旋盤 中古 販売のため (3,049)

: neu : Bulgarien : 126650 €: 2393.69 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 7500 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 111610,00 turning length2.000 mm € 115430,00 turning  ...

After receiving the contract, we can recommend a dismantling company on request. Auction-ID: A7-48221-5

: neu : Bulgarien : 58370 €: 1103.19 €: 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: 120 : 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3600 mm: 1500 mm: 1650 mm: 3110 kgIn contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.driven by variable speed control (3 steps)3-axes digital readout Fagor with CSS (constant surface speed)quick change toolp ...

: neu : Bulgarien : 140320 €: 2652.05 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 125460,00 turning length4.000 mm € 148950,00 turning ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 86980 €: 1643.92 €: 860 mm: 3000 mm: 430 mm: 132 mm: 620 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 - 2/3 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 3470 mm: 1700 mm: 1730 mm: 4650 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",F ...

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 19800 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 0.2 - 4 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 680 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with various collets from 1 to 27 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in GermanBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live te ...

: neu : Bulgarien : 89440 €: 1690.42 €: 760 mm: 3000 mm: 380 mm: 132 mm: 520 mm: 560 mm: 11 : 140 MK: 3 : 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4470 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine  ...

Auction-ID: A3-46197-20383

The range of application of this machine is in the single part and Small batch production from the simplest to the most complicated contours. It is characterized by: --> Ease of use <-- - All controls are ergonomically convenient and outside the chip area - The slides can be moved with handwheels, in addition to the Travel distance per handwheel rotation can be changed by the operator - Feed rate and speed or cutting speed can be adjusted during the editing can be changed using the correction switches. --> Precision <-- - Bed slide guides with adjustable wedge strips guarantee a long Long-term accuracy --> Workspace <-- - Wide speed range at high power, with and without gearbox - High feed forces allow the use of modern tool systems - Large rapid traverses minimize non-productive times. - 1x Tailstock - 1x bezel - Jaws for lathe chuck Auction-ID: A1-48483-112

旋盤直径:590 mm 旋盤長:1100 mm 制御:ファナック ベッドの旋盤直径:800 mm 総動力要求:--- kW 機械の重量 約:9.5 トロール 機械の寸法 約:--- m本広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

Machine body 1 Basic machine: VLC 200 GT (Siemens) Serial Number: 114718 Hours read: 6512 Additional equipment and expansion stages 18 kW main spindle, 3000 1/min Tool carrier unit 12 × D40 mm DIN 69880 2 motor grinding spindles type 140/45.000 Oil air lubrication device for max. 2 grinding spindles Dressing unit with sensors Workpiece transport system O-version Pallet fixing device 21 workpiece carriers for O-band Blowing off the workpiece and clamping device Hinged belt chip conveyor Emulsion mist extraction Coolant supply 8 bar (100 l) Paper belt filter with cooling unit Magnetic pre-separator Interface Paper Belt Filter Workpiece Measurement PROFINET interface Siemens HT8 hand-operated handset with handwheel Connection kit Siemens HTx Machine body 2 Basic machine: VLC 200 GT (Siemens) Serial Number: 114719 Hours read: 6179 Additional equipment and expansion stages 18 kW main spin ...

Production 1 CNC lathe Maier MLK32 D-5 2009 Control, Fabr. Maier/Fanuc, separate cooling /Lubricant preparation, Fabr. Knoll, type KF110, Belt filter, CO2 extinguishing system, Fabr. Kraft + Bauer, Bar Feeder, Fabr. FMB, Type Turbo 3-36, Ser.-Nr. 261209, L 4,200 mm, Accessories: Bar table, Sheet Steel Cabinet Control GE Fanuc 7 axes (X1,Z1,Y1,C1 X2,Z2,C2) Auction-ID: A7-48452-4

General description CNC lathe WEILER 120 CNC, designed for precision turning operations in toolroom and small batch production environments. Compact and robust German-built machine suitable for prototyping and workshop use. Technical details Manufacturer: Weiler (Germany) Model: 120 CNC Type: CNC / teach-in lathe Control: Siemens SINUMERIK System 3 Tooling system: Multifix quick-change toolpost Working area: Enclosed with splash guard Cooling: Coolant hoses visible Operation: CNC with manual access doors and chip tray Control panel: Screen, keypad, feed/speed controls, emergency stop Application: Precision turning, prototyping, and small series production Equipment - Siemens SINUMERIK System 3 control - Multifix quick-change toolpost - Coolant system - Enclosed working area - Chip tray Condition and remarks Used machine, untested. Shows signs of wear consistent with age but appears co ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 46970 €: 897.13 €: 500 mm: 1500 mm: 250 mm: 80 mm: 300 mm: 400 mm: 8 : 80 MK: 21 : 20-2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3100 mm: 1250 mm: 1400 mm: 2820 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 250 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm € 49010,00 turning length3.000 mm € 53 ...

