コード 61078 概要 ラジアルボール盤 ベルゴンジを作る モデルF 32 / 1000 シリアル番号 F 00 - 592 1991年(新として) 鋼鉄容量 60 35 mm 鋳鉄の容量 26 45 mm スピンドルテーパMC 4 スピンドル半径 (最大) 1100ミリメートル 最小/最大高さスピンドル/ベースプラットの上部330 / 1030 mm アームトラバース 500 mm スピンドルトラバース 220 mm 速度数 12 ステップ 速度範囲 60 – 1300 rpm 送り範囲 0,06 – 0,12 – 0,22 mm/rev. 作業面ベースプレート 1070 x 515 mm ベースプレート 1600 x 600 mm モーター 2,5 キロワット – 380 ボルト 総電力 3 キロワット 寸法 1600 x 600 x 1950 (2400) mm (長さ x 幅 x 高さ) 機械重量1300キロ アクセサリークーラント ボックス: 450 x 550 x 500 mm 条件機 ...
鋼材中のボア容量(直径):28 mm、アーム長:700 mm ワークピース高さ最大:1300 mm 工具テーパー:MK3 送り回数:0,1-0,3 mm/Uスピンドル回転速度範囲:100-1.220 U/最小電力要求:1.4 kW 機械の重量 約:1.3 機械の寸法 約:LBH 1.8 x 0.8 x 2.3 m(含む)キューブ表(含む)掘削フィード機械式クラン この広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
bore capacity in steel (diameter): 50 mmarm length: 1.600 mmworkpiece height max.: 1.200 mmdistance spindle/base plate: 320 - 1.220 mmspindle taper MT: 5 quill stroke: 315 mmthroat min.: 350 mmthroat max.: 1.600 mmquill feed: 0,04 - 3,20 mm/Udrive capacity - spindle motor: 4,0 kWspindle turning speed range: 25 - 2.000 U/mincolumn diameter: 350 mmvoltage: 400 Vtotal power requirement: 6,5 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,45 x 1,00 x 2,65 m- Serial-No.: 4045935- Clamping cube 630 x 500 x 500 mm- Coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmarm length: 1600 mmbore capacity in cast iron: 60 mmspindle diameter: 85 mmquill stroke: mmtool taper: MK 5 speeds: 24 - 1050 U/minfeeds: 0,06 - 1,0 mm/Ucolumn diameter: 345 mmvertical adjustment of the arm: 900 mmthread cutting attachment: ja Boring motor: 5,5 kwtotal power requirement: 7,5 kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: 2,5 x 1,0 x 2,99 mRadial drilling machine- Mounting cube 750 x 500 x 500 mm- Digital display for boom travel- Coolant system- Good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
VR 4A/1250 プロデューサー・マス 最大掘削直径 50 mm 最大垂直アーム調整750ミリメートル スピンドル4モールスのテーパ 主電動機出力 4kW 寸法 l x w x h 2250x1055x2970 mm 機械重量2700キ
bore capacity in steel (diameter): 62 mmarm length: 350-1600 mmworkpiece height max.: 1250 mmdistance spindle nose and table: 350-1250 mmBoring depth max.: 315 mmmachine table: 2400 x 1000 x 200 mmTurning speeds of the bor. spindle: 38 - 2000 U / minspindle taper: MT5 feed: 0,06 - 1,00 mm/Uengine output: 4 kWstroke drive: 1,5 kWoil pump: 0,75 kWtotal power requirement: 6 kWweight of the machine ca.: 3,8 tdimensions of the machine ca.: 2490 x 1050 x 2780 mmSteps of spindle speed: step-lessSteps of spindle feed: 8Speed of the arm up and down: 1.2 m/minArm moving angle: ±180 degreeSpindle moving distance of each dial revolution: 122 mmMax. spindle torque: 400 NmMax. spindle feed resistance: 16000 NThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
コレットとエンゲルハルトからの使用、よく保存さ たラジアルボール盤/ボイラーラジアル、タイプBUV 1000 ヘッドは回転して回転させることができます。機械 完全に可動です。 仕様 スピンドルホルダー 4 MK 掘削能力約40mm 約アンロード 900ミリメートル 寸法長さ x 幅 高さ 約 2100 x 1000 x 2500 mm 重量約 2500キ
スタンコ 2M55 Mk5 ドリリングスピンドル(モールス)での入管:Mk5 最大掘削能力:50mm ベース寸法(1) テーブルディム(2) : 1650 x 830 mm 縦方向ドリリングヘッド(X軸):1375 mm 高さトラベルアーム(Y軸):1200 mm 最大直径円柱 -- 穴開けスピンドル:1600 mm 回転数:20 - > 2000rpm スピンドルの出力:4.5 kW 冷却システム:4.7ト
ラジアルドリル マス VR5A プロジェクション1600ミリメートル 直径。スチール製50mm 直径。鋳鉄60mmで スチールM30のスレッド 鋳鉄M42のねじ MT 4 スピンドルモーター 4 kW - 28 - 2500 rpm 表 - スピンドルノーズ 1600 mm 表 1800 x 1000 重量 3.7 トー
スタンコ 2K52 掘削スピンドル (モールス) での入場: Mk3 ベース寸法 (1) テーブル寸法 (2) : 1.120 × 550 mm 縦方向の移動量のドリルヘッド(X軸):500 mm 喉の深さ: 800 mm 速度:63 tot~1.600 rpm 高さ: 1900 mm 重量: 900 mm 付属品:2000 mm 冷却システム:1620 kg クランプシステム:は
