サブカテゴリ
(第3カテゴリーレベル)
生産者：
(カテゴリ： 402)
Compact tray sealer with rotary table, This sealer by UK manufacturer Packaging Automation (PA) works with a rotary table: you place the trays in the tool at the front, the table turns them under the sealing head and the sealed trays come back to the front. The fitted tooling takes two trays per cycle. Film runs from the reel at the side., The control panel reads 182/5. We did not find a legible rating plate with the year of manufacture. The machine stands on castors., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/packaging-automation-rotary-tray-sealer /, Type: Rotary tray sealer, Tooling: 2 trays per cycle, Controls: Text display with function keys, Construction: Stainless steel, base on castors
Conveyorized chamber vacuum packaging machine for industrial food processing, This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vc999-k ...
Closes bags with a strip of tape around the neck, The SBS FlexSeal closes bags, for example of bread, vegetables or fruit, by applying a strip of tape around the twisted neck. You hold the bag against the brushes, which draw in and twist the neck; the machine then wraps a piece of tape around it and cuts it off automatically., It is operated from an Allen-Bradley touchscreen and stands on a base with castors. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/sbs-flexseal-bag-closer-with-tape/, Type: Bag closer with tape, Infeed: Two brushes that draw in and twist the bag neck, Controls: Allen-Bradley touchscreen, Construction: Stainless steel, on castors
Closes bags automatically in line, The Leximat ASM 60 takes over the neck of filled bags with guide belts, twists it together and closes it, with no operator needed at the machine. That makes it a good fit behind a weigher or filler for bread, vegetables, fruit or other bagged goods., The machine is built entirely in stainless steel with a guard over the closing section and is operated from a touchscreen. Servo drives control the movements. We did not find a rating plate with the year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/leximat-asm-60-automatic-bag-closer/, Type: Automatic bag closer (in line), Drive: Servo motors, Controls: Touchscreen, Construction: Stainless steel, with guard over the closing section
Tray sealer that closes pre-formed trays with film, The Meca Plastic S3000 is a tray sealer: you place pre-formed trays with product in the tooling, the machine brings them under the sealing head and seals a top film onto them. The machine has a touchscreen with Dutch menus where the sealing temperature, pressure and speed are set per programme., The tooling fitted takes two trays per cycle; tooling is matched to the tray size, so a different tray needs different tooling. The machine was built by Meca Plastic in Pouzauges, France. The type plate is there, but the filled-in fields are no longer legible, so year and serial number are not known., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/meca-plastic-s3000-tray-sealer/, Type: Tray sealer, Controls: Touchscreen with programmes, Dutch me ...
2011 Sealpac A6 tray sealer with triple mould – used, in good working condition, This Sealpac A6 is a tray sealer built in 2011 by Sealpac GmbH in Oldenburg, a German manufacturer known for its packaging machinery for the food industry. The machine is fitted with a triple mould of approximately 185 x 280 mm and a walking beam infeed, which moves trays step by step and stably towards the sealing stations. According to the manufacturer, the A6 reaches a capacity of up to 90 packs per minute, depending on tray type and application. The construction is in stainless steel and the machine is in good working condition., Located in Emmeloord, the Netherlands. Available immediately – price on request., More photos and full details on our : [stcfoodsolutions.nl/en/machine/sealpac-a6](stcfoodsolutions.nl/en/mac hine/sealpac-a6/), Machine type: Tray sealer, Mould: 3 tray tooling, approx. 185 x 2 ...
2018 Italian Pack inline traysealer – pre-owned, Compact inline traysealer for fresh products., This 2018 Italian Pack traysealer seals trays with top film and is built as an inline machine with infeed and outfeed conveyor. It comes complete with a vacuum pump and several tool sets, and is suitable for MAP packaging depending on the configuration., Key features, - Inline version: infeed and outfeed conveyor with guards, ready to run in a packaging line, - Stainless steel construction: suited to hygienic food production environments, - PLC control with touchscreen: simple operation and programmable settings, - Automatic film feed: reel holder for top film above the sealing unit, - Vacuum pump fitted: suitable for MAP packaging, depending on the configuration, - Compact footprint: fits smaller production rooms as well, Tooling included, The machine comes with a set of tools for different ...
Webomatic CL-C 950 chamber belt vacuum packaging machine – condition: as new, The CL-C 950 is the entry-level model within the WEBOMATIC CleanDesign range and enables fully automatic bag packing with very little manual work. The patented Roll-Back-Lid allows the inside of the lid to be cleaned quickly and thoroughly without exposing the conveyor belt to cleaning fluids., Key features, - Chamber of 1,050 × 850 × 285 mm (l × w × h), suitable for large pouches, - 950 mm seal bar across the full width, - Conveyor belt for automatic product feed-through, - Patented Roll-Back-Lid for fast and thorough cleaning, - Mitsubishi PLC with colour touchscreen, - WEBOMATIC CleanDesign construction, Applications, - Meat and meat products, - Fish and seafood, - Cheese and dairy, - Ready meals, - Medium to large batch production, Located in Emmeloord, the Netherlands. Available immediately – price ...
