旋盤 中古 販売のため (3,151)

中心距離:2000 mm:600 機械の重量 約3.2 t通行 49 mm DigitalLynette この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

faceplate diameter: 1.600 mmswing diameter: 2.000 mmturning height: 1.400 mmControl: Fanuc max. Torque: 23.863 Nmcutting capacity: max. 3.000 kgfmax. workpiece weight: 10.000 kgtable:: table diameter: 1.600 mmtable speeds: 0,7 - 280 1/minpower capacity - table: 37/45 kWC - Axis:: resolution: 0,001 °Working speed: 0 - 1.200 °/minmax. table speed: 3,333 1/minturret slide:: Shank diameter: 32 mmspindle cone: ISO 7/24 / No.50 Spindlespeed: 30 - 3.000 min/-1power capacity - Tool Spindle: 15 / 18,5 kWmax. Torque: 235 Nmram cross section: 220 mmaxis stroke:: x-axis: 1.900 mmz-axis: 900 mmcross rail adjustment: 700 mmTool-Presetter:: tool taper: MAS-BT 50 number of toolpositions: 24 (12 + 12) pos.max. tool weight: 50,0 kgdraw bolt: DIN 69872.50 feeds:: rapid feed (X / Z): 7,5 m/minfeed speeds: max. 7.500 mm/minrapid traverse of the crossrail: 300 mm/mintotal power requirement: 80 kVAweig ...

旋回直径:mm回転距離:mm制御:0総消費電力:kW 機械の重量 ca:必要スペース:mこの広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

greates pass round over bed: 1050 mmdist. between centers: 6000 mmcentre height: 520 mmturning length: 4810 mmworkpiece weight max. (main spindle): 6000 kgMaximum workpiece weight with steady rests: 8000 kgmax. torque on the spindle: 12500 Nmnumber of spindle speeds: 2,8-560 1/minSpeed range 24 levels: feed per revolution: 0,08-56 mmchuck diameter: 630 mmMaximum travel distance of the longitudinal slide: 4810 mmMaximum travel distance of the cross slide (suppor: 530 mmMaximum travel distance of the tool slide (support: 340 mmTailstock quill diameter: 150 mmtotal power requirement: 31 kVAweight of the machine ca.: 10500 kgdimensions of the machine ca.: 7860 x 1970 x 1480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

旋回直径:- mm回転長さ:- ベッドスライドを横断する回転直径mm:- 総電力要求量:- 機械のkW重量約:機械のt次元約:mこの広告のデータはL ogoTech oHGのソフトウェアソリューションModulMWSで作成され� �した�

faceplate diameter: 4770 mmswing diameter: 5300 mmturning height: 4130 mmfaceplate turning speed range -stepless-: 0,4 - 45 U/minfeeds infinitely variable: 0,1 - 4000 mm/mintable load: 100 tmain drive motor: 80 kWControl: Siemens 840D vertical Stroke: 3200 mmcross travel: 3600 mmram adjustment: 2000 mmram swivable +/-: 30 z-travel: 1950 mmtotal power requirement: - kWweight of the machine ca.: 125 tdimensions of the machine ca.: 15 x 9 x 13 mequipped with:- CNC control Siemens 840D- 2 Rams on Crossbeam- Pickup magazine with 8 tool holder positions- Automatic clamping of the tool holder in the ram- 1x straight boring head- 1x 90° angle head (not in the pickup magazine)- 1x set of jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ベッドでの旋盤直径:2150mm スライドレストでの旋盤直径:1800mm 旋回長さ:10000mm 速度:1 - 300 U/minフェイスプレート直径:1800mm スピンドルボア:200mm 総動力要求:- 機械のkW重量 約:- 機械の寸法 約:- m- 4つ顎フェイスプレート 1800mm - 2 定常レスト 100〜560mmおよび1.3〜1.8m - 4方向ツールポスト-テールストック本広告のデータ� �LogoTech oHGのソフトウェアソリューションModulMWSで作成され� �した�

