板金加工 中古 販売のため (3,380)

sheet width: 3100 mmplate thickness: 6 mmrear stop: 1000 mmcutting angle: 1,2 °down holder: 14 Stkno. of strokes: 18 Hub/minoil volume: 150 ltotal power requirement: 11 kWdimensions of the machine ca.: 3900 x 1900 x 1600 mmweight: 5500 kg-----------------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-----------------------------------------------------------F urnishing:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max.travel, for longer cuts- 1x side stop- 2x front suppor ...

pressure: 28 tstroke: 180 mmtable-size: 300 x 550 mmdiameter of piston: 130 mmwork speed: min. 2 m/secwork speed: max. 9,8 m/secreturn speed: 20 mm/secMax. pressure: 200 barweight of the machine ca.: 0,65 ttotal power requirement: 4 kWdimensions of the machine ca.: 1,15 x 0,75 x 1,1 m• The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, theTool holder and are installed in the holes and pin holes.• The HB-28 model is used for light bending measurements on the work tableequipped with an angle scale, and the press can also be equipped with toolsare supplied (for example block punching) that are placed on the tool holderCan be assembled, as well as to ...

round bar steel: 45 mmsquare edge steel: 40 mmL-beam: 120 x 13 mmflat steel: 500 x 12 mmpunching pressure: 60 tthroat: 510 mm: 500 x 12 oder 400 x 16 mmpunch diameter: 27 in 17 mmpunch diameter: 39 in 12 mmoil volume: 80 ltotal power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 1,8 x 0,9 x 1,8 mHydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm².Electric 380 voltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 28 mmwall strength: 2 mmbending radius min.: 90 °Control: 3D TubeSoft Slim total power requirement: 3,5 kWweight of the machine ca.: - kgdimensions of the machine ca.: - mmDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5,0 tworkpiece diameter: 250 - 2500 mmtotal power requirement: 0,75 kWload capacity drive unit: max. 2500 kgload capacity rotating unit: max. 2500 kgweight of the machine ca.: 0,9 tThe self-adjusting D-HGZ roller blocks adapt to the differentDiameters of your workpieces yourself. This roller block is for specialdesigned for heavy-duty activities. Furthermore, this roller block is forSuitable for thin-walled workpieces, as the four wheels per unit are an improvedSupply pressure distribution. || Features: | - Electronic components ofTop quality | - Infinitely adjustable speed of the drive unit | -Wheels fitted with solid rubber tires enclosed in oneSteel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recoveryYour investment. | - The D-HGZ series is supplied as a standard version andincludes a remote control ...

sheet width: 3050 mmplate thickness: 6,0 mmdistance between columns: 3000 mmcutting angle: 0,5 - 3 °no. of strokes: 9 / 14 Hub/mindown holder: 18 total power requirement: 10 kWweight of the machine ca.: 4800 kgdimensions of the machine ca.: 3750 x 1600 x 1650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

シート幅:2500mm板厚:3mm柱間距離:2540mm総消費電力:9kW機 械の重量 約:5.5t機械寸法 約3.5×3.5×2mNo.5120スイベルベンディングマシン FASTI 212作業エリア:2500×3機械背面のシートサポート必要� �スペース 約4×4(2)×2m重量約5.7ト�

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 20 mmspeeds: 2850 U/minrange of angles: 0 - 60 (stufenlos) °weight of the machine ca.: 19,5 kgMaximum chamfer width 20 mm + face machiningDesigned for chamfering and deburring straight edges, for theso-called FACING - removing an unwanted layer of material on theFront side of the workpiece, which is created, for example, by flame cutting a sheet metal.Specially developed for the production of visible chamfers andweld preparations. Powerful electric drive for extremeCharges. High performance motor stepless adjustment of the working angle in the range of 0° - 60° FACING - Edge processing at an angle of 0° to remove unwanted onesLayers of material after flame cutting The unique mechanical scale to adjust the bevel width for higherprecision A very compact and ergonomic design for high work productivity Circumferential protective ...

