톱 사용 판매를 위해 (1,291)

Technical details Manufacturer: ZMM Vratsa Type: Horizontal metal band saw Configuration: - Hydraulic saw bow feed - Hydraulic double workpiece clamping cylinders - Adjustable machine vice - Roller material support - Hydraulic feed system - Gear-driven saw head - Coolant system - Electrical control panel Application: - Cutting steel bars - Cutting pipes and tubes - Cutting structural steel sections - General metal fabrication Construction: - Heavy-duty cast-iron frame - Hydraulic automatic cutting system Dimensions: - Length: Approx. 2600 mm - Width: Approx. 1800 mm - Height: Approx. 1700 mm Weight: Approx. 1800 kg Condition: Used Observed condition: - Machine appears mechanically complete - Hydraulic clamping cylinders installed - Feed mechanism and gearbox present - Coolant system installed - Heavy dust accumulation and surface corrosion visible - Long-term storage indications present  ...

Including roller conveyor, length 3000 mm. Auction-ID: A1-48474-55

Fully automatic hydropneumatic machine · Mitre left/right · Head oblique cuts up to 45° (Schifter) a. b. · Pneumatic double clamping device · Pneumatic vertical clamping device · Integrated coolant spraying device MPS Control: · Saving the start / end of the cut · Display of current consumption, number of pieces, Cutting time... · Adjustable water cooling · Cutting pressure regulator Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.59 t Dimensions L x W x H 1.9 x 1.4 x 1.8 m Auction-ID: A7-49782-530

Wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roll diameter 400 mm Cutting height 200 mm Cutting width 350 mm Motor power 1.5 kW Table size 400 x 500 mm Table tilt 45 degrees Saw blade length 2950 mm Condition: never used / new (5) Auction-ID: A7-49782-518

Band saw with - Ideal welding machine - Belt sander - Table tiltable -15° to +45° - Pneumatic height adjustment Roll diameter 400 mm Projection 900 mm Workpiece height 400 mm Table size 700 x 660 mm Saw blade length 4630 mm Speed 45 - 500 m/min Saw belt width max. mm Total power requirement 1.5 kW Machine weight approx. 0.8 t Dimensions LxWxH 1.95 x 0.9 x 2.25 0 Auction-ID: A7-49782-439

Manual underfloor aluminium circular saw Saw blade diameter 400 mm Cutting range at 90 degrees: around 120 mm Speed 1400 / 2800 rpm Motor power 4.0 kW Machine weight approx. 180 kg Dimensions L x W x H 1.0 x 0.9 x 1.2 m Auction-ID: A7-49782-419

Band saw with - Saw blade welding machine - Whetstone - Saw blades - Documentation Roll diameter 440 mm Projection 420 mm Workpiece height 200 mm Cutting speed 20 - 1550 m/min Table clamping area 560 x 560 mm Saw blade length 3250 mm Total power requirement 1.5 kW Machine weight approx. 0.8 t Space requirements approx. 1.2 x 0.8 x 2.1 m Condition: unchecked (6) Auction-ID: A7-49782-470

Machine number: 232597Operating voltage: 400 VNominal current: 32 ABelt length: 5080 mmControl: SIEMENS SIMATIC HMIMaterial support height: 1200 mmRoller diameter: 630 mmProjection: 370 mmMaximum cutting height: 320 mmGuide rod (hydraulic stroke): 200 mmBelt tension (hydraulic stroke): 60 mmSawing parameters - Belt speed: 250 - 2000 m/minincl. roller conveyorwidth: 350 mmReference: Heraeus Auction-ID: A7-49056-162

Band saw with - Swivel table - Footswitch - Machine light - IDEAL welding device Roll diameter 500 mm Projection 490 mm Workpiece height 220 mm Table size 600 x 600 mm Saw blade length 3350 mm Speed infinitely variable Machine weight approx. 0.4 t Space requirements approx. 1.2 x 0.8 x 1.95 m Condition: unchecked (6) Auction-ID: A7-49782-443

Wooden band saw with extendable and swivel saw table Roller diameter 200 mm Cutting height 80 mm Cutting width 180 mm Motor power 350 W Table size mm Table tilt 45 degrees Saw blade length 1400 x 6.5 x 0.35 mm Condition: never used / new (5) Auction-ID: A7-49782-512

