旋盤 中古 販売のため (3,114)

Lead and pull spindle lathe - 4-jaw chuck 200mm - Multifix steel bracket size B - Foot brake - Chip tray Turning diameter over bed 420 mm Turning diameter over support 290 mm Turning length 900 mm Speed 40 - 2000 rpm Tip height 210 mm Spindle bore 38 mm Total power requirement 4.0 KW Machine weight approx. 0.9 t Space requirement approx. 2.4 x 1.1 x 1.3 m Condition: unchecked (6) Auction-ID: A7-46460-499

旋回直径:5-42mm 旋回長:3200mm 制御:トラウブ TX8i x軸:50mmz軸:50mm 総動力要求:kW 機械の重量 約:4000 kg 機械の寸法 約:m この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Rotating center punch Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-442

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-514

旋盤直径:1.320 mm 旋盤長:5000 mm スイング直径:1250 mm ワークピースの重量:14 スライド上の旋盤直径:900 - 950 mm、総電力要求:45 kW 機械の重量 約:18 t本広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

Lead and pull spindle lathe Three-jaw chuck 200mm Multifix Steel Bracket Size B 3 Multifix cassettes Emergency Stop Facility Turning diameter over bed 370 mm Turning diameter over support 200 mm Turning length 1000 mm Center height 185 mm Spindle bore 56 mm Tailstock quill holder MK 4 Speed 50 - 2000 rpm Drive power 4.0 kW Machine weight approx. 1.4 t Dimensions approx. 2.3 x 1.1 x 1.3 m Auction-ID: A7-46460-403

Lathes with: - Digital display - Quick-release steel holder - 3-jaw chuck 200mm and 160mm - Chip tray - Centering tip Turning diameter over bed 460 mm Turning diameter over support 280 mm Turning length 1000 mm Center height 230 mm Circumferential diameter in offset 720 mm Spindle bore 53 mm Spindle speeds 28 - 1250 rpm Total power requirement 4.0 kW Machine weight approx. 1.8 t Dimensions approx. 2.4 x 1.4 x 1.75 mm Auction-ID: A7-46460-450

Guide and tension spindle lathe machine - With photocopying device - 3-jaw chuck 200mm - 2 Mutifix quick-change steel holders - Moving center punch - Machine light - Chip tray Turning diameter over bed 410 mm Turning diameter over support 260 mm Turning length 1000 mm Turning diameter in the offset mm Speed 40 - 2000 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 4.5 KW Machine weight approx. 1.6 t Dimensions approx. 2.4 x 1.3 x 1.5 m Auction-ID: A7-46460-510

3-jaw chuck 200mm 4-fold steel holder Turning diameter 350mm Turning diameter via support 210 in offset 500mm Turning length 1000mm Speed 20 - 1400rpm Spindle bore 36mm Motor 2.0 KW Weight 600Kg Dimensions 2.2 x 1.0 x 1.5m Auction-ID: A7-46460-493

Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-498

Lathes with: - 4-fold steel holder - 3-jaw chuck 315mm - Centering tip Turning diameter over bed 500 mm Turning diameter over support 320 mm Turning length 2100 mm Center height 250 mm Spindle bore 60 mm Spindle speeds 11 - 2000 rpm Total power requirement 7.0 kW Machine weight approx. 2.9 t Dimensions approx. 4.3 x 1.2 x 1.3 mm Auction-ID: A7-46460-438

Lead and pull spindle lathe - 4-jaw chuck 315mm - Multifix steel bracket size B - Feed in upper support - Bezel - Machine feet - Chip tray Turning diameter over bed 520 mm Turning diameter over support 260 mm Turning length 1600 mm Speed 14 - 710 rpm Tip height 260 mm Spindle bore 60 mm Total power requirement 11.0 KW Machine weight approx. 2.9 t Space requirement approx. 4.0 x 1.4 x 1.6 m Auction-ID: A7-46460-484

ベッドでの旋回直径:340mm スライドレストでの旋回直径:177mm 回転長:630mm、スピンドル回転速度:無段差:55-3000 U/機械の最小重量約1.55 機械の寸法 約2×1×1.6 mデジタル表示 HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

旋盤直径:600 mm 旋回長:1250 mm 制御:シーメンス840D ラジアルフェイススライド移動:320 mm 回転速度範囲:5-3.000 U/min 工具数:8 スタンド:冷却材装置とチップコンベヤー:総消費電� �:42 kva 機械重量 約5.5 機械の寸法 約3.6×2,15×1.95 mこの広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

turning diameter: 400 mmturning length: 635 mmcontrol: Heidenhain Eltropilot greates pass round over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmdrive of main spindle: 21 kWmax. torque on the spindle: 240 Nmmain spindle speeds:: 25-5.000 turning speed range - C-axis: 100 U/minworkpiece system 12-station turret head: feed power in the axis x + z: 3,5 / 7 Nrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mincoolant device with chip conveyor: total power requirement: 44 kvaweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 60660 €: 1146.47 €: 630 mm: 2000 mm: 315 mm: 103 mm: 430 mm: 400 mm: 11 : 120 MK: 3 : 16 - 63, 63 - 250, 315 - U/Min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 060 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3310 kgdriven by variable speed control (2 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 315 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 57 710,00 turning length1.500 mm € 58 850,00 turning length3.000 mm ...