シート幅:1015mmプレートの長さ:1015mmプレートの厚さ:6 ,0mmパンチ能力:25tパンチ直径:88,9mm総電力要件:16kW機� �の重量約:12000kg機械の寸法約:4000×2320×2300mm

plate thickness: 6 mmpressure: 12 tcutting range: Breite x Länge 200 mmno. of strokes: 15 Hub/mincutting angle: 30 - 140 °total power requirement: 4 kWweight of the machine ca.: 1,02 tdimensions of the machine ca.: 1065 x 900 x 1210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 230 tchamfer lenght: 5000 mmdistance between columns: 4050 mm: 800 mm: 500 mm: 300 mm: 600 mm: BC 45 Grafik : 18,7 kW: 22,0 t: 6,0 x 2,2 x 3,75 m- 4 stop fingers- Crowning device- Adjustment of the finger height manually via crank 140 mm- Groove in the front of the table- various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1000 mmworkpiece width - max.: 0,5 - 50 mmsandingbelt width: -- mmweight of the machine ca.: 2,5 tWith the SBM-L 1000 G1S2, which works in the dry process, in alternating operationSteel, stainless steel and aluminum can be machined. She deburrs and roundsthe edges on the outer and inner contours of punched, laser, fine plasma orwater jet cut workpieces with a thickness of up to 50 mmon both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatterand slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottomUnderside, process the sheets on both sides at the same time. hereAll edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces andedit twice. All pairs of aggregates can be switched on/off separately de ...

round bar steel: 50 mmsquare edge steel: 45 mmL-beam: 150 x 14 mmtotal power requirement: 4 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,3 x 1 x 2,1 mNo. 34185-fold combined profile steel shears with flat steel shearsPEDDINGHAUS 210 Super 16pressure capacity 80 toRound steel 50 mmSquare steel 45 mmangle steel 150 x 14 mmPunching up to 90 mm diameter5.5 HPSpace requirement 2.30 x 1.0 x 2.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

最大重量:5,0 tワーク直径:100 - 2500 mm総電力要件:2 x 0,37 kW負荷容量 駆動ユニット:最大2500 kg負荷容量 回転ユニット:最大2500 kgテーブル回転速度:100 - 1000 mm/min走行ホイールの直径:250 x 140 mm機械の重量約:0,9 tダブルフットペダル(スタートストップ/左右)リモコ ン(ケーブル上)を含�

圧力:32 tストローク:250 mmテーブルサイズ:500 x 760 mm最大ワーク高さ:925 mm曲げ速度:最大25 mm/秒タンク容量:80 l圧力電力:320 bar総電力要件:5,5 kW機械の重量約:0,8 t機械の寸法:1,3 x 0,5 x 1,3 m最大曲げ高さ:200 mm最大切断能力(St): 150×14最大打ち抜き能力(St)35ガイド高さ:200mm

round bar steel: 35 mmsquare edge steel: 32 mmL-beam: 120 x 12 mmflat steel: 400 x 16 / 200 x 20 mmpunching pressure: 60 tstroke: 10 - 27,5 mmthroat: 410 mmpunch diameter: 27 in 17 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2000 kgdimensions of the machine ca.: 1800 x 800 x 1800 mmHydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm².Electric 380 voltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table width: 3000 mmtable length: 1500 mmburner heads: 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERTwith extraction system PFC-4 Plus 4kW F3800The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 140 x 140 x 13 mmI-beam section - upend: 120 x 120 x 13 mmL-beam: 130 x 130 x 12 mmround bar steel: 85 mmbending capacity - flat iron: 125 25 mmflat steel: 65 x 65 mmincluding various rollers:Pipe Ø:219 mm (tool/roller Ø 535 mm)140 mm (tool/roller Ø 420 mm)273 mm (tool/roller Ø 520 mm)203mm168.3 mm (tool/roller Ø 500 mm)75 mm (tool/roller Ø 400 mm)49 mm (tool/roller Ø 420 mm)48.3 mm (tool/roller Ø 420 mm)22.5 mm (tool/roller Ø 420 mm)32/32.5 mm (tool/roller Ø 420 mm)60 mm (tool/roller Ø 420 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 3 mmspeeds: 3600 U/minrange of angles: 30 - 60 (stufenlos) °weight of the machine ca.: 31 kgdimensions of the machine ca.: 530 x 420 x 410 mmMaximum bevel width of 3 mm - Mechanically adjustable bevel angleDesigned for deburring and chamfering steel parts and workpieces.Processing of different materials. Solid and stablemachine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide- Number of indexable inserts: 5 pieces (four-sided)- Feed: manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm: 5,5 mm: 5,0 mmroll diameter: 130 / 195 mm: 2,2 kW: 1050 kg: 2150 x 900 x 1200 mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板厚:1.2mmロール径:62mmスロート:100mm機械の重量 約:50kg機械の寸法 約560×220×500mm

diameter: -- mmworkpiece length: -- mmwork piece width: 18 mmrange of angles: 15° - 50° °weight of the machine ca.: 110 kgChamfering system UZ18 HARDWORKERMaximum bevel width 18 mm with automatic feedThe UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on-site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient.For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can be easily a ...

