サブカテゴリ
(第3カテゴリーレベル)
生産者：
(カテゴリ： 106)
pressure: 200 tpassage width: NA mmstroke: 180