turning diameter: 640 mmturning length: 1.185 mmcontrol: SINUMERIK 840D swing diameter: 640 mmdistance of spindle heads: 1500 mmslide I:: X1 / Y1 / Z1 / B slide travel X-axis: 550 mmslide travel Z-axis: 180 mmZ- Travel: 1.185 mmB - axis: 240 °feed x-axis: 0 - 40.000 mm/minfeed y- axis: 1 - 24.000 mm/minFeed z- axis: 1 - 70.000 mm/minfeed B-axis: 1 - 20 1/minrapid traverse X/Y/Z: 40 / 24 / 70 m/minfeed capacity X/Y/Z: S6: 7,00/11,00/7,50 kNtool taper: HSK 63 turning speed milling-spindle: 10 - 12.000 1/minpower capacity at 100 % load: 13,20 kWpower capacity at 40 % load: 22,00 kWtorque milling spindle: 60 / 100 Nmtool magazin:: no. of workpieces in the magazine: 46 Stücktool length - max.: 350 / 200 mmtool diameter: 80 mmwotkpiece diameter with 2 vacant positions: 120 mmweight of tools max.: 6 / 10 kgslide II:: X2 / Z2 slide travel X-axis: 180 mmZ- Travel: 1.050 mmfeed x-axis: 1 - 24.0 ...

旋回直径:mm回転距離:mm制御:0総消費電力:kW 機械の重量 ca:必要スペース:mこの広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

turning diameter: 400 mmturning length: 1100 mmcontrol: Siemens Sinumerik 840D SL greates pass round over bed: 500 mmSwing dia. over traverse guideway: 370 mmMain spindle:: Max. rpm: 5000 min/-1power capacity - main spindel: 17 / 25.5 kWmax. Torque: 345 Nmspindle diameter in front bearing: 130 mmspindle bore: 67 mmchucking diameter: 325 mmspindle nose: A8 axis stroke:: x-axis: 750 mmy-axis: +/- 100 mmz-axis: 1200 mmfeeds:: rapid traverse: 40 / 40 / 40 m/minTailstock:: tailstock: 1200 mmtaper of center: Mk 5 tension force: max. 8 kNmilling head: b-axis: +/- 120 °tool taper: HSK A 63 tool piece magazine with: 60 spindle turning speed - stepless: 12000 U/minspindle motor: 10,5 kWmax. torque on the spindle: 90 Nmtotal power requirement: - kVAweight of the machine ca.: 9 tdimensions of the machine ca.: 4,6 x 2,5 x 2,82 mEquipped with:- Siemens 840D SlimLine / Celos CNC control- 3-jaw ch ...

faceplate diameter: 1250 mmswing diameter: 1400 mmturning height: 1400 mmcontrol: Siemens 840D travel -x axis: -80 / +1100 mmtravel -z axis: 1060 mmworkpiece height max.: 1400 mmmax. workpiece weight: 8000 kgShank diameter: 200 x 240 mmtable turning speeds: 2- 400 U/mindrive capacity - spindle motor: 44 kWmax. torque on the faceplate: 14510 Nmrapid traverse: 12 m/minturning speed range - milling: 0,01 - 7,4 U/minspeeds of tool: 4 - 3000 U/minwork piece power: 22 kWTorque: 840 Nmtotal power requirement: 90 kVAweight of the machine ca.: tdimensions of the machine ca.: mequipped with:- CNC control Siemens 840Dsl- C-axis- driven tools- tool changer 12-fold (driven tools)- complete enclosure- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 900 mmtravel -y axis: 200 mmtravel -z axis: 800 mmB-axis swival range +/-: +90 / -20 °positioning accuracy: C: 9 control: SIEMENS number of spindle speeds: 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315The machine is in very good condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: PV315 | PV-315The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working diameter: 140 mmturning diameter: 185 mmworkpiece length: 120 mmcontrol: Siemens turning speeds: 7.000 U/minVertical Turning Machine | FAMAR - BISUB 160 2GThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: BISUB1602G | BISUB160 2G | BISUB-160 2GThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chuck diameter: 500 mmswing diameter over bed slide: 700 mmcontrol: Siemens travel -x axis: 630 mmtravel -z axis: 500 mmCNC turning and milling center vertical | EMAG - VMC 450 MTThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2950 mmswing diameter: 3200 mmturning height: 3500 mmtable load: 20 tfeed range: 3000 mm/minmain drive motor: 70 kWmilling drive: 16,1 kWControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling headInspection under power in the factory possible.Machine location is Spain.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 540 mmswing diameter over face slide: 370 mmcentre distance: 3000 mmcentre height: 270 mmturning dia. in gap: 815 mmbed width: 344 mmspindle bore: 88 mmspindle diameter in front bearing: 133 mmspindle taper: 11 D1 Camlock turning speed range: 18-1400 U/minturning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mmface feeds: 0,03-0,5 mmmetric threading: 0,4-14 mminch threading: 2-72 G/1thread - module: 0,3-3,5 mmthread - DP: 8-60 Pitchtailstock quill diameter: 75 mmquill stroke: 230 mmtaper of tail spindle: MK 5 slide valve travel: 280 mmupper head travel: 150 mmOverall size: ca. 4700 x 1100 x 1400 mmweight: ca. 3200 kgpower capacity: 9,4 kWAccessories:3-axis digital display FagorRöhm wedge bar chuck Ø 315 mmMultifix steel holder size Cincl. 6 interchangeable cassettesRotating center pointTurning chuck guardRear chip guardCoolant deviceWor ...