Auction-ID: A1-49727-88

New machine SPECIAL PRICE incl.: - Starter Kit 2 - Micro spray device Ready to be demonstrated in our exhibition Roller conveyors shown optional Fully automatic hydropneumatic machine · Mitre left/right · Head oblique cuts up to 45° (Schifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.59 t Dimensions L x W x H 1.1 x 0.95 x 1.7 m Auction-ID: A7-49782-416

Rock-solid band saw - Double mitre cuts on the right up to 60°, left to 45° - AutoCut - Vise with quick-release device - Belt tension control - Electr. Automatic cooling - Material stop max 600mm Cutting diameter 250 mm Saw blade length 3150 x 27 x 0.9 mm Table height 750 mm Cutting width 170 x 310 mm Cutting speed 25 - 90 m/min Cutting capacity at 60° around 130 mm Cutting capacity at 60° square 130 mm Cutting capacity at 45° Round 205 mm Cutting capacity at 45° square 205 mm Connection voltage 400 volts Total power requirement 1.5 kW Machine weight approx. 0.5 t Dimensions L x W x H 0.95 x 1.16 x 1.98 m Condition: never used / new (5) Auction-ID: A7-49782-533

Underfloor aluminium circular saw - Hydropneumatic semi-automatic - Pneum. Workpiece clamping device - Roller conveyor with material stop, Length 3m - Feed roller conveyor, Length 3m Machine color is blue Saw blade diameter 450 mm Cutting range at 90 degrees: around 130 mm Cutting range at 45 degrees: around 100 mm Cutting area at 90 degrees: flat 210 x 170 mm Cutting area at 45 degrees: square 145 x 170 mm Speed 2900 rpm Total power requirement 2.3 kW Machine weight approx. 600 kg Dimensions L x W x H 4.0 x 1.5 x 1.5 m Condition: never used / new (5) Auction-ID: A7-49782-412

Provided roller conveyor/feed conveyor, length approximately: 3600 mm, \"MEP\" Digital longitudinal stop, \"Anma\" deburring machine, various accessories Auction-ID: A1-48474-23

Stored in working order - after a quick test it was not immediately started. Auction-ID: A3-46152-6029

Horizontal band saw, semi-automatic Cutting diameter 260 mm Cutting range at 90 degrees: around 260 mm Cutting area at 90 degrees: square 250 x 400 mm Cutting speed 20 - 80 m/min Conventional control Total power requirement 2.0 kW Machine weight approx. kg Dimensions LxWxH 2.0 x 1.4 x 1.2 m Auction-ID: A7-49782-431

Auction-ID: A1-49727-85

Double mitre band saw Cutting range at 90 degrees: around 250 mm Cutting range at 90 degrees: square 240 mm Saw blade length: 2965 x 27 x 0.9 mm Belt speed 37 / 76 m/min Total power requirement 1.0 kW Condition: unchecked (6) Auction-ID: A7-49782-445

Miter band saw Cutting diameter 170 mm Saw blade dimensions 2080 x 20 x 0.9 mm Table height 880 mm Cutting speed 40 + 80 m/min Cutting capacity at 90° Round 170 mm Cutting capacity at 45° Round 125 mm Cutting area at 90 degrees: rectangle 150 x 190 mm Cutting area at 45 degrees: rectangle 95 x 120 mm Total power requirement 1.1 kW Machine weight approx. 0.24 t Dimensions LxWxH 870 x 1,550 x 1700 mm Condition: never used / new (5) Auction-ID: A7-49782-447

Band saw with - Ideal welding machine - Grinder Roll diameter 420 mm Projection 420 mm Workpiece height 300 mm Table size 610 x 610 mm Saw blade length 3150 - 3260 mm Speed 12 - 750 m/min Machine weight approx. 0.4 t Space requirement approx. 1.2 x 0.8 x 2.0 m Auction-ID: A7-49782-464

Machine number: 1042455Cutting length: approx. 3000 mmincl. right roller conveyorRoller conveyor length: approx. 2000 mmRoller conveyor width: approx. 350 mmRoller conveyor left Length: approx. 3000 mm and width: 350 mm Auction-ID: A7-49089-156

