板金加工 中古 販売のため (3,359)

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6700 €: 129.31 €: 1550 mm: 2 mm: 90 mm: 6 m/min: 1.5 kW: 2130 mm: 700 mm: 1200 mm: 545 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMAN or ENGLISHOPTIONS:powered back roll EUR 1.000,-digital readout EUR 1.100,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 14 mm: 14 mm: 8.4 mm: 10 mm: 9 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 110 to: 4-30 mmpunching unit with hydraulic stripperhydraulic material clampsX- und Y- axis on ballscrews,each with servo motorCNC control OmronFlash memoryTouchscreenOPTIONAL EQUIPMENT:TRIPLE PUNCHING UNIT: 31/31/31 MM € 4.500,-central punch:100 % of punching forcemax. Dm. 31 mmmax. thickness 20 mmmax. Dm./thickness 31/20 mmlateral punches75 % of punching forcemax. Dm. 31 mmmax. thickness 20 mmmax. Dm./thickness 31/18 mmTRIPLE PUNCHING UNIT: 31/40/31 MM € 5.100,-central punch:100 % of punching forcemax. Dm. 40 mmmax. thickness 20 mmmax. Dm./thickness 40/20 mmlateral punches60 % of punching forcemax. Dm. 31 mmmax. thickness 20 mmmax. Dm./thickness: 31/15 mmtriple punching unit withmarking station:punching capacity as abovemax. thickness 20 mmmarking force 700 kNmax. 10 characters, interchangeabledimensions of characters 10 x 7 mm MODEL 31 ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12700 €: 243.84 €: 1270 mm: 5 mm: 140 mm: 3,5 m/min: 2.2 kW: 2470 mm: 750 mm: 1000 mm: 1350 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls€ 1.500,-Motorised Back Roll (Power Rear Roll)€ 1.200,-Digital Read-Out€ 1.200,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 €: 980.91 €: 120 mm: 390 mm: 3 : 15 kW: 2/7,5 m/min: 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm: 1650 mm: 1900 mm: 4450 kg3 rolls driven (hydromotor and planetary gearbox)shafts made of special steel,hardened and groundhydraulic adjustment of the 2 lower rollshardened universal rollslateral rolls hydraulic adjustable in 3 axeshorizontal and vertical operationmobile operating panel2 working speedsdigital read out (3 axes)machine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENC ...

: neu : ca. 4 Wochen ab Auftragse : Italien : 15200 €: 291.84 €: 22 to: 200 mm: 150 x 10 mm: 1100 x 630 mm: 120 mm: 55 mm: 4,6 - 8 mm/s: 70 mm/s: 45 l: 1,5 kW: 925 mm: 1200 mm: 900 mm: 1050 mm: 630 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 €: 603.56 €: 2050 mm: 6 mm: 6 mm: 4 mm: 4 mm: 3 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 4250 mm: 960 mm: 1100 mm: 2800 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recommende ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45700 €: 872.87 €: 2540 mm: 6.5 mm: Hydraulisch : 135 °: 3900 mm: 1750 mm: 2050 mm: 6200 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,--OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,--(sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9718 : prompt, Zwischenverkauf v : Türkei : 8300 €: 160.19 €: 1 : 50 mm: 152 mm: 162 mm: 3 : 1.1 kW: 4,5 m/min: 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm: 950 mm: 1500 mm: 500 kg3 mech. driven rolls (brake motor)hardened shafts top roll hydraulic adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6400 €: 123.52 €: 1270 mm: 2.5 mm: 90 mm: 6 m/min: 1.1 kW: 1850 mm: 700 mm: 1200 mm: 520 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 9676 : prompt, Zwischenverkauf v : Deutschland : 13700 €: 1 : 1250 mm: 1.25 mm: 1,25 mm bei 1 Messerpaar, : 0.37 kW: 36 m/min: 70 mm: 1900 mm: 1600 mm: 1000 mm: 350 kgdemo machine / mint condition - fixprice3 pairs of bladesLength measuring by wheelDigital preselection of one positionBrake motorRubber feeding rollsManual crosscutting equipment in front and behind blade shaftwith 1 cutting slide which alternaingly can be used on front and backsideUser manual in GERMANOPTIONS:Additional pair of bladesDecoilerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 8020 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 6 : 6 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...

