サブカテゴリ
(第3カテゴリーレベル)
生産者：
(カテゴリ： 102)
swing diameter: 520 mmcentre height: 500 mmwidth: 130 mmquill:: 3 St.diameter of quill: 70 mmbearing diameter: 65 mmwidth: 20 mmbase plate: 415x270 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1320 mmswing diameter: 1400 mmturning height: 800 mmworkpiece weight: 6000 kgcross rail adjustment: 800 mmTools changer for 12 tools: chip conveyor: coolant tank: Control: Sinumerik 840 Dtransmission ratio: 3 daylight table - ram: 950 mmslide adjustment: 750 mmtotal power requirement: 60 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 7,5x5,5x4,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1100 mmturning length: 6000 mmcontrol: Siemens 840D turning diameter over slide: 740 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: mDie Maschine ist Überholt und hat eine neue SteuerungThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing diameter: 475 mmcentre height: 510 mmwidth: 110 mmloading area: 360x310 mmdiameter of quill: 80 mmbearing diameter: 75 mmWheel width: 36,5 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1320 mmturning diameter over slide rest: 820 mmturning length: 4400 mmControl: faceplate: 1200 mmbed width: 800 mmspindle passage: 167 mmsteady: 480 control: IMS total power requirement: 76 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1100 mmswing diameter: 1250 mmturning height: 1300 mmControl: Siemens type: 805 workpiece weight: 4000 kgTool changer: 10 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2200 mmturning diameter over slide rest: 2200 mmturning length: 10000-11000 mmcontrol: Sinumerik 840 Dworkpiece weight: 70.000 kgfaceplate: 2000 mmsteady: 2 Torque: 125000 Nmfeed: 0,3-4000 mm/minrapid traverse: 4000 mm/minroll stand: total power requirement: 110 kWweight of the machine ca.: 120 tdimensions of the machine ca.: 22x6,2x2,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 20 mmturning length: 230 mmcontrol: Fanuc 16iT total power requirement: 0,55 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: 2275 x 1300 x 1760 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2200 mmswing diameter: 2500 mmturning height: 1600 mmControl: Siemens chip conveyor: total power requirement: 100 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mvertical lathe with two RAM, faceplate Ø 2000 mm, SPS supportedcontrol for storable cycles, RAM/channel 1 two Capto recordings C8 withInternal tool cooling, RAM/channel 2, two Capto mounts C8 withinternal tool cooling, Chip conveyor / spindle Z-axis as new / without KSSFilter unit / 3 glass scales are missing / control panel is disconnected but complete andOK, a 90 degree angle is missing from the control panel armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1200 mmswing diameter: 1400 mmturning height: 1190 mmControl: Siemens type: 840C max. ram stroke: 1250 mmTool changer: 12 PosTable load: 9000 kgcross rail - adjustment: 800 mmturning speeds: 2,5-250 U/minrapid traverse: 4 m/mintotal power requirement: 55 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 3,95x3,6x5,56 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 820 mmturning length: 5000 mmturning diameter over slide: 460 mmcontrol: B2T max. torque on the spindle: 3400 Nmturning speeds: 5,6-1120 U/minFeed: 1-5000 mm/minRapid movement: 5000 mm/mintailstock quill taper MT: 6 3 jaw chuck Forckrath: 630 mmsteady: 525 mmsteady: 335 mmmain drive motor: 50 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 630 mmturning diameter over slide rest: 380 mmturning length: 400 mmspindle passage: 105 mmturning speeds: 24-1800 U/minRapid travel: steady for max. workpiece diameter from: 340 mm3 jaw chuck Forckrath: 315 mmthroat: 700 mmlength of gap: 300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
machine: 15 Pos.accessories:: Pos. electric measuring devices: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: mmspindle passage: 23 mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 930 mmturning diameter over slide rest: 630 mmturning length: 8000 mmspeed: 800 U/minspindle passage: 105 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1000 mmturning diameter over slide rest: 640 mmturning length: 6300 mmturning dia. in gap: 1250 mmspindle diameter: 50 mmspeed: 6-925 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1150 mmturning diameter over slide rest: 800 mmturning length: 6300 mmspindle diameter: 100 mmspeed: 4-800 (x24) U/minturning dia. in gap: 1500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 710 mmturning length: 2000 mmcontrol: Heidenhain type: Manuel Plus turning diameter over slide: 410 mmx-travel: 385 mmturning speeds: 9-1800 U/mintransmission ratio: 2 drive capacity - workpiece: 22 kWTorque: 2500 Nmspindle diameter: 160 mmspindle passage: 92 mmtotal power requirement: 49 KVAweight of the machine ca.: 5,6 tdimensions of the machine ca.: 5x2x2,2 mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 60 mmcross-slide: 4 turret head: 6 Pos.thread cutting attachment: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 800 mmturning length: 2000 mmcontrol: Monfort R&D turning diameter over slide: 520 mmspindle hollow: 88 mmtotal power requirement: 53 kWweight of the machine ca.: tdimensions of the machine ca.: 4,2x2,2x1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 290 mmturning length: 450 mmcontrol: CNC spindle passage: 65 mmturning diameter over slide: 185 mmturning speeds: 3000 U/minTool changer: 12 work piece power: VDI 40 live tooling: chip conveyor: kWcoolant: swing diameter: 600 mmtotal power requirement: 45 kWweight of the machine ca.: 4,7 tdimensions of the machine ca.: 4,5x2,5x2,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1000 mmswing diameter: 1400 mmturning height: 1100 mmControl: Siemens type: 840 D Shop TurnTool changer: 12 Pos.x-travel: 2000 mmz-travel: 700 mmslide adjustment: 1000 mmRapid movement: 6000 mm/minturning speeds: 500 U/min: total power requirement: 62 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 3050 mmturning diameter over slide rest: 2500 mmturning length: 21200 mmControl: Siemens type: 840D turning speeds: 0,236-60 U/minfaceplate: 3000 mmmain drive motor: 200 kWtailstock quill diameter: 900 mmroll stand: steady: 1200 mmsteady: 1200 mmsteady: 750 mmsteady: 750 mmwith live steady: 2000 mmfaceplate: 2000 mmThickness: 330 mmworkpiece weight: 200 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 60 mmcross-slide: 4 turret head: 6 Pos.thread cutting attachment: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1500 mmControl: Siemens type: 840 D Tool changer: workpiece weight: 6500 kgSlide movement vertical: 1000 mmturning speeds: 10-315 U/minFeed: 3600 mm/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1650 mmturning diameter over slide rest: 1200 mmturning length: 7500 mmturning dia. in gap: 2500 mmspindle diameter: 105 mmspeed: 3,55 - 180 (x24) U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1070 mmturning length: 8500 mmcontrol: Alan Bradley 9 Series Turning diameter over slide: 800 spindle diameter: 130 mmspeed: 1,12 - 1120 m/minvoltage: 480 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 600 mmturning length: 1500 mmcontrol: C200 T turning diameter over slide rest: 425 mmspindle passage: 100 mmTool changer: live tooling: turning speeds: 10-2800 U/mintransmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mmsteady: tail stock: c-axis: total power requirement: 53 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