: gebraucht : 2015 : 1686 : prompt, Zwischenverkauf v : England : 14800 €: 1 : 330 mm: 1000 mm: 167 mm: 38 mm: 210 mm: 12 : 40 - 2500 1/min: 16 : 0.03 - 1 mm/U: 0.2 - 14 mm: 2 - 56 TPI Gänge/: 190 mm: 92 mm: 42 mm: 3 MK: 110 mm: 2.2 kW: 1940 mm: 1000 mm: 1550 mm: 685 kg3-axis digital read out Newall4-jaw chuck Bison diameter 160mm with inside and outside jawsQuick-change tool post with 1 holdCoolant deviceChuck protectionSteel holder protectionLead screw coverMachine lightManual brakeOperating manual in German with EC declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• R ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 138800 €: 2623.32 €: 1020 mm: 2000 mm: 510 mm: 358 mm: 770 mm: 560 mm: 361 MK: 12 : 6,3 - 315 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 505 mm: 270 mm: 105 mm: 6 MK: 225 mm: 18.5 kW: 6400 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type D1, system like Mult ...

turning diameter over bed: 460 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 600 mmturning speeds: 22 - 1500 U/mincentre height: 230 mmspindle bore: mmtotal power requirement: 6,5 KWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 mCentre lathe- Forkardt F200 3-jaw chuck- Multifix quick-change tool post- Steady rest- Chip tray- Tailstock centreThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 42910 €: 819.58 €: 400 mm: 750 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 4 : 18-98, 48-265, 144-790, 3 U/Min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 7.5 kW: 1530 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Year of build: 1998; Operating hours: 17632; Toolholder type: VDI 20; Live tooling: yes; X-axis travel: 160mm; Z-axis travel: 350mm; Auction-ID: A1-48232-22

Operating hours: 5774; Distance between centers: 975mm; Mill spindel speed: 0-7000 rpm; Spindel toolholder type: C4 Axis displacement X/Z - X2/Z2: 400/700 - 205/750mm; Axis displacement Y-axis: +/- 50mm; Amount of tool places: 48; Auction-ID: A1-48232-19

C-axis 12-place motorized tool turret Machinery ready for loading, organization by the buyer It is possible to request to use the team provided by Surplex, amount to be defined Auction-ID: A7-48409-2

Maximum turning diameter : 140mm, turning length : 233,5mm, spindle bore: 31mm, 3-jaw chuck ø95mm. Equipped with Spandau coolant system and Vogel central lubrication. Auction-ID: A1-48232-20

Maximum bar passage 81 mm 10-place tool turret Machinery ready for loading, organization by the buyer It is possible to request to use the team provided by Surplex, amount to be defined Auction-ID: A7-48409-1

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113620 €: 2147.42 €: 800 mm: 2000 mm: 400 mm: 260 mm: 560 mm: 560 mm: 318 MK: 12 : 8 - 400 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 11 kW: 6000 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type C, system like Multifix i ...

Self-centering chuck 3 jaws Rohm 400 mm Independent chuck 4 jaws Rohm 600 mm Running glasses 30-200 mm Fixed Seat with Rollers 40-215mm Fixed Glasses with Rollers 210-390 mm Sony digital readout 2 axis Multifix quick-change holder type D Fixed center Rotating center Pivot bus Manual & drawings German language Manual English Auction-ID: A1-47352-171

: neu : Bulgarien : 133550 €: 2524.1 €: 1090 mm: 3000 mm: 500 mm: 155 mm: 690 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 240 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8050 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 118510,00 turning length4.000 mm € 142090,00 tu ...

Approximate size 800 × 2250 × 1700 mm equipped with DiTron D602V control Bar Passage: 65 mm Auction-ID: A7-48410-882

Operating hours: 14618; Tool shaft type: VDI 30; X-axis travel: 250mm; Z-axis travel: 635mm; Auction-ID: A1-48232-21

control: FANUC 18i TB turning diameter: 280 mmturning length: 400 mmc-axis: indexing: 0.001 °turning speeds: -6000 U/mintool taper: DIN ASA A2-5 Top turret tool hodler:: 12 rapid traverse X-axis: 24 m/minrapid traverse Z-axis: 30 m/minOverall size: 5000 x 2000 x 2600 mmweight of the machine ca.: 6300 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

制御:FANUC 0i TC 旋盤直径:520 mm 旋盤長:1090 mm 旋回速度:-3500 U/min タレットツールホドラー::12 ラピッドトラバース X軸:20 m/minrapid トラバース Z軸:24 m/min 全体サイズ:3000 x 1800 x 2000 mm 機械の重量約6tこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