VC999 single-chamber vacuum packaging machine – pre-owned, Mobile single-chamber vacuum machine from VC999 (Inauen Maschinen AG, Herisau, Switzerland), stainless steel floor model on castors with an oil-lubricated VACFOX rotary vane pump., Key features, - One spacious vacuum chamber with a raised filling plate to set the product height, - Seal bar across the full chamber width, suitable for bags up to the full width of the chamber, - Oil-lubricated VACFOX rotary vane pump: deep final vacuum and a long service life, - Mobile floor model on castors, easy to move around the production floor, - All-stainless housing, built to take daily cleaning, - Digital control with programme memory: vacuum, seal and venting times stored per product, Applications, - Meat and cured meats, - Fish and seafood, - Cheese and dairy, - Ready meals, - Butchers, fish processors and foodservice, Benefits, - Exten ...
Henkovac vacuum packers, brand-new 2023 models available from stock., Advertised in the photos, Henkovac M4, Henkovac M6, Henkovac D1, Henkovac D4, All models are equipped with upgraded vacuum pumps for more performance, sensor control, filling plates, soft-air., Contact us for more specific information and photos.
Proseal PR30, Very simple compact traysealer with a high output with its rotating table system., Have a look at the video for an impression., More photos and full specifications: stcfoodsolutions.nl/en/machine/proseal-pr30-tray-sealer/
Record Scorpion MEC. SP., Compact good condition flow packer., Key features, - New condition, - Very compact compared to most other flowpackers, Only ±290 cm long, very easy to integrate., - Bottom seal, - Very easy to set-up and run, Optionally with additional infeed device., More photos and full specifications: stcfoodsolutions.nl/en/machine/2007-record-scorpion-compact-flowpacker /
For Sale: Multivac T700 Automatic Traysealer – Excellent Condition, We are offering a pre‑owned Multivac T700 Traysealer, ideal for food producers, packaging businesses, and industrial applications. This reliable and versatile machine is in very good working condition and ready to go straight into production., Key Features & Highlights:, - Automatic tray sealing machine designed for high‑volume industrial packaging., - Suitable for sealing trays made of plastic, aluminum, cardboard, and foam with a wide range of sealing films., - Robust stainless steel construction for durability and hygiene., - User‑friendly operation with quick tool change‑over., - Can be used for standard tray sealing and MAP, Specifications (approximate):, - Model: Multivac T700 Automatic Traysealer, - Condition: Used, in very good state, - Cycle speed: Up to ~20 cycles per minute (sealing only), WITH MAP d ...
Henkovac TPS 2000 Automatic Traysealer – Excellent Condition – In Stock (Netherlands), We offer a very clean and well-maintained Henkovac TPS 2000 traysealer, equipped with a powerful, 160 m³/h Busch vacuum pump, now available directly from stock at STC Food Solutions in Emmeloord, The Netherlands., This machine has been taken straight out of production, is in excellent working condition, and ready for immediate use., With 1/2 Gastro tooling; 325 x 265 (2x), ---------------------------------------------------------------, Key Features, - High-capacity automatic traysealer for MAP and vacuum packaging, - Equipped with integrated Busch vacuum pump (160 m³/h), - Dual mould system – seal two trays simultaneously for high throughput, - Suitable for a wide range of food products (meat, ready meals, vegetables, etc.), - Quick and easy mould change system, - Transparent cover for excelle ...
Henkovac T4 – Professional Vacuum Packaging Machine (2019), Reliable vacuum performance with robust build quality for food‑industry environments., The Henkovac T4 is a compact yet powerful tabletop vacuum packaging machine engineered for professional food processors, restaurants, butcheries, and commercial kitchens. Featuring a high‑quality pump and intuitive controls, the T4 delivers consistent vacuum sealing performance for a wide range of products., Technical Specifications, - Model: Henkovac T4 (Tabletop), - Year: 2019 (design generation from this period), - Vacuum Pump Capacity: 16 m³/h – reliable throughput for medium‑duty packaging operations, - Chamber Dimensions: approx. 530 × 590 × 460 mm, - Seal Bar Length: approx. 420 mm, - Weight: ~55 kg, - Standard Power: 220‑240 V, single phase, 50/60 Hz (other voltages on request), Key Features, - High ...
FOR SALE: Reepack ReeFlex 250 – Automatic Tray Sealer (2011), Description:, For sale: a Reepack ReeFlex 250 automatic tray sealer, a professional packaging machine designed for industrial food packaging lines. This machine is known for its high performance, flexibility, and robust construction, ensuring reliable and efficient production., The machine is in good condition., Tool sizes can be found in the photo album, they measure;, - 325 x 265, - 227 x 178, Key Features:, • Fully automatic in-line tray sealer, suitable for sealing trays with top film for retail and retail-ready packaging, • Twin chamber / dual mould system for increased output capacity, • Robust stainless steel (AISI 304) construction, suitable for hygienic food production environments, • PLC control with touchscreen interface for easy operation and programmable recipes, • Suitable for multiple packaging solut ...
