선반 사용 판매를 위해 (3,145)

turning diameter over bed: 480 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: - mmturning speeds: 90 - 1120 U/mincentre height: 240 mmspindle bore: 52 mmtotal power requirement: 7,5 KWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 3,0 x 1,3 x 1,5 mEngine Lathe- 3-jaw chuck (200 mm)- Quick-change tool post- Steady rest- Machine lamp- Chip tray- Center pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

회전 직경: 465 mm 회전 길이: 1050 mm 제어: 하이덴하인 X축: 300 mm 총 전력 요구량: kW 기계 무게 약 7600 kg 기계 크기 약 : m. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

회전 직경: 100 mm 회전 길이: 75 mm 제어: FANUC Oi-TF 총 전력 요구량: 기계 무게 약 15 kW 무게 약 약 15 kW 기계 크기: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

turning diameter over bed: 1600 mmturning diameter over slide rest: 1280 mmturning length: 5000 mmcentre height: 800 mmspindle turning speed range: 1 - 200 U/minspindle bore: 105 mmspindle diameter in front bearing: 120 mmmain drive motor: 75 kWmax. workpiece weight between centres: 30000 kgworkpiece weight in steadies max.: 40000 kgbed slide rapid adjustment: 4000 mm/min.total power requirement: ca. 100 kWweight of the machine ca.: 52 tRefurbished in 2020 and equipped with:- 4-jaw faceplate Ø 1600- thread cutting- 4-fold heavy duty tool holder- Hardened tracks- tailstockdiffenret Steadies, chip conveyor and other accessories, available upon requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 256 mmturning length: 530 mmcontrol: Fanuc 31i-A turning diameter over bed: 550 mmturning diameter over cross slideways: 350 mmmain spindle:: max. turning speeds: 6000 min/-1Drive power - main spindle: 11 kWmax. torque: Nmmax. rod diameter: 45 mmspindle head: A2-5 chucking diameter: mmtool turret:: shaft height for square tool: 25 mmDrill shank diameter: 50 mmtravel:: x-axis: 210 mmz-axis: 560 mmfeeds:: rapid traverse: x 20 / z 24 m/mintotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 mTechnical Specifications:- Manufactured in 2017 but not put into operation until 2021- Fanuc 31i mod A CNC control- Y-axis- 20 bar tool cooling- Fedek bar loader- Chip conveyor- 12-station tool turret- 10 rotating toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

회전 길이: 1500 mm, 베드 위를 돌리며 회전하는 거리: 490 mm, 회전 직경 면면 슬라이드: 280 mm 제어: Heidenhain 수동 플러스 속도 범위 - 최대 3000 U/minspindle 보어: 65 mm 출력 - 작업물 출력: 12/16 (100/60%) kW 기계 무게 약 3.5 t. 장비/액세서리: - 안정된 자세 - 척 - 공구 홀더- 드릴 비트 - 팁 - 멀티픽스 홀더 이 광고 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

turning diameter over bed: 500 mmturning diameter over slide rest: 330 mmturning diameter in the gap: 600 mmturning length: 3000 mmbed width: 505 mmspindle bore: 72 mmspindle head: DIN 55022 Gr. 8taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/minpower requirement: 18,5 kWdimensions: 5,3 x 1,75 x 1,53 mweight of the machine ca.: 5,2 tused lathe in nice condition with digital scale- 2 axis digital scale- 4 jaw chuck Ø 250 mm- 3 jaw chuck Ø 260 mm- Multifix C toolholder system- some toolholders- steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mmturning diameter over slide rest: 190 mmturning length: 1000 mmturning dia. in gap: 460 mmspindle head: DIN 55026 Gr. 6spindle bore: 52 mmturning speed range: 11,2 - 2240 U/minpower requirement: 7,5 kWbed width: 355 mmdimensions: 2,8 x 1,3 x 1,6 mweight of the machine ca.: 1,9 tEquipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 400 mmcentre distance: 3.000 mmmax. swing over bed: 810 mmmax. swing over facing slide: 510 mmmax. swing-dia. in gap: 850 mmcontrol: WEILER max. workpiece weight: 3.800 kgspindle diameter in front bearing: 150 mmspindle bore: 106 mmfaceplate diameter: 630 mmworktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mmspindle turning speed - stepless: 1 - 1.800 U/minLathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor.A comprehensive tool package is included in the scope of delivery.The machine video from the production plant will be shared on request.The machine is in good condition and can be inspected under power at any time.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - ...