bore capacity in steel (diameter): 80 mmarm length: 2000 mmworkpiece height max.: ca. 1300 mmborehole diameter: in Stahl 80 mmborehole diameter: in Guss 100 mmthreading in St 60: M 68 mmspindle turning speed range: 16 - 1250 U/minSpindle Speed: 32 Stückspindle bore diameter / taper: 110 mm / MK 5 spindle stroke: 550 mmnumber of feeds: 18 feed: 0,06 - 3,0 mm/Udistance spindle/base plate: 480 bis 1800 mmcolumn diameter: 500 mmspindle drive: 11 kWstroke drive: 4 kWtotal power requirement: 15 kWweight of the machine ca.: 8500 kgbase area: 3190 x 1250 x 3600 mmwith work table 1200 x 1200 x 720 mm, weight approx. 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bohrleistung in Stahl (-Ø: 45 mmthroat: 1250 mmworkpiece height max.: 1100 mmswival range +/-: 360 °height adjustment: 745 mmbase plate surface area: 1450 x 920 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mmmax. torque on the spindle: 250 Nmfeed power: 14000 Nturning speed range: 20 - 1200 U/minfeed range: 0,063 - 0,63 mm/Udrilling capacity steel/cast iron: mmpower capacity: 3,7 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 60,0 mmarm length: 350 - 1.600 mmworkpiece height max.: 665 x 1.250 mmturning speeds: 38 - 2.000 U/minspindle taper MT: 5 MKbase plate: 960 x 1.760 mmthreading: 42 Mquill stroke: 325 mmtotal power requirement: 4,0 kWweight of the machine ca.: 3.800 kg.range L-W-H: 2.600 x 1.100 x 2.770 mmscope of delivery :- Cube table- Drill chuck arbor MK 5 / B 16- Reducing sleeves MK 5/4, MK 4/3, MK3 / 2- LED machine light- First filling with Shell Tellus 46- coolant device- Frequency converter- Digital speed display- lift motor- hydraulic motor- Height-adjustable protective cover- operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 55 mmarm length: 2005 mmworkpiece height max.: 1500 mmtable-size: 1500 x 800 mmspindle taper MT: 5 spindle turning speed range: 30-1200 U/minfeed range: 0,06 - 1,0 mm/Ucrossrail adjustment horizontal: 495 - 2.000 mmcrossrail adjustment vertical: 505 - 1670 mmspindle stroke: 310 mmcolumn diameter: 360 mmdistance spindle/base plate: 825 - 1670 mmpower requirement: 4,4 kWvoltage: 400 Vtotal power requirement: 7,2 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,00 x 0,80 x 2,80 m- Pole-changing motor with 2 speeds- right / left rotation- machine light- Cube table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmarm length: 1000 mmworkpiece height max.: - mmtotal power requirement: 5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,4 x 1,2 x 3 mVertical movement not functionalNo. 4656Radial drilling machine MK 4 make OOYA, type RE 2 - 1300 AYear of manufacture 1978 Working area: MK 4 x 1000 x 660 mmSpindle holder MK 4Speed range 32 - 1655 min-1 ( 50 Hz )Space requirement approx. 1.2 x 2.4 mWeight approx. 3 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmarm length: 1000 mmworkpiece height max.: 1400 mmtotal power requirement: 6 kWweight of the machine ca.: 3.700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bohrleistung in Stahl (-Ø: 35 mmthroat: 1000 mmworkpiece height max.: 200 - 1400 mmheight adjustment: 745 mmbase plate surface area: 1200 x 930 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 4 bore spindle stroke: 350 mmturning speed range: 60 - 1850 U/minfeed range: 0,09 - 1 mm/Upower capacity: 3,7 kWweight of the machine ca.: 3,7 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 mCube table 800 x 800 x 650 mmCoolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 50 mm: 1275 mm: 1330 -: MK 5 bore depth: 270 mmspindle turning speed range: 44-1206 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmarm length: 1100 mmworkpiece height max.: ca. 1000 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 28 - 2500 U/minfeeds: 0,05 - 2 mm/Uquill stroke: 300 mmdistance basic plate - spindle nose: 630 - 1380 mmcrossrail adjustment vertical: 750 mmtotal power requirement: 6 kWweight of the machine ca.: 4 tdimensions of machine L x W x H: 2,74 x 1,14 x 2,59 mm- with thread cutting attachment -Accessories: box table 550 x 550 x 550 mm, vice, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MAS VR5A, Radial drill, 1500mm arm, MT 4, low price, Can be inspected under power in our warehouse, Arm : 1600mm, Weight : Weight 3,7 Ton, Spindelmotor: 4 kW - 28 - 2500 RPM, Clamiping area : 1800 x 1000, Max dia in steel : 50mm, Max dia in cast iron: 60mm, Max threading in steel : M30, Max threading in cast iron : M42, Distance table spindle nose : 1600 mm
bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: ca. 1150 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/minfeeds: 0,06 - 0,5 mm/Ucrossrail adjustment vertical: 620 mmcolumn diameter: 350 mmtotal power requirement: 7,7 kWweight of the machine ca.: 4,6 tdimensions of machine L x W x H: 2,53 x 1,15 x 2,82 mAccessories: swivelling box table, coolant- additional column guide at the end of arm -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 120 mmarm length: 2500 mmworkpiece height max.: ca. 1800 mmbore capacity in cast iron: 160 mmdrilling radial min./max.: 880 / 2825 mmthroat min.: 555 mmcolumn diameter: 650 mmbore spindle diameter /taper: 90 / MK 6 mmdiameter of quill: 160 mmbore spindle turning speed range: 10 - 660 U/minbore depth: 650 mmfeeds: 0,07 - 3,0 mm/Udistance spindle/base plate: min. 300 / max. 2100 mmvertical adjustment of the arm: 1150 mmbase plate surface area: 3000 x 1550 mmtotal height of machine: 4500 mmtotal power requirement: 15 kWweight of the machine ca.: 16 t- right-/left spindle run- thread cutting deviceAccessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: ca. 1150 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 25 - 2000 U/minfeeds: 0,06 - 0,5 mm/Ucrossrail adjustment vertical: 620 mmcolumn diameter: 350 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,6 tdimensions of machine L x W x H: 2,50 x 1,08 x 2,50 mAccessories: box table 1100 x 700 x 550 mm, coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 45 mmarm length: 325 / 1000 mmworkpiece height max.: ca. 1000 mmspindle taper MT: 4 spindle turning speed range: 40 - 1700 U/minfeeds: 0,125 - 1,25 mm/Udistance spindle/base plate: 385 / 1400 mmquill stroke: 325 mmcrossrail adjustment vertical: 700 mm: 360 °boring head horiz. adjustable: 675 mmbase plate surface area: 1300 x 800 mmtotal power requirement: 6,2 kWweight of the machine ca.: 3,8 t- autom. feed- right-/left spindle runAccessories: box table 1000 x 750 x 500 mm, hydr. vice, width of jaws 200 mm, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bohrleistung in Stahl (-Ø: 45 mmthroat: 1250 mmworkpiece height max.: 1100 mmswival range +/-: 360 °height adjustment: 745 mmbase plate surface area: 1450 x 920 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mmmax. torque on the spindle: 250 Nmfeed power: 14000 Nturning speed range: 20 - 1200 U/minfeed range: 0,063 - 0,63 mm/Upower capacity: 3,7 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bohrleistung in Stahl (-Ø: 50 mmthroat: 1500 mmworkpiece height max.: 1380 mmBohrleistung in Guß (-Ø: 60 mmAbstand Spindelmitte bis Säule: 320 - 1250 mmswival range +/-: 180 °base plate surface area: 2640 x 1000 mmmax. torque on the spindle: 310 NmBohrspindel-Ø/ Aufnahme: 75 mm /MK 5 bore spindle stroke: 310 mmspindle turning speed range: 28 - 2500 U/minfeed:: 0,05 - 2 mm/Upower capacity: 4 kWweight of the machine ca.: 4,3 tcube table 500 x 500 x 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
鋼の掘削能力(直径):50ミリメートル投影:1500ミリメー トルワークピースの高さ - 最大:ミリメートル総電力要件:キロワット機械重量 :tスペース要件約:mベアリング数1610008機械の種類ラ アルボール盤MASタイプVO 50穴あけホルダーMK 5穴あけ能力50ミリメートルフィート寸法1820x 986ミリメートル(rpm)の速度 28 - 2500 フィード (mm/U) 0.5 - 2長さ (mm) 3250 幅 (mm) 1120 高さ (mm) 3396重量 4550データfü、このリストはModulMWSで作成されまし - LogoTech oHGのマシン管理
