板金加工 中古 販売のため (3,366)

: neu : 2025 : 090081 : prompt, Zwischenverkauf v : Türkei : 3810 €: 1 : 1020 mm: 1.5 mm: 500 mm: 1950 mm: 1000 mm: 1150 mm: 420 kgwelded steel constructionwith manual hold down unitback gauge adjustable by handwheelusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 951 €: 1 1/2 48,3 mm, 2 60,3 m mm: 3 mm: 2.5 mm: 15 kgThe AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 €: 613.11 €: 1 : 3100 mm: 4 mm: 42 1/min: 1,5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsball in the tabletape measuretilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

直径:250mm ワークピースの長さ:120mm ワークピース幅:120mm 総電力要求:1.6kW 機械の重量約:0.2 機械の寸法約:1.2 x 0.8 x 1.3 mこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

round bar steel: 33 mmsquare edge steel: 30 mmL-beam: 60 x 8 mmhole diameter in sheet thickness: 20 in 13 mmhole punhing press: pressure: 35 thole punching press: throat: 320 mmhole punching press: max. length of stroke: 24 mmhole punching press: capacity (dia. x thick.): 30 x 9 mmhole punching press: capacity (dia. x thick.): 20 x 13 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1,5 x 0,7 x 1,8 mProfile steel shear with:- Hole punch- Notcher- Foot switch- Machine light- Mounted on a trolleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

シート幅:2040 mm 板厚:3.0 mm 柱間距離:2060 mm バックストップ - 調整可能:mm 下部ビームの調整:110 mm 上部ビームのストローク:270 mm 総電力要求:7.5 kW 機械の重量約:3.7 機械の寸法 約:3.1 x 1.5 x 1.5 m本広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され� �した�

consisting of 1 handheld device, 8 bending inserts from 10 - 22 mm Auction-ID: A1-41001-40

Auction-ID: A1-41001-86

pressure: 135 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 135 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90.0 mmNumber of working hours: ca. 40.0 hcontrol: DA 58 T oil volume: 200 ltr.voltage: 400 Volttotal power requirement: 11.0 kWweight: 8186 kgrange L-W-H: 4250 x 2150 x 2800 mm machine has rarely been in use with only approx. 40 operating hours () current new price approx. 80.000 Euro special price on request---------------------------------------------------------POWER BEND PRO electro-hydraulic press brake with : increased installation height increased cylinder stroke increased throat depth---------------------------------------------------------Equipmen t:- CNC electro-hydraulic press brake- DELEM CNC control model DA-58T graphics/touchscreen 2D graphic pr ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 20 mm: 20 mm: 12 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 5 : 5 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16000 €: 307.2 €: 2050 mm: 4 mm: 140 mm: 2.2 kW: 3200 mm: 750 mm: 1000 mm: 1650 kg3 reelsasymmetrical roller arrangement - with pre-bending2 driven rollers by means of a brake motormanual Back Rollupper roller can be swiveled forwardforward / reverse runconical rounding by inclining the rear rollersmovable control panelOPTIONS:hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out (sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

最大曲げ角:180 高さ:100 mm クランプ範囲:40 mm 重量:45 kg 寸法(L/W/H):420 x 270 x 210 mm この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-41035-26

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-41035-228

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-41035-35

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-41035-60

: neu : ca. 10 Wochen ab Auftrags : Türkei : 2900 €: 1270 mm: 1.2 mm: 68 mm: 1.5 kW: 1610 mm: 700 mm: 1160 mm: 385 kg3 Walzenasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 8225 : prompt, Zwischenverkauf v : Österreich : 880 €: 1 : 1020 mm: 1.25 mm: 135 °: 1500 mm: 700 mm: 1250 mm: 200 kg: 50 mmPointed rail 45°,Attachment rail 15 mmAdjustable stop for bending angleCounterweight for bending beamSheet metal clamping with hand crankmax. opening of the upper beam 50 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 9670 : prompt, Zwischenverkauf v : Türkei : 14900 €: 1 : 60 mm: 177 mm: 3 : 3.7 kW: 6 m/min: 70x10 mm / 600 mm, 30x10 : 90x25 mm / 500 mm, 50x5 m : 40x40 mm / 500 mm, 20x20 : Ø. 40 mm / 500 mm, Ø 20 m : Ø 60x2 mm / 600 mm, Ø 20x : 80x40x3 mm : 60x60x4 mm : 50x5 mm / 1.000 mm, 30x4 : 50x5 mm / 500 mm, 30x3 mm : 1160 mm: 1000 mm: 1175 mm: 1194 kgdemo machine / mint conditionnet price3 driven rollsstrong welded steel constructionlower rolls hydr. adjustabledigital read-out for lower rollspositions on seperate control panelplane and hardened universal rollslateral rolls adjustablein 3 axes manual/hydr.horizontal and vertical operationfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 235 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 1500 mm: 6 mm: 6 mm: 4 mm: 5 mm: 4 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement of  ...

