하위 범주
(3 카테고리 레벨)
생산자:
(범주: 102)
Technical data CONTUR CNC lathe MSL-450, built in 2011 Control: Siemens SINUMERIK 828D Max. turning diameter: 450 mm Turning diameter over bed: 700 mm Turning diameter over slide: 530 mm Max. turning length: 600 mm Bar Passage: 75 mm Chuck diameter: 10\" Spindle speed: 100–3,500 rpm Spindle nose: ISO A2-8 Spindle bore: 90 mm Turret: 12 tool positions, VDI 40 Travel X/Z: 250 / 670 mm Rapid traverse X/Z: 24 / 24 m/min Tailstock: MK5, travel 650 mm Weight: approx. 4,700 kg Dimensions: approx. 2,780 × 1,620 × 1,730 mm Configuration 3-jaw chuck, 12-cavity turret, tailstock, chip conveyor, machine light and signal light. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-200
Machine number: 586034Operating voltage: 400 VFrequency: 50 HzConnection: 16 kVARated current: 25 AHours read: 2609Control: SIEMENSCenter width: 3010 mmRotation diameter over face slide: 310 mmMax. rotation diameter: 580 mmDisplacement face slide: 265 mmSpindle diameter in front bearing: 120 mmMaterial passage: max. 72 mmChuck diameter normal: 250/315 mmSpeed range: 3 - 2800 rpmOuter diameter of the Quill: 75 mmQuill stroke: max. 160 mmInner cone: MK 5incl. documentation, chip conveyor, a workshop cabinet Auction-ID: A7-49089-396
Machine number: 431Operating voltage: 460 VFrequency: 50 HzConnection: 33 kWRated current: 56 AReading operating hours: 18,538incl. the clamped tool holders and tools shown in the photosControl: TRAUB SYSTEM TX 8iMain spindle:Rod passage: 36 mmMax. speed: 6300 rpmDrive power at 100/40% Working cycle: 6.7/10.7 kWTorque at 100/40% Working cycle: 21/32 NmTool turret top:Number of tool stations: 12X-axis travel: 50 mmY-axis travel (option): +-20mmZ-axis travel: 100 mmRapid traverse X/Y/Z: 15/15/15 m/minX/Y/Z measuring system resolution: 0.0005/0.001/0.001 mmInput force X/Y/Z: 4240/4240/4240 NFront unit:Number of tool stations: 5Diameter: 40 mmDistance: 54 mmX-axis travel: 370 mmZ-axis travel: 250 mmRapid traverse X/Y: 30/30 m/minInput force X/Z: 2800/2120 NMeasuring system resolution X/Z: 0.0005/0.001 mmRear unit:Number of tool stations: 5Diameter: 40 mmDistance: 54 mmTravel X-axis: 73 mmTr ...
Machine number: 313154Operating voltage: 400 VFrequency: 50 HzRated current: 64 AConnection: 44 kVAControl: GRUNDIG ELTROPILOTCirculation diameter over bed track cover: 570 mmCirculation diameter over plan guide cover: 420 mmPlane travel: 220 mmLongitudinal travel: 635 mmMain spindle Spindle head diameter: 170 mmSpindle diameter in front bearing: 120 mmSpindle bore: 79 mmChuck diameter: 200/250 mmSpeed range: 25 to 5000 rpmC-axis Speed: 100/minHolding torque: 200 NmPitch accuracy: 0.04°Rapid traverse speed X-axis: 20 m/minRapid traverse speed Z-axis: 24 m/minincl. 12-fold tool turret, 6 of which are drivenTailstock diameter in the front area: 80 mmTailstock Travel: 515 mmTailstock mount: MK 4The machine is equipped with a tailstock as well as the tool holders located in the tool turret and a three-jaw chuck, diameter: 200 mmReference: Hanon - Lot 25 Auction-ID: A7-49056-12
Serial number: 109640Power: 8 kWVoltage: 400 VFrequency: 50 Hzincl. digital display ACU-RITEincl. tailstock, Multifix grain holder and three-jaw chuck, diameter: approx. 310 mmCenter height: 330 mmCenter width: 3000 mmCenter height in offset: 435 mm Bridgelength: 240 mmSpindle bore: 82 mmMax. torque: 1500 NmSpinde speed: 9 - 1600 rpmTop slide travel: 145 mmCross slide travel: 310 mmTool Dimensions: 25 x 25 mmTailstock Cone: MK 5Quill Diameter: 75 mmQuill Travel: 150 mmReference: Wowi - Lot 67 Auction-ID: A7-49056-192
Operating voltage: 230 VFrequency: 50-60 HzRated current: 11 AControl: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)Turning length: approx. 300 mmCenter height above bed: approx. 100 mmTravel X: approx. 100 mm, Z: approx. 200 mmThe machine is equipped with a tailstock, a three-jaw chuck and a special tool turretincluding a mobile workbench and matching accessories Note: An identical and completely identical machine will be delivered and not exactly the one that can be seen in the photos. The illustrations serve only as examples. It cannot be guaranteed that the accessories shown are included in the scope of delivery Auction-ID: A7-49056-36