turning diameter: 270 mmturning length: 630 mmcontrol: SIN840D swing over bed: 400 mmswing diameter over slide rest: 220 mmlongitudinal slide -travel: 745 mmcross slide - travel: 200 mmturning speeds: 10 - 4.000 U/minpower capacity at 100 % load: 15,00 kWspindle head DIN 55026 - Size: 6 spindle bore: 62 mmchucking diameter: max. 315 mmfeed x-axis: 1 - 12.000 mm/minrapid traverse X-axis: 12,00 m/minFeed z- axis: 1 - 20.000 mm / min.rapid traverse Z-axis: 20,00 m/mintailstock quill taper MT: 3 quill stroke: 112 mmquill pressure: 10,00 kNtool turret with 12 work positions: tool taper DIN 69880: Ø 30 mmTool drive speed max.: 4.000 1/mintotal power requirement: 37,00 kWweight of the machine ca.: 4,00 tdimensions of the machine ca.: 4,00 x 2,75 x 2,30 mWith SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool holders.The data for thi ...

swing diameter: 560 mmturning length: 800 mmcontrol: C200-4D Siemens 840 DMain spindle:: spindle head: 8 DIN 55026/55021 ISO 7027/1bar capacity: 90 mmspindle diameter in front bearing: 140 mmturning speed range - spindle: ~ 3.500 U/mindrive capacity - spindle motor: 100% / 40%: 43 / 57 kWTorque: 275 / 363 NmIndexing: 2,5 °C-Axis: 0,001 °turret:: Number of Turrets: 1 number of toolpositions: 12 pos.Spindle speed - driven tool stations: ~ 6.000 min -1power capacity - driven tool-stations: 11 kWtool taper: 40 x 63 mm DIN 69880Torque: 21,5 Nmtravel -x axis: 300 mmtravel -z axis: 800 mmrapid traverse: X/Z: 30 / 22,5 m/minfeed power: X: 7.200 Nfeed power: Z: 9.000 NTailstock:: dia. of quill: 65 mmCone: SK 30 longitudinal travel: 800 mmrapid traverse: 10 m/mintotal power requirement: 51 kVAweight of the machine ca.: ca. 14 tdimensions of the machine ca.: 7,3 x 4,0 x 2,6 mChip conveyor: Co ...

turning length: 4.500 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 5.200 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500equipped with a turret for driven tools as well as NC steady rest and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MCT4500 | N40MCTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 - 900 mmturning diameter over slide rest: ? mmturning length: 1000 - 1500 mmtotal power requirement: ? kWweight of the machine ca.: tdimensions of the machine ca.: mFree at short notice due to current company resolutionIn use until the endUntested, wear and tear due to age and useMachine package 5 x lathe2 x CAZENEUVE HB 5001 x WEISSER Junior1 x SCHAERER UD 630 x 15001 x ERNAULT SOMUA HN 500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

旋盤直径:250 mm 旋回長:555 mm 制御:FANUC 18i-TB 回転速度範囲:50-4500 + 5000 U/minturret ヘッド:2×24 12 アンジェトリーベン 寸法(L/W/H):8000 x 2300 x 2400 mm 機械の重量 約7.5 tY- および B- 軸 その他アクセサリー詳細は www.marcels-maschinen.ch この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

