サブカテゴリ
(第3カテゴリーレベル)
生産者：
(カテゴリ： 209)
flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at ...
flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspens ...
ロール数:4名; 速度:2 - 30 m/min; 速度数:2ゲトリーベ、2モーター、2ツァーンラート・ ヴェクセル(8);
flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs.Exchangers 2 or 3 smoke revs.Inner side made of bright sheet metal for casing and insulation.Outer side made of zinc plated sheet metal.Frame made of painted profile.Feeding doors with refractory and extractable grates.Panels with refractory for pipes cleaning.Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspen ...
racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is aspace-saving and gentle solution for storingpainted workpieces. The four swivel castorsmean that it can also be used for transportingworkpieces.Its solid tube frame design can be adjusted between200 mm and 2,000 mm.With 17 inside and outside plastic-coated supporttubes on each side, the rack can support up to400 kg of evenly distributed weight. The plug-in inside and outsidesupport tubes can be taken out and re-inserted as needed.When not in use, the drying rack can be collapsedand takes up minimal space.
角度:0Â - 90Â; 最大切断長:1370 mm; ソーのキャリッジに取り付けるのが簡単で、0Ânから 90度までのどの角度でも狭く短いワークピースに素 く段階的にマイターカットを行えま
出力:40 - 100 kg/h; ブリケット寸法:60 mm; 石炭長:40 - 70 mm; 自動起動:はい; オイル予熱システム:はい; 最大湿度:15%; 容器直径:1000 mm; 寸法:1850 mm x 1170 x 1510 mm(L×BxH); モーター出力:7.5 kW; パワーパネル:PLCとタッチスクリーン搭載のシーメン ス; 体重:770 kg; ブリケットマシンは、木材コルクゴム、プラスチッ 糸、ふわふわ、天然繊維、繊維、粉、ハイド、紙 コーヒーハスクなどに適しています
hourly output: 10 - 25 kg/h; briquette: cube 30mm x 30mm; drum dimension: 0,33 m³; dimensions: 1300mm x 740mm x 1200mm (L x B x H); motor Power: 2,2kW; weight: 233 kg; Very compact construction and economic operation.
Graf Maschinenhandel GmbH