Technical details Type: Horizontal metal band saw Configuration: - Hydraulic saw bow - Continuous metal-cutting band saw blade - Hydraulic feed cylinder - Dual hydraulic workpiece clamping system - Adjustable material feed carriage - Feed screw adjustment - Coolant lubrication system with flexible nozzle - Coolant collection tray - Separate electrical control pedestal - Heavy-duty cast-iron frame Application: - Cutting steel bars - Cutting tubes and pipes - Cutting structural profiles - Cutting solid stock - General metal fabrication Construction: - Hydraulic gravity-feed operation - Automatic cutting cycle - Integrated hydraulic power unit Dimensions: - Length: Approx. 2400 mm - Width: Approx. 1600 mm - Height: Approx. 1700 mm Weight: Approx. 1400 kg Condition: Used Observed condition: - Machine appears structurally complete - Saw head and hydraulic cylinders installed - Dual hydraulic  ...

Mounting band saw Powerful and particularly robust metal band saw with aluminium die-cast saw table and infinitely variable cutting speed for Mitre cuts up to 60° Cutting range at 90 degrees: around 130 mm Cutting range at 90 degrees: square 130 mm Cutting area at 90 degrees: rectangle 130 x 125 Saw blade dimensions 1440 x 13 x 0.65 mm Dimensions L x W x H 350 x 690 x 520 m Belt speed 30 - 80 m/min Total power requirement 1.2 kW Machine weight approx. 19 kg Condition: never used / new (5) Auction-ID: A7-49782-519

Forte SBA 241 Automatic Band Saw Cutting diameter 10 - 250 mm Saw blade length 4,100 mm Cutting width 1.1 mm Max. section length 3 - 9,999 mm Cutting speed 11 - 110 m/min Saw blade dimensions 4,100 x 34 x 1.1 mm Total power requirement 1.4 kW Machine weight approx. 1.0 t Space requirements approx. 2.0 x 2.0 x 1.5 m Auction-ID: A7-49053-13

Description: -Mitre cuts up to 60° left -Cutting speed 35 / 70 m / min. -Vice with quick-release device -Saw blade guide made of carbide -Belt tension control -Electr. Automatic cooling Auto-Cut System = 3 Stages System -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch -High-speed lowering of the saw frame from the resting position to the workpiece, then switch to normal saw feed -Manual operation Cutting diameter 220 mm Saw blade length 2455 mm Table height 850 mm Cutting width 230 mm Cutting speed 35 + 70 m/min Saw blade dimensions 2455 x 27 x 0.9 mm Cutting capacity at 60° around 90 mm Cutting capacity at 60° square 90 mm Cutting capacity at 60° flat 90 x 100 mm Cutting capacity at 45° Around 150 Cutting capacity at 45° square 150 Cutting capacity at 45° rectangle 150 x 210 Cutting capacity at 90° Round 220 mm Cutting ca ...

Technical data Manufacturer: Behringer Type: HBP 220 Design: horizontal metal band saw machine Dimensions L × W × H: approx. 1,900 × 1,100 × 1,800 mm Weight: approx. 1,500 kg Configuration With workpiece clamping device, saw blade protective covers, pressure indicators, adjustable saw feed, separate control console with push buttons, main switch and emergency stop as well as machine light. Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-16

Miter Band Saw -Mitre cuts up to 60° left -Vice with quick-release device -Belt tension control -Electr. Automatic cooling Cutting diameter 225 mm Saw blade length 2455 mm Table height 850 mm Cutting width 245 x 150 mm Cutting speed 45/90 m/min Saw blade dimensions 2480 x 27 x 0.9 mm Cutting capacity at 60° around 90 mm Cutting capacity at 60° square 90 mm Cutting capacity at 45° Round 145 mm Cutting capacity at 45° square 145 mm Connection voltage 400 volts Total power requirement 1.5 kW Machine weight approx. 0.2 t Dimensions L x W x H 1.43 x 0.72 x 1.7 m Condition: never used / new (5) Auction-ID: A7-49782-462

with material support Auction-ID: A1-49000-27

Auction-ID: A1-49612-25