spindle passage: 375 mmturning diameter over bed: 1030 mmturning length: 1750 mmspindle bore: 375 mmmax. turning diameter: 650 mmspindle turning speed range: 5- 500 U/minspindle motor: 45 / 37 kWControl: OSP P300 L x-travel: +330 / -140 mmz-travel: 2040 mmrapid traverse x + z axis: 5 / 10 m/mintail stock: tailstock quill diameter: 180 mmtailstock quill stroke: 200 mmtaper in tailstock MT: MT 6 total power requirement: kWweight of the machine ca.: ca 23 tdimensions of the machine ca.: 7,1 x 3,2 x 2,85 mCnc Oil Country LatheCNC-controlled oilfield latheFor heavy-duty machining of large and heavy turned parts andpipe end machining- CNC Control OSP P300L- Front and Rear CHUCK: SMW Autoblok 3 - jaw Chucks (both 850mm dia.)- Tool Revolver 12-fold (static Tools)- Chip Conveyor- ExhausterPower on: 20.538h , N/C Running Time: 2.270hSpindle Revolution Time: 2.287h, Cutting Time: 1.691hThe data ...

turning diameter over bed: 460 mmturning diameter over slide rest: 280 mmturning length: 1000 mmcentre height: 230 mm: 720 mmspindle bore: 53 mmspindle turning speed range: 28 - 1250 U/mintotal power requirement: 4,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,4 x 1,4 x 1,75 mmLathes with:- Digital display- Quick-release tool post- 3-jaw chucks (200 mm and 160 mm)- Chip tray- Centering centerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

回転直径:---mm 回転距離:--- mm制御:--- 総電力要求:---kW 機械の重量 ca.: --- 機械の大次元 ca.: --- mこの広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

faceplate diameter: 6300 mmswing diameter: 7000 mmturning height: mmram adjustment: mmcross rail adjustment - vertical: mmram head - cross travel: mmram swivable +/-: °main drive: kWtable revolutions:: 0 - 14 U/mnworkpiece weight: 75 /125 tram head dimension: mmtotal power requirement: 170 kWweight of the machine ca.: 120 tdimensions of the machine ca.: 10 x 10 x 7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 370 mmturning diameter over slide rest: 200 mmturning length: 1000 mmcentre height: 185 mmspindle bore: 56 mmtailstock quill taper MT: 4 turning speeds: 50 - 2000 U/minpower capacity: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,3 x 1,1 x 1,3 mCenter lathe200mm three-jaw chuckSize B Multifix tool post3 Multifix tool holdersEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1030 mmturning diameter over slide rest: 800 mmturning length: 3200 mmturning diameter: 900 mmcontrol: FANUC 31i B : 165 mmspindle cone: ASA A1-15 travel -x axis: 470 mmtravel -z axis: 3235 mmrapid travel - longitudinal/face: 12 / 10 m/minMeasuring Speed: 3 - 1500 1/minspindle drive: 45 / 37 kWmax. workpiece weight between centres: 7300 kgmax.workpiece weight:each extra steadyrest: 1600 kgtail stock: tailstock adjustment: 3135 mmtailstock quill diameter: 160 mmtailstock quill stroke: 150 mmtailstock quill taper MT: 6 total power requirement: 64,44 kVAweight of the machine ca.: 22 tdimensions of the machine ca.: 7,36 x 2,77 x 2,78 mHigh-precision turning centre- 3-jaw chuck dia. 800 mm- FANUC 31iB CNC control- Tailstock- Hydraulic steady rest- 12-station tool turret (32 x 32 mm)- Chip conveyor- Coolant system- Tool setter- CEThe data for this ad was created wit ...

greates pass round over bed: 810 mmswing diameter over face slide: 560 mmcentre distance: 2000 mmbed width: 480 mmslide valve travel: 400 mmupper head travel: 180 mmturning tool - shaft cross cut: 32 x 25 mmpower capacity: 22 kWmax. torque on the spindle: 3200 Nmspindle head: Gr. 11, DIN 55027 spindle diameter in front bearing: 152,4 mmspindle bore: 106 mmturning speed range: 9 - 1800 U/minturning speeds: 24 longitudinal feeds:: 0,092 - 41 mm/Uface feeds: 0,046 - 20 mm/Umetric threading: 0,5-112 mminch threading: 1/4 - 56 G/1thread - module: 0,125 - 28 mmthread - DP: 1 - 224 Pitchtailstock quill diameter: 115 mmquill stroke: 225 mmtaper of tail spindle: MK 6 max. workpiece weight between centres: 2000 kgmax. workpiece weight -without tailstock: 750 kg3-jaw chuck: Röhm, Ø Overall size: ca. 4600x1900x1600 mmweight: ca. 4300 kgNumber of feed stages and threads: 99Accessories:3-axis digita ...

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.