\"Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chucklead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version.Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the supportTurning length approx. 1,200 mm.Condition:Used machine with age-related signs of use.Visually appropriate to the age.Manufacturer: Gebr. Boehringer GmbHType: Lead and pull spindle latheTurning length: approx. 1,200 mmChuck diameter: Ø 475 mmSpindle bore: approx. 80 mm• Dimensions in mm (LxWxH)approx. 3,450 x 1,300 x 1,700 mm\" Auction-ID: A7-46417-373

faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/minturning speeds: 1) 0,7 - 5,6 U/minturning speeds: 2) 2,8 - 22,4 U/minturning speeds: 2,1 - 56 U/mintool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 815 mmturning length: 3000 mmcontrol: ECS 2402 swing over bed: 815 mmcentre distance: 3000 mmswing diameter over slide rest: 485 mmspindle bore: 137 mmspindle turning speed range: 1200 U/minrapid traverse: 5 m/minspindle motor: 28 kWtailstock quill diameter: 115 mmtailstock quill stroke: 250 mmtotal power requirement: 30 kWweight of the machine ca.: 7,0 tdimensions of the machine ca.: 5,87 x 2,10 x 2,10 mEquipment: CNC-control E.C.S. 2402 3-jaw chuck 4-jaw faceplate, diameter 700 mm 4-jaw faceplate, diameter 400 mm 3 Steady rests Chip ConveyorWithout boring bar holder and boring bar.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-46309-26

Auction-ID: A7-46309-31

旋盤直径:330mm、旋盤長:650mm、回転速度(無段差):30-5000 U/mindleテーパー:ASA A2-5 制御:FANUC 18i-T 本広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 340 mmturning length: 575 mmswing dia.: 500 mmX-Axis movement: 215 mmY-Axis movement: 100 mmZ-Axis movement: 605 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 15/11 kWspindle bore diameter: 76 mmbar capacity: 65 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 7,5 kWspindle bore: 53 mmspindle distance: 575 mmtotal power requirement: 26,9 kVAWeight: 4,8 tdimensions of the machine ca.: 2,7 x 1,7 x 1,75 m- Mazatrol SmoothG CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis-- Turning Speed: 4500 U/min, 5,5kW- 3-jaw chuck-- Main: 8-- Counter: 6- Chip conveyor- Coolant system- ...

turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

中心高度:450 mm中心距離:6150mm スピンドルボア:140mm ベッドで旋盤直径:900mm スライド間で旋盤直径:660 mm スピンドルドライブ:15 kW 外部寸法:ブライト 1750mm 長さ:9000 mm 高さ:1650 mm 重量:8000 kg スピンドル回転数:: 11-500 UpM チャック、コレット、フェイスプレート この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

bar material dia.: 32/38 mmspindle passage: 44 mmturning length: 320 mmturning speeds: 200-8000 U/minc-axis: 0,001 Gradgripping station: 32/38 mmturning length: 120 mmturning speeds: 200-8000 U/minc-axis: 0,001 0number of tools: 13 fixnumber of milling stations: 4+5 drivencontrol: Mitsubishi Meldas M70 Number of axles: 5+2 St.total power requirement: 7,5 kWweight of the machine ca.: 2850 kgdimensions of the machine ca.: 2,5 x 1,4 x 1,75 + FMB mbar loader: FMB turbo 3-36 fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloaderFMB turbo 3-36equipped with swarf & coolant tank, fire distiguisher.ON/OFF 29.564h (status 24.03.2026)Running hours 26.607h (status 24.03.2026)GBL function (standard)LFV function: noThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 410 mmturning length: 800 mmcontrol: Sinumerik 840 D ERGOLine Siemensgreates pass round over bed: 700 mmmax. turning diameter: 410 mmtravel -x axis: 300 mmtravel -z axis: 850 mmturning speed range - spindle: max. 4.000 U/minchucking diameter: 260 mmspindle bearing diameter: 130 mmpower capacity: 40% ED = 34 kWpower capacity: 100 % ED = 25 kWmax. Torque: 280 NmC-Axis: 0,01 °turret (x-stations): 12 tool taper: DIN 69880 / 40mm driven statition: 6 posSpindle speed driven tools: ~ 4.000 min -1power capacity - driven tools: 40% ED = 11,3 kWpower capacity - driven tools: 100 % ED = 5,6 kWrapid traverse ( X / Y / Z ): 30 m/minTailstock:: tailstock adjustment: 800 mmmorse taper: MK 5 total power requirement: 65 kVAweight of the machine ca.: 6,2 tdimensions of the machine ca.: 5,5 x 3,0 x 2,5 mChip conveyor: Tool drive mechanisum: Tailstock: Three Jaw Chuck: Schunk THW Plu ...

: neu : Bulgarien : 55100 €: 1041.39 €: 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: 120 : 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3600 mm: 1500 mm: 1650 mm: 3110 kgIn contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.driven by variable speed control (3 steps)3-axes digital readout Fagor with CSS (constant surface speed)quick change toolp ...

旋盤直径:340mm 回転長:1000mm 制御:Mazatrol SmoothC 総動力要求:機械のkW重量 ca.: 機械のt次元約:mこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