 원형: 100mm 총 전력 필요량: 1.5kW 기계 무게 약 0.5 t냉간 원형톱 - 45도 각도 각도 절단(일면) - 재료 정지 최대 1170 mm - 냉각수 펌프 이 광고 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

톱날 직경: 370 mm용량 90도: 둥근 120mm 용량 90도: 정사각형: 100 mm: 180 x 100 mm 작업 높이: 925 mm톱날 회전 속도: 17 - 70 U/최소 총 전력 요구량: 3.0 kW 기계 무게 약 1.8 x 1.1 x 2.0 m 자동 냉원형 톱 - CNC 제어, 마이크로 윤활 시스템 이 광고 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

cutting diameter: 360 mmsaw band length: 6.300 mmcutting width: 700 mmtable height: 800 mmtotal power requirement: 14 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: mAutomatic Horizontal Band SawCutting Capacity at 90° (Round): Ø 360 mmCutting Capacity at 90° (Rectangular): 700 x 340 mmCutting Capacity at 75° Mitre (Left & Right):Ø 340 mm / 650 x 340 mmCutting Capacity at 60° Mitre (Left & Right):Ø 340 mm / 600 x 340 mmCutting Capacity at 45° Mitre (Left & Right):Ø 340 mm / 400 x 340 mmMaximum Cutting Diameter: 360 mmMaximum Cutting Width: 700 mmMaximum Cutting Height: 340 mmMinimum Cut-Off Length: 35 mmMinimum Workpiece Size: 10 x 10 x 10 mmRemnant Length (Manual): from 10 mmRemnant Length (Automatic): from 160 mmBlade Tension: 85 barCoolant Tank Capacity: 150 lBlade Speed: 19 – 130 m/minMain Drive Motor: 5.5 kWHydraulic Pump Motor: 5.5 kWCoolant Pump Motor ...

work piece width: 1.200 mmworkpiece height: 500 mmbore diameter: 8 - 40 mmNumber of drilling agregates: 3 Stk.spindle speed:: 150 - 1.100 U / mintool changer: 15 Stksaw blade diameter: 1.430 mmcutting speed: 8 - 30 m/mintotal power requirement: 43 kWweight of the machine ca.: 20 tdimensions of the machine ca.: mWorking CapacityAngle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mmChannel sections: 80 × 45 mm to 400 × 110 mmI-beams: 80 × 46 mm to 600 × 220 mmWide flange beams (HE): 100 × 100 mm to 1,008 × 302 mmSpecial wide flange and welded T-beams: up to 1,200 × 500 mmWorkpiece DataMax. workpiece width: 1,200 mmMax. workpiece height: 500 mmDrilling UnitNumber of drilling spindles: 3 (1 vertical, 2 horizontal)Drilling diameter: 8 – 40 mmSpindle speed: 150 – 1,100 rpmDrilling feed: 0 – 500 mm/minRapid approach: 3,850 mm/minRapid return: 8,000 mm/minPositioning speed: 15,00 ...

saw blade diameter: 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 220 x 80 mmfeed length: 600 mmfeed length: multiple: 1800 mmcutting speed: 10/13/15/20/26/30 m/minmitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of machine L x W x H: 2,60 x 1,21 x 1,98 m- mitre cutting +/- 60 ° with DRO -Accessories: new sawblade 400 mmø, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mmsaw band length: 4870 mmcutting width: 500 x 250 mmtable height: 640 mmsize of profile - max.: 400 x 400 mmcutting speed: 40 - 120 m/minsaw band length: 4870 x 27 x 0,9 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 2,0 x 1,0 x 1,5 mManual band sawHydraulic saw blade tensioningHydraulic workpiece clampingHydraulic saw frame lift/lowerIncludes 4 spare saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw band length: 2910 x 27 x 0,90 mmControl: Kasto CompactControll capacity 90 degrees: round: 260 mmcapacity 90 degrees: flat: 300 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 200 mmcapacity 60 degrees: round: 165 mmcutting speed: 20-110 m/minmin. dia.: 10 mmCutting Length min.: 6 mmtotal power requirement: 2,5 kWweight of the machine ca.: 0,86 tdimensions of the machine ca.: 1,8 x 1,8 x 1,7 mFully automatic band saw (CNC)Includes right-hand roller conveyor with programmable stop carriage & digital display:Stop positioning is handled by the integrated measuring system,with the position shown to millimeter precision on the separate display.Dimensions (L x W x H): 2.70 x 1.10 x 1.70 m.Max. measuring length: 2.30 m.Includes hydraulic clamping and feed unitIncludes coolant systemIncludes work lightIncludes small parts and spare partsIncludes 2 band saw blades ...

length: 380 mm max.band length: 430 mmweight of the machine ca.: 0,5 t: : : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 380 mmpneumatic clamping: ja : 46893 weight of the machine ca.: 1,3 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mmsaw band length: 3370 mmcutting width: 350 mmdimensions of saw-band: 3370 x 27 x 0,9 mm: 280 mm: 250 mm: 350 x 200 mm: 240 mm: 220 mm: 230 x 220 mm: 170 mm: 150 mm: 170 x 100 mmsaw tape speed: 37 + 74 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,5 x 1,7 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 225 x 32 mmcutting diameter: max. 70 mm bei 90° mmmiter cut: 0°-45°-60° miter cut: 1° Skala spindle turning speed range: 42 / 84 U/minMax. round cutting cross-section at 90°: 70 mmMax. rectangular cutting cross-section at 90°: 80 x 50 mmMax. round cutting cross-section at 45°: 64 mmMax. rectangular cutting cross-section at 45°: 60 x 50 mmSaw blade diameter: 225 mmBore diameter: 32 mmIncludes lubrication systemIncludes base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

절단 직경: 420 mmsaw 밴드 길이: 5744 x 1.3 x 41 mm 절단 폭: 420 mm 절단 속도: 15 - 110 m/min: 7.5 kW 기계 무게 약 3.5 크기 약 2.9 x 2.4 x 2.1 m유압 밴드 쏘 기계, 재료 공급 1000mm - 모터 톱날 장력 - 비상 정지 장치 - 교체용 톱 밴드 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 생성되었습니다.