sheet width: 3050 mmplate thickness: 10.0 mmthickness at Niro-steel: 6.0 - 8.0 mmdown holder: 13 Stückdistance between columns: 3070 mmcutting angle: 1.0 - 4.0 °no. of strokes: ~ 22 Hub/minControl: ELGO P8511 oil volume: 240 lvoltage: 400 Vtotal power requirement: 15.0 kWweight: 8000 kgrange L-W-H: 3550 x 2350 x 1900 mm good / well-maintained condition with special accessories ()Equipment:- NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body)- NC ELGO digital control unit P8511- NC electro-motorized backgauge on ball screws- electro-hydraulic cutting angle adjustment Front analog cutting angle display- 1x stable side stop, with T-slot and mm scale- 3x stable support arms, with T-slot and mm scale- Ball castors in the work table incl. recessed grips- Front finger guard - can be folded up at the front- 1x freely movable foot switch- 2x front EMERGENC ...

pressure: 40.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 200 mmstroke: 100 mmdayligth: 308 mmajustment speed: 150 mm/secworking feed: 1-10 mm/secreturn speed: 100 mm/sectable width: 100 mmtable height: 900 mmcontrol: DNC 60 PS oil volume: 100 lvoltage: 400 Vtotal power requirement: 5.5 kWweight of the machine ca.: 2750 kgEquipment:- CNC electro-hydraulic press brake- CYBELEC DNC 60 PS CNC control Swiveling control panel, front left Tool & program library- CNC electro-motorized backgauge (X-axis) X-axis travel = 800 mm 2x manually adjustable backgauge fingers (R+Z axes) Backgauge on ball screws- CNC controlled axes Y1 - Y2 - X- Rehfuß upper tool system A with quick-change clamping Additional crowning device in the tool holder- 4V universal die block with 60 mm die shoe- 2x sliding material/support arms (Sliding System)- BOSCH/HOERBIGER hydraulic system- SIEMENS ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45900 €: 876.69 €: 3100 mm: 3.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4520 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° € 48.500,--OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 12.100,--(sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090054 : prompt, Zwischenverkauf v : Spanien : 17300 €: 332.16 €: 1 : 55 to: 250 mm: 5 : 40/10 mm: 20 mm: 37 1/min: 300x15 mm: 120x10 mm: 40 mm: 10 mm: 5 kW: 1670 mm: 1160 mm: 2090 mm: 1390 kg2 foot pedal for independent working on 2 stationsflatsteel stationanglesteel stationround- and square steel stationrectangular notching stationpunching stationtable on flat steel stationtable on punching stationtable on notching stationcomplete with hydraulic oiluser manual in GERMAN and ENGLISHOPTION:Kit € 930,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9741 : prompt, Zwischenverkauf v : Türkei : 6200 €: 119.66 €: 1 : 1050 mm: 3 mm: 90 mm: 6 m/min: 1.1 kW: 1630 mm: 700 mm: 1200 mm: 480 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 163101 €: 3082.61 €: 2000x6000 mm: Hypertherm XPR 170 CORE : 60 mm: 38 mm: 38 mm: 35 mm: 22 mm: 25 mm: 170 A: 12 m/min: 35 m/min: +/- 0,1 mm: 0,1 mm: 6000 kgHyPerformance plasma power sourceHyperthermXPR 170 COREWITH ",TRUE HOLE", TECHNOLOGYAutomatic gas consolePlasma torch height controlCollision protection (torch brake away system)CNC control with Aurora SoftwareLantek CAD/CAM software with auto nestingControl of filter unit by CNCRemote control diagnostic by EthernetCutting plate alignment functionUser manual in GERMAN or ENGLISHOptions: Suction with filter Morepricefor Optimix instead of CoreFurther options as CNC bevel head, drilling head, oxyfuel torch, Durma cloud etc. on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6200 mm: 1.5 mm: 2 mm: 7 : 7 : 1130 mm: 180 mm: 915 mm: 4 kW: 6730 mm: 7380 mm: 1435 mm: 1460 mm: 3800 kghydraulic drivestandard controladditional rail on the bending beam2x foot pedalremoveable material supportsafety equipment accoring to the control rules BG GermanyStands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST.OPTIONAL EQUIPMENT: manual rotary shear price on request powered rotary shear St/Al 1,25/1,5 mm price on request powered rotary shear with cutting head ",S", St/Al 1,5/2,0 mm price on requestCONTROLBM 10 7-inch display, presetting of up to 10 different ...

: gebraucht : 2004 : 9726 : prompt, Zwischenverkauf v : Türkei : 6750 €: 1 : 1350 mm: 3 mm: 35 1/min: 1,5 °: 550 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 1700 mm: 1350 mm: 1200 mm: 950 kgmanualback gaugeautomatic sheet hold downhold down with rubber padsmoveable foot switchside support arm2 supporting armsuser manual in GERMANdoes not complie with the German UVV and Austrian AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 €: 226.56 €: 1270 mm: 4 mm: 120 mm: 3 m/min: 2.2 kW: 2470 mm: 750 mm: 1000 mm: 1110 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls€ 1.250,-Motorised Back Roll (Power Rear Roll)€ 1.200,-Digital Read-Out€ 1.200,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.