Peddinghaus PEDDY E – Universal punching and shearing machine For sale is a robust and versatile universal machine from the renowned manufacturer Peddinghaus (Made in Germany) – model PEDDY E. The machine is designed for a wide range of machining in the field of steel construction, metal construction and locksmithing. It is ideal for cutting, punching and notching a wide variety of profiles. • Type: Pedding house PEDDY E • Machine No.: 4061259381069 • Drive: electric motor 5.9/4 kW, 220/380 V • Frequency: 50 Hz • Control voltage: 220 V • Designed for material processing such as: o Flat steel, angle steel, round material, C/Z profiles, INP/IPE beams o Punching up to Ø 1 1/8\" (28 mm) o Cutting capacity up to 100 mm INP o Material thickness: up to approx. 12 mm (depending on the profile type) Auction-ID: A7-41093-46

: gebraucht : 2017 : 8063 : prompt, Zwischenverkauf v : China: 1710 €: 1 : 1020 mm: 1.5 mm: 135 : 1348 mm: 850 mm: 1175 mm: 285 kg 上部幅、ドイツ語と英語の断面レールブースターシ� ��ンダーユーザーマニュアル。この広告のデータはLo goTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1032 €: 1 1/4 42,4, 1 1/2 48,3 mm: 3 mm: 2.5 mm: 15 kgThe AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 788 €: 3/4 26,9 mm, 1 33,7 mm, mm: 3 mm: 2.5 mm: 8 kgThe AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",).The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past.The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 9548 : prompt, Zwischenverkauf v : China : 115 €: 1 : 150 mm: 6 mm: 290 mm: 90 mm: 560 mm: 14 kg平鋼最大70 x 6 mm丸鋼最大11 mm輸送寸法 330 x 330 x 160 mm本広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され� �した�

: ca. 12 - 14 Wochen ab Auf : Türkei : 20000 €: 5 mm: 1200 mm: 2,2+0,75 kW: 4,1 m/min: 3000 mm: 750 mm: 1400 mm: 1350 kg: 250 / 2000 mm: 300 mmMobile control panelHydraulic clamp on centerGearbox motor with brakeMotorized sheet centering systemInside cutting systemAccording to EC safety regulationsOperating manualOptional equipment: 1 spare blade set € 1.200,00 Flanging attachment with 1 set rolls € 2.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 22400 €: 430.08 €: 80 to: 300 mm: 5 : 40/14 bzw. 24/24 mm: 70 mm: 40 1/min: 450x15 / 300x20 mm: 130x130x13 mm: 45 mm: 12x52x90 mm: 9 kW: 2310 mm: 1200 mm: 2050 mm: 2070 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformation by diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmstandard hydraulic, centring deviceoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISH(sample photo shows mod. hyd 80 SD) option ",Kit", EURO 970,--length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Fur ...

: neu : 2025 : 090081 : prompt, Zwischenverkauf v : Türkei : 3810 €: 1 : 1020 mm: 1.5 mm: 500 mm: 1950 mm: 1000 mm: 1150 mm: 420 kgwelded steel constructionwith manual hold down unitback gauge adjustable by handwheelusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 951 €: 1 1/2 48,3 mm, 2 60,3 m mm: 3 mm: 2.5 mm: 15 kgThe AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 €: 613.11 €: 1 : 3100 mm: 4 mm: 42 1/min: 1,5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsball in the tabletape measuretilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

直径:250mm ワークピースの長さ:120mm ワークピース幅:120mm 総電力要求:1.6kW 機械の重量約:0.2 機械の寸法約:1.2 x 0.8 x 1.3 mこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

round bar steel: 33 mmsquare edge steel: 30 mmL-beam: 60 x 8 mmhole diameter in sheet thickness: 20 in 13 mmhole punhing press: pressure: 35 thole punching press: throat: 320 mmhole punching press: max. length of stroke: 24 mmhole punching press: capacity (dia. x thick.): 30 x 9 mmhole punching press: capacity (dia. x thick.): 20 x 13 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1,5 x 0,7 x 1,8 mProfile steel shear with:- Hole punch- Notcher- Foot switch- Machine light- Mounted on a trolleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

シート幅:2040 mm 板厚:3.0 mm 柱間距離:2060 mm バックストップ - 調整可能:mm 下部ビームの調整:110 mm 上部ビームのストローク:270 mm 総電力要求:7.5 kW 機械の重量約:3.7 機械の寸法 約:3.1 x 1.5 x 1.5 m本広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され� �した�

consisting of 1 handheld device, 8 bending inserts from 10 - 22 mm Auction-ID: A1-41001-40

Auction-ID: A1-41001-86

pressure: 135 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 135 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90.0 mmNumber of working hours: ca. 40.0 hcontrol: DA 58 T oil volume: 200 ltr.voltage: 400 Volttotal power requirement: 11.0 kWweight: 8186 kgrange L-W-H: 4250 x 2150 x 2800 mm machine has rarely been in use with only approx. 40 operating hours () current new price approx. 80.000 Euro special price on request---------------------------------------------------------POWER BEND PRO electro-hydraulic press brake with : increased installation height increased cylinder stroke increased throat depth---------------------------------------------------------Equipmen t:- CNC electro-hydraulic press brake- DELEM CNC control model DA-58T graphics/touchscreen 2D graphic pr ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 20 mm: 20 mm: 12 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 5 : 5 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...