曲げプレス (119)

pressure: 1250 tchamfer lenght: 15000 mmdistance between columns: 10160 mmControl: CNC 10 Grafik total power requirement: kWweight of the machine ca.: 230 tdimensions of the machine ca.: 17000 x 5400 x 5900 m- Pressure: 1.250t- Bending length:15.000mm- Control: CNC 10 graphics- No. of axes axes: min. 10- Frame width: 10.160mm- Projection: 770mm- Table length: 15,000mm- Dimensions: 17,000mm x 5,400mm x 5,900mm- Mass: approx. 230tEquipment- Crowning device- CNC 10 control with graphics- Hydr. clamping of the upper tools- Multi-man operation- Increased speeds- Automatic height-adjustable rear sheet stop- die cushion device- Horn length 2,200 mm on both sidesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 3000 tchamfer lenght: 14000 mmdistance between columns: 10500 mmControl: CYBELECCNC 7000 m. Grafik table width: 1000 mmstroke: 1300 mmmin./max.distance between table and ram: 1800 mmcontrolled axis: Y1, Y2, X1, X2 total power requirement: kWweight of the machine ca.: mind. 465 tdimensions of the machine ca.: 14600 x 4200 x 7200 mm- throat depth: 700 mm- controlled axes: Y1, Y2, X1, X2- Dimensions (length x width x height):- Foundation depth for table: 3400 mm- Foundation depth for stand: 1700 mm- Dimensions of the individual components for transportation:- Table: 14020 x 4270 x 910 mm, weight approx. 125 tons- Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons- 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each- Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons- 2 pcs. Container 40” for cylinder, electrics and various attachments- Control sys ...

圧力:160 tchamfer 長さ:3050 mm柱間の距離:2550 mmテーブル幅:220 mmコラムアーム:280 mm日光:440 mm作業ストローク:最大250 mm総電力要件:22 kW機械の重量約:13 t-Hubgeschw。/ストロークの速度:abwärts:ダウン、90 mm / s-押し下げ11 mm / s-アウフ。/上向き:90 mm / s-スペズ/仕様:2-Hand/Fuss-Bedienung / 2 –ハンドフットスイッチこの広告のデータは、LogoTec h oHGのソフトウェアソリューションであるModulMWSを使� �して作成されました�

pressure: 180 tchamfer lenght: 3050 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 150 mmreturn speed: 65 mm/secajustment speed: 50 mm/secwork height max.: 1010 mmoil volume: 150 ltotal power requirement: 11 kWweight of the machine ca.: 9500 kgdimensions: 3100 x 1750 x 2850 mmFurnishing:- DELEM CNC control DA65- controlled axes: Y1 + Y2 + X + R- Electric crowning device WILA, controlled via CNC- Electric back stop, travel range 600 mm- hydr. Upper tool holder WILA- hydr. WILA lower tool holder- front laser protection device FIESSLER- 5x manually adjustable stop fingers, foldable- 2x front support arms sliding system”- side + back protection device- Hand and foot controls- Operation manual?The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

圧力:35 t面取り 長さ:2000 mm機械の重量 約:3 t総電力要件:kW コラム間の距離:mm機械の寸法 約:m圧力 35to最大曲げ長さ 2000mmアレスタ 背後駆動容量 4,5 kW重量 3000kg

圧力:50トン面取り長さ:2100mmスロート:420mmストローク :200mm機械重量ab.:4.000kg

pressure: 150 tchamfer lenght: 4300 mmdistance between columns: 3700 mmram stroke speed: 100 mm/secworking feed: 8 mm/secreturn speed: 80 mm/secstroke: 175 mmtable height: 920 mmControl: DELEM DA 52 total power requirement: 11 kWweight of the machine ca.: 15000 kgdimensions of the machine ca.: 4800 x 1700 x 2850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 105 tchamfer lenght: 3100 mmdistance between columns: 2600 mmtable width: 100 mmtable height: 750 mmControl: DELEM DA 65 dayligth: 200 mmworking feed: 0 - 10 mm/secreturn speed: 0-100 mm/secrapid traverse - up: max. 100 mm/secvoltage: 380 V / 50 Hztotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4 x 2,2 x 2,8 mEquipment:• CNC-control DELEM DA65 graphic video• manual back-off turning• upper and lower tool• 2 manual control / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

プレス容量:2250kN油量:400リットルDNC 1200PS エコ/コール機械重量約15.500kg

pressure: 400 tchamfer lenght: 4000 mmdistance between columns: 3500 mmControl: CNC type: BC 25 Graphicthroat: 400 mmtotal power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

圧力:150 t面取り長さ:3550 mm列間の距離:3050 mm制御:Cybelec DNC 880S ストローク:700 mmスロート:350 mm寸法:4400x2200x3940 mm機械の重量約:15.000 kg付属品/機器:-機械の前の曲げ補助具-曲げ補助具の� ��車スペース-3ストップフィンガー-制御変換2011

pressure: 110 tchamfer lenght: 2550 mmControl: Cybelec CybTouch 15 weight: 9000 kgdimensions: 3000 x 2100 x 3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: . mmControl: CNC type: DA 65 R stroke: 200 mmsafety distance: 136 mmrapid traverse - down: 100 mm/secrapid traverse - up: 92 mm/secworking feed: 1-10 mm/secthroat: mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

圧力:320 t面取り長さ:4100 mm:600:250:2900 mm ストローク:265 mm スロート:400 mm 柱間距離:3750 mm デイライト:550 mm テーブル幅:60 mm オイル量:600 L重量:29.000 kg

圧力:200 t面取り長さ:3050 mm 柱間距離:2550 mm コントロール:CYBELEC VisiTouch Pac ラムストローク:524 mm機械の重量:約17.000 kg

pressure: 100 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 250 mmstroke: 200 mmadjustment of press crosshead: 200 mmstroke speed - idle stroke downwards: 105 mm/secstroke speed - idle stroke upwards: 180 mm/secstroke speed - under load: 9,5 mm/sectable width: 200 mmtable height over floor: 900 mmdayligth: 280 - 480 mmback stop - adjustable: 3 - 729 mmcontrol: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kWweight of the machine ca.: 10 tdimensions of machine L x W x H: 3,70 x 2,45 x 2,80 mAccessories: programmable back gauge, table extensions, various upper and lower dies segmentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2050 mmcontrol: CYBELEC DNC 880S weight: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

圧力:320 t曲げ長さ:4000 mmスタンド幅:mm総電力要件:kW機械重量約:25 tスペース要件約:mブランド:LVDタイプ:PPEB 320 / 40 CNCブランド:モリスCNCモデル:ソリューションESA 630建設年:1990油圧容量:320 T曲げ長さ:4,000mmMulti-V + Jナイフ制御バックゲージX + R1セットの工具付き機械重量:25,000 kg機械は床に平らに立っていますこの広告のデータ� �、LogoTech oHGのマシン管理であるModulMWSで作成されました�

圧力:140 t 曲げ長さ:3000 mm スタンド幅:mm 総電力要件:kW 機械重量 約:tスペース要件 約: mベアリング数2010012機械の種類 承認プレスCOLLYタイプを作る 3000/140 建設年 NB曲げ長さ 3000 mm プッシュ 140トンストローク 250 mm 投影 310 mm 設置高さ 520mm 追加情報 1セット 工具 1セットこの広告のデータは、LogoTech oHGのマシン管理であるModulMWSで作成されました