オートモーションインフィードシステムを備えたPAND Aフローパッカーを記録し、現在入荷中、近日中に詳 細情報を提供します
Newtec 2013M、ダブルPCS(ポーションコレクションシステム)付 きニースコンディション計量器、この機械は1kgに使 されました。毎分約30ポーションの速度でポーショ ンポテト、PCSシステムは左右の両方を排出できます 、 STCはこの装置を取得したばかりです。現在、多くの しい在庫を受け取りましたが、まだ作業を行う時 が見つかりませんでした。もちろん、興味がある場 合は、テストと検査を優先することができます。 あなたが100%の作業条件のマシンを得ることを保証す るために、あなたが明らかに興味を持っている場合 、私たちがあなたのためにより多くの情報を収集 きるように、お気軽にお問い合わせください
HELICAP 23用中古のTETRA PAKキャップアプリケーター30 FLEX 2014年販売 アイテム#:USM-244 カテゴリキャップアプリケーター HELICAP 23用中古のTETRA PAKキャップアプリケーター30 FLEX 2014年販売 Tetra Pakキャップアプリケーター、Cap Flex 30 ヘリカップ23用、製造年2014年、バージョン300v、キャ ップフィーダー付き 状態:優
販売のための真新しいストローアプリケーター アイテム #: USM-206 カテゴリー:ストローアプリケーター 新品のストローアプリケーターが販売されています ストロータイプ:U字型と伸縮式 スピード:3000/6000/7500/9000 PLC:三菱 ホットメルト:ロボテック 保証:1年間の保証とスペアパーツセットが含まれて ま
販売中:Beck Packautomaten S2550XJ 2018年製造の自動包装機。 この機械は製品の自動フィルム包装用に設計されて ます。ドイツの著名なメーカーであるBeck Packautomaten GmbH & Co. KGのユニットで、シーメンスのHMIコントロールパネ を装備しています。 機械の詳細: ネブシュ D ウビオク N N H TCJWL ・製造元:ベック・パックオートマテン GmbH & Co. KG ・モデル/タイプ:S2550XJ ・製造年:2018年 ・運用時間:2,937時間 • 電圧:230/400V • 周波数:50 Hz • 電流:5 A • CE評価 ・コントロールパネル/シーメンスHMI ・自動フィルム包装システム 状態:中古で、技術的に非常に良好な状態です。 機械。機械の動作を展示したビデオもご要望に応じ ご覧いただけます。 購入者は輸送の ...
技術的パラメータ カテゴリ:中古の精肉機 衛生・包装・輸送サブカテゴリー パッカーの種類 高さ:1770 mm 幅960mm 全長:2320 mm 電源供給:400V 50Hz 3N 総出力:11 kW 主な素材はステンレススチール、耐酸性 サーモフォーマ包装システム 概要 フィルム幅:420mm、 金型寸法:180 mm x 180 mm、 ブッシュ真空ポンプ、容量:63 m³/h
MG2モデルG37N製のカプセル充填機を使用していました 。ニュー1986 カプセル充填機:#0、#1、#2にペレットを充填する(重 充填、圧縮なし)。 #0、#1、#2フォーマットおよび予備部品が含まれてい す。
MAF-RODAおよびGIRO製のリンゴの計量、分割、ポリエチ ン袋への包装に使用されたライン。 アップルの計量、分量、包装ラインは複数の部品で 成されており、それらを組み立てると一つのユニ トを形成します。 ライン構成要素: 1. 水卸みタンク。 2. 水卸しシュート。 3. 水上からの果物エレベーター。 4. 検査台。 5. ブラシドライヤー。 6. アップルフィードコンベヤー。 7. PDGシリーズの果物計量機。 8. ラベルプリンター付きのビニール袋包装ヘッド。 9. 回転テーブル。 10. 水循環ポンプ
中古包装機Trepko type 821。2020年版。 技術仕様: 容量:最大100パッケージ/分。 カッテージチーズ、バター、ラードを200gまたは250g キューブで包装できます。 出力:5.5 kW。 気圧:6バール。 体重:1,500 kg
グラインダー生産ラインのガラス瓶に入ったスパイ を使用しています。 カートン加工機 UNILINE AU-10-TA-R TF600x400x1500自動包装ラインは以下の通りです: 1. TA-Rハタ。 2.TF600x400x1500トンネル。 3. ユニライン包装ライン。 制御装置が入った制御キャビネット。 この機械は特定の製品のバルク包装生産のために設 ・製造されました。 パッケージ商品の種類: ・2x3のホイルトレイにリム付きのグラインダー。 •縁付きの2x2ホイルトレイにグラインダーを置く。 •2x3ホイルのグラインダー。 •2x2ホイルのグラインダー。 •2x3ホイルのグラインダー。 •2x3ホイルのグリルチューブ。 グリルチューブは2x2のホイルで。 シーラー 機械は以下の構成です: ・ ...
カッテージチーズ用の梱包機、タイプ:XPG-40。新2018 技術仕様: 容量:最大90パック/分 出力:2.2 kW 寸法:3030 x 2700 x 1800 重量:1600 kg インバーターでスムーズな速度制御とフォトセルを 載し、完全なオーバーホールを経て新品同様に使 ています。ほとんど使われていない。詰めたカッテ ージチーズ。コンベアもない。満席です