Cazeneuve HBX 360 precision conventional centre lathe with chuck, toolpost and tailstock. Well-known toolroom lathe; used condition with visible wear. Full specifications to be confirmed. Auction-ID: A1-49190-43
Lead and pull spindle lathe Three-jaw chuck 200mm Multifix Steel Bracket Size B 3 Multifix cassettes Emergency Stop Facility Turning diameter over bed 370 mm Turning diameter over support 200 mm Turning length 1000 mm Center height 185 mm Spindle bore 56 mm Tailstock quill holder MK 4 Speed 50 - 2000 rpm Drive power 4.0 kW Machine weight approx. 1.4 t Dimensions approx. 2.3 x 1.1 x 1.3 m Auction-ID: A7-49782-403
3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake removable chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-514
Fanuc 18i-TB control,5 axes (X, Z, Z2, C main spindle, C counter spindle),max workpiece diameter X600,max turning diameter X330,max turning length 500,max length Z2 axis 500,12-position tool head,12-position driven tools,10” main holder C axis,6” counter spindle C axisOther machines, devices and tools unrelated to the subject of sale visible in the photos are not part of the offer. Auction-ID: A7-49398-6
Machine number: 34101101Operating voltage: 400 VRated current: 128 AFrequency: 50 HzPower: 89 kVA Operatinghours read: 2782Turning length: 3000 mmCenter height above floor: 1270 mmCirculation diameter over slide top: 520 mmCirculation diameter over telescopic left: 520 mmCirculation diameter over steady rest slide: 520 mmMain spindle left, spindle diameter in front bearing: 160 mmSpindle bore: 77 mmSpindle speed: 4000 rpmTorque: max. 630 Nmtailstock moving built-in centering tip: MK 5tailstock Quill diameter: 135 mmStarting force: 200 to 1200 daNMax. workpiece weight: 1000 kgTurning-drilling-milling unit Drive power: 15 kWTorque: max. 190 NmTool holder: HSK 63The machine is equipped with a tailstock, a moving steady rest SMW Autoblock and a three-jaw chuck RÖHM, diameter: 310 mmincl. matching workshop cabinet and workbench with large items Documentationmax. tool length: 500 mmmax. tool ...
Machine number: 586034Operating voltage: 400 VFrequency: 50 HzConnection: 16 kVARated current: 25 AHours read: 839Turning length: 1000 mmCenter height above bed: approx. 250 mmTurning diameter over bed: approx. 500 mmCenter height over support: approx. 150 mmTurning diameter over support: 300 mmThe machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck, Diameter: 250 mmincl. steady rest, clamping jaws, another chuck, documentation Auction-ID: A7-49089-363
centre height: 400 mmcentre distance: 2.000 mmturning diameter over bed: 810 mmcontrol: WEILER D3 turning diameter over slide rest: 510 mmturning length: 2.000 mmspindle head: DIN55027 Gr.11 spindle diameter: 150 mmspindle bore: 106 mmTurning Speed - Range 1: 1 - 450 U/min.power capacity at 60% / 100 % load: 37,00 / 30,00 KWmax. torque at 60% / 100% load: 3.205 / 2.599 NmTurning Speed - Range 2: 4 - 1.800 U/min.power capacity at 60% / 100 % load: 37,00 / 30,00 KWmax. torque at 60% / 100% load: 813 / 659 Nmface slide travel: 410 mmupper slide-support travel: 140 mmlongitudinal feed: 0 - 5 mm/Uface feed range: 0 - 5 mm/U.power feed longitudinal: 20.000 Nfeeding force facing: 10.000 Nrapid travel - longitudinal/face: 10 / 5 m/mintool taper: Capto C6 tailstock quill diameter: 115 mmtailstock quill stroke: 225 mmtailstock quill taper MT: 6 thread - mm pitch: 0,1 - 250 mmthread - inch: 1/4 - ...
Machine number: 344Operating voltage: 460 VConnection: 33 kWRated current: 56 AControl: TRAUB SYSTEM TX 8iMain spindle:Bar passage: 36 mmMax. speed: 6300 rpmDrive power at 100/40%Working cycle: 6.7/10.7 kWTorque at 100/40%Working cycle: 21/32 NmTool turret head top:Number of tool stations: 12 TravelX-axis: 50 mmTravel Y-axis (option): +-20mmTravel Z-axis: 100 mmRapid traverse X/Y/Z: 15/15/15 m/minResolution of the measuring system X/Y/Z: 0.0005/0.001/0.001 mmInput force X/Y/Z: 4240/4240/4240 NFront unit:Number of tool stations: 5Diameter: 40 mmDistance: 54 mmTravel X-axis: 370 mmTravel Z-axis: 250 mmRapid traverse X/Y: 30/30 m/minInput force X/Z: 2800/2120 NResolution of the measuring system X/Z: 0.0005/0.001 mmrear unit:Number of tool stations: 5Diameter: 40 mmDistance: 54 mmTravel X-axis: 73 mmTravel Y-axis: +-50 mmRapid traverse X/Y: 15/15 m/minInput force X/Z: 4240/4240 NResolution ...
Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-498
Serial number: 0577Voltage: 400 VFrequency: 50 HzTip height: 280 mmDistance between tips: 2000 mmCirculation diameter over bed: 560 mmCirculation diameter over cross slide: 390 mmRotation diameter in offset: 810 mmSpindle bore: 80 mmSpindle holder: MK 7Centering tip holder: MK 5Spindle speed: 20 - 1600 rpmMotor power: 7.5 kWBed width: 345 mmBed length: 2650 mmTravel cross slide: 265 mmtravel upper slide: 135 mmTravel tailstock: 180 mmDiameter tailstock quill: 75 mmDiameter lead screw: 35 mmPitch lead screw: 6 mmincl. two-axis digital display, manufacturer EASSON, type: ES-8, as well as three-jaw chuck, diameter: approx. 400 mmwith Multifix base holder and tailstock and an additional steady rest and a side cabinet with stock of turning steels, turning steel holders, reducing sleeves and other clamping jawsReference: Wowi - Lot 40 Auction-ID: A7-49056-188
Lead and pull spindle lathe - 4-jaw chuck 200mm - Multifix steel bracket size B - Foot brake - Chip tray Turning diameter over bed 420 mm Turning diameter over support 290 mm Turning length 900 mm Speed 40 - 2000 rpm Tip height 210 mm Spindle bore 38 mm Total power requirement 4.0 KW Machine weight approx. 0.9 t Space requirement approx. 2.4 x 1.1 x 1.3 m Condition: unchecked (6) Auction-ID: A7-49782-499
3-jaw chuck 200mm 4-fold steel holder Turning diameter 350mm Turning diameter via support 210 in offset 500mm Turning length 1000mm Speed 20 - 1400rpm Spindle bore 36mm Motor 2.0 KW Weight 600Kg Dimensions 2.2 x 1.0 x 1.5m Auction-ID: A7-49782-493
Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Rotating center punch Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-442
SINO Digital Display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 250mm Fixed bezel Quick-change steel holder with 4 pcs steel holder Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 38 mm Tailstock quill mount MK 3 Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5) Auction-ID: A7-49782-500
Guide and tension spindle lathe machine - Forkardt-3 jaw chuck F 315 - Single steel holder - Bezel - Moving center punch - Feed protection, Limit switch monitored - Chip tray Turning diameter over bed 600 mm Turning diameter over support 400 mm Turning length 1000 mm Turning diameter in the offset 850 mm Speed 15 - 810 rpm Center height 300 mm Spindle bore 56 mm Total power requirement 9.0 KW Machine weight approx. 2.9 t Dimensions approx. 2.8 x 1.45 x 1.65 m Auction-ID: A7-49782-417
Cegonheira conventional centre lathe with chuck, toolpost, tailstock and screwcutting gearbox. Used industrial lathe; centre distance, spindle bore and operation to be confirmed. Auction-ID: A1-49190-17
Turning diameter max. 390 mm Turning length max. 572 mm Control MSD 501 Circumferential diameter over bed 700 mm Circumferential diameter over face slide 560 mm Distance between tips 725 mm Standard turning diameter 248 mm max. turning diameter 1: 390 / 2: 260 mm Main spindle: Speed range - main spindle 35 - 3,500 min/-1 Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A2-8 Spindle bearing diameter 130 mm Spindle bore 86 mm Usable rod diameter 62 mm Travels: x-axis 1: 238 / 2: 173 mm z-axis 1: 650 / 2: 650 mm Tool turret: Number of turrets 2 Number of tool positions 10 + 8 pos. Number of driven tool stations - pos. Switching time 0.3 sec Shaft diameter 25 mm Shank diameter of the drills max. 50 mm Tailstock: Tailstock travel 500 mm Quill diameter 110 mm Tailstock mount MK 5 Quill stroke 150 mm Feeds: Rapid traverse X1/2: 18 m/min Rapid traverse Z1/2: 24 m/min Feed ...
Technical data Manufacturer: GUILD MASTER Model: CTX 400 Machine Type: CNC Lathe Control: Gildemeister CNC / ElektroPilot Operating hours: approx. 18,462 h Max. turning diameter: 400 mm (Source: online) Max. turning length: 640 mm (Source: online) Circumferential diameter over bed: 500 mm (Source: online) Spindle bore: 72 mm (Source: online) Speed range: 25 - 5,000 rpm (Source: online) X-travel: 212 mm (Source: online) Z-travel: 640 mm (Source: online) Tool turret: 12-speed (Source: online) Tool holder: VDI 30 (Source: online) Machine weight: approx. 5.1 - 5.5 t (Source: online) Configuration 3-jaw chuck Berg KH200 12-speed tool turret Powered tools available Tool turret prepared for powered tool holders Chip conveyor available Coolant equipment available Closed work area cladding CNC controller with screen Note No original technical documentation available. The technical data was r ...
8.000 € 