turning diameter: 430 mmturning length: 1500 mmcontrol: OSP P300 turning diameter over bed: 670 mmturning dia. over face-slide: 480 mmWorkingspindle:: power capacity - main spindel: 30/22 kWturning speed range - main spindle: 0 - 3000 U/minmax. bar capacity: 95 mmspindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/mintravel -x axis: 270 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/mintravel -y axis: 120 mmtotal power requirement: 29 kVAweight of the machine ca.: 8,6 tdimensions of the machine ca.: 4,3 x 2,25 mCCNC turning and milling centerequipped with:- CNC control OKUMA OSP P300- 12-fold Tool Revolver for driven tools- Tailstock- Chip conveyor- self-centering Chuck 315 mm Autoblock- 2 motorized radial modules- 2 axial modules for thermal expans ...

turning diameter over bed: mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mmy-travel: 210 mmz-travel: 1150 + 100 mmcontrol: Fanuc MSX-701III Maximum turning diameter: 660 mmMax. turning length: 1498 mmDiameter over cross slide max.: 400 mmnumber of spindle speeds: 3000 U/mintool piece magazine with: 40 Plätzenturret: 10 Fachtotal power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

회전 직경: 430 mm 회전 길이: 519-525 mm 제어: 모리 세이키 MSX-805 x축: 230 mmz, 축: 520 mm 총 전력 요구: kW 기계 무게 약 4100 kg 기계 크기 약 m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

: 0560 mm: 390 mm: 2000 mm: 280 mm: 80 mm: 11,25 kWspindle turning speed - stepless: 20-2000 U/minspindle taper: K 8 DIN 55027 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...

turning diameter over bed: 3750 mmturning diameter over slide rest: 3250 mmturning length: 15000 mmcentre distance: 15000 mmfaceplate: 3000 mmworkpiece weight: 120 tsteady: + 15t Rest: 2 main drive: 119 kWspindle bore: 105 mmspindle turning speed range: 0,33 - 75 U/minfeed in x - axis: 300 mm/minfeed in y - axis: 150 mm/mintailstock quill diameter: 500 mmtotal power requirement: ca 140 kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 2-Carriages- Face Plate 3000mm- 6-Steady Rests- 4-Way Bed Construction- Taper Attachment- Inch/Metric Threading- Tailstock With Live CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

회전 직경: 550 mm 회전 길이: 1500 mm 제어: 파고르 8055 x축: 108 mmz-축: 3000 mm 총 전력 요구량: kW 기계 무게 약 : 기계 크기: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

turning diameter: 500 mmturning length: 1000 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,1 tAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

회전 직경: 1.320 mm 회전 길이: 5000 mm 회전 직경: 1250 mm 작업물 무게: 14 슬라이드 회전 직경: 900 - 950 mm 총 전력 요구량: 45 kW 기계 무게 약 18 t이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

베드에서 회전 직경: 340 mm 슬라이드 레스트 기준 회전 직경: 177 mm 회전 길이: 630 mm 회전 속도 - 무단계: 55-3000 U/기계 최소 중량 약 1.55 기계 크기: 약 2 x 1 x 1.6 m, 디지털 표시 HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/minturning speeds: 1) 0,7 - 5,6 U/minturning speeds: 2) 2,8 - 22,4 U/minturning speeds: 2,1 - 56 U/mintool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

선동 직경: 330 mm 회전 길이: 650 mm 회전 속도 - 무단계: 30-5000 U/minspindle 테이퍼: ASA A2-5 제어: FANUC 18i-T 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

회전 직경: 340 mm 회전 길이: 1000 mm 제어: Mazatrol SmoothC 총 전력 요구량: kW 기계 무게 ca.: 기계 tdimensions ca.: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

페이스플레이트 직경: 4500 mm 회전 직경: 5000 mm 회전 높이: 2500 mm 작업물 최대 무게: 63 tno. 슬라이드 중 최대 2개. 램 스트로크: 1600 mm 페이스플레이트 회전 속도 범위: 0.3 - 32 U/min Drehzahlstufen 안잘의 회전 속도: 4 총 전력 요구: 130 kW 기계 무게 약 145 크기 크기: 6.6 x 11.4 x 8.4 m - DRO- 2개의 회전 가능한 램 (-15 / +40) 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.