절단 직경: 360 mm, 쏘 밴드 길이: 0 mm 절단 폭: 0 mm 절단 속도: 0 m/최소 총 전력 요구: 1.0 kW 기계 무게 약 0.6 기계 크기 약 2.2 x 2.05 x 1.5 m 수평 밴드쏘 - 최대 마이터 각도: 45 - 냉각수 시스템 - 비상 정지 - 1300 mm 인피드 롤러 컨베이어 - 예비 톱날 2개 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

톱날 직경: 400 mm 절단 직경: 130 mm 톱날 회전 속도: 30 / 60 U/최소 용량 90도: 정사각형: 120 mm 총 전력 요구량: 4.8 kW 기계 무게 약 1.8 크기: 1.4 x 1.2 x 2.3 m반자동 냉간 원형톱 - 마이터 절단 - 마이크로 스프레이 윤활 시스템- 안전 장치- 비상 정지 장치 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

톱날 직경: 300 mm, 절단 직경: 100 mm, 톱날의 회전 속도: 40 / 80 U/최소 용량 90도: 정사각형: 90mm 용량 90도: 원형: 100mm 총 전력 필요량: 1.5 kW 기계 무게 약 0.5 t이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

절단 직경: 200 mm, 밴드 길이: 350 mm, 용량 90도: 회전: 200 mm 총 전력 요구량: 3.0 kW 기계 무게 약 0.45 크기: 1.4 x 1.4 x 1.3 m자동 해크쏘 - 1000 mm 인피드 롤러 컨베이어 포함 - 사전 설정된 카운터-재료 정지장치, 트리거 포함, 최대 600 mm- 냉각수 시스템 이 광고 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

saw blade diameter: 400 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 180 x 100 mmsaw blade turning speeds: 3000 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 0,51 tdimensions: 3,8 x 1,6 x 1,7 mAutomatic Aluminum Circular Saw- Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system- Infeed roller conveyor (3500 mm)- Transport dimensions 6.0m x 2.0m x 1.6mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

절단 직경: 230 mm 절단 속도: 35 - 70 m/mincutting 폭: 260 x 200 mm: mmsaw 밴드 길이: 2720 x 27 x 0.9 mm 총 전력 요구량: 1.1 kW 기계 무게 약 0.68 기계 크기 약 1.8 x 1.8 x 1.6 m 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

톱날 직경: 450 mm, 절단 직경: 150 mm, 절단 길이 최대: 1000 mm, 기계 무게 약 1.35, 기계 크기: 2.7 x 1.5 x 1.65 m. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

톱날 직경: 300 mm 절단 직경: 90 mm, 스트로크: mm 회전 속도: 40/80 U/최소 전력 요구량: 1.5 kW 기계 무게 약 350 kg 기계 크기 약 0.9 x 0.8 x 1.5 m냉원형 원형톱 - 기계 조명 - 냉각수 시스템 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

Width of the band swa blades: 50-200 mmSharpening pitch: 60 mmWeight: 750 kgWINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNCPNK-CNC is designed to grind all types of band saw blades used in metal cutting.PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technologyTechnical specifications:- Band saw width 50-200mm- Band saw length Max. 12m- Blade thickness Min 0.4mm- Tooth pitch Max. 60mm- Tooth depth Max. 30mm- Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°)- Feed rate (speed controlled) Max. 90 teeth/min.- Grinding wheel dimensions D: Ø250mm d:Ø20mm- Grinding wheel thickness 5-13mm (depending on tooth pitch)- CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm- CBN Grinding wheel thickness 2-3mm (depending on tooth pitch)- Grinding wheel rotation (speed controlled) 1400-5500 r.p.m.- Grinding wheel  ...

톱날 직경: 400 mm, 용량 90도: 둥근: 120mm, 용량 90도: 평면: mm, 회전 속도: 1400 / 2800 U/min, 엔진 출력: 4.0 kW 기계 무게 약 180 kg 크기: 1.0 x 0.9 x 1.2 m Manuell의 바닥 알루미늄 원형톱 이 광고 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

절단 직경: 440 mm, 톱 밴드 길이: 5200 x 1.1 x 34 mm 절단 폭: 610 x 440 mm 절단 속도: m/최소 총 전력 요구: 3.7 kW 기계 무게 약 0.8 크기 크기 대량: 2.7 x 1.55 x 1.5 m, 밴드 톱 수평 - 냉각수 시스템 - 비상 정지 스위치 이 광고 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

용량 90도: 원형: 115mm용량 90도: 평면: 100 x 150mm대역 톱 크기: 1638 x 13 x 0.65 mm: 20/29/50 m/min 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

절단 직경: 220 mmsaw 밴드 길이: - mm 절단 폭: - mm 총 전력 요구량: 0.7 kW 기계 무게 약 약 0.240 tdimension 약 m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,27 tdimensions: 1,1 x 0,95 x 1,7 m- Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hoodThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

절단 직경: 260 mm, 밴드 길이: 450 x 40 x 2 mm 용량 60도: 정사각형: 240 mm: 260 x 180 총 전력 요구: 2,0/2.6 kW 기계 무게 약 1.4 크기: 2.1 x 1.7 x 1.0 m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.