圧力:26 tパンチングクロスカット(CMM):80 x 2,5 ストローク: - mm総電力要件:1,5 kW機械の重量 約:3 t機械の寸法 約:3 x 3 x 2,5 mNo.1096:リボルバーの穴あけパンチ26からEDEL、タイプS MO 26/660/12スロート深さ660 mm作業エリア:直径80 x 2.5 mm駆動力:1.5 kW付属品:12ステーションツールマガジン各種パンチ� �ダ�

angular steel - leg outwards: -- mmdouble T-iron on the x-axis: -- mmU-iron on the x-axis: -- mm: 50 mm: 150 mmthroat: 120 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,36 tdimensions of the machine ca.: 1,1 x 0,8 x 1,4 mExhibition machine NEW, year of construction: 2021The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel.The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine.- Manual adjustment of the top roller with a handwheel- Vertical and horizontal work possibility- 3 driven rollers- Supplied with a standard roller set- Foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

切断能力: - mmスロート: - mm丸型ブランク径 最大:500 mm丸型ブランク径 最小:? mm総消費電力:kW機械の重量 ca.:t機械の寸法 ca.:m

weight max.: 1200 kgworkpiece diameter: 20 - 800 mmtotal power requirement: 0,75 kWtraversing speed: 80 - 1600 mm/minweight of the machine ca.: 56 kgrange L-W-H: 520 x 470 x 390 mm- For machining cylindrical workpieces- Flat frame- Castors with polyurethane coating- Clear controls- Infinitely variable speed- The control electronics are of a robust and closed housingprotected- With foot switch for start/stop- Drive with DC electric motors and gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5000 kgworkpiece diameter: 250 - 2500 mmtotal power requirement: 0,75 kWtable turning speeds: 100 - 1000 mm/mindiameter of running wheel: 250 x 140 mmweight of the machine ca.: 800 kgrange L-W-H: 2200 x 2500 x 800 mm- For machining cylindrical workpieces- Flat frame- Castors with polyurethane coating- Clear controls- Infinitely variable speed- The control electronics are of a robust and closed housingprotected- With foot switch for start/stop- Drive with DC electric motors and gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 3 mmrear stop: 1000 mmdown holder: 18 Stkcutting angle: 0.5 - 1,0° 30° °oil volume: 150 ltotal power requirement: 5,5 kWweight: 4300 kgdimensions of the machine ca.: 3800 x 1950 x 1600 mmFurnishing:- electric back gauge 750 mm- front support plates with ball rollers- Light barrier behind the machine- Hydraulic cutting adjustment- Cutting gap regulation via handwheel- LED cutting edge lighting- 1x side stop with scale 1500 mm- 1x freely movable foot switch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 40 mmpre-bending: 32 diameter of upper rolls: 460 mmdiameter of lower rolls: 420 mmside roll diameter: 360 mmpower capacity: 30 kWmin. bending diameter: 1380 mmweight of the machine ca.: 30,1 tdimensions of the machine ca.: 6,3 x 2,3 x 2,6 m4 Rolls Hydraulic Bending MachineStandard Features:- hardened and polished rolls- complete body made of ST-52 steel- hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls- top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered- separate control panel- oil cooler - conic bending- in accordance to CE-norm- Warranty 12 monthsOptional Accessories:- variable speed of rotation (5.858,00 Euro)- material feeding table (5.100,00 Euro)- center support (18.750,00 Euro)- 2 x side supports (15.000,00 Euro)The data for this ad  ...

シート幅-最大:200 mmプレートの厚さ:6 mm平鋼:70 x 7 mm丸棒鋼:13 mm機械の重量:50 kg機械の寸法:約800×500×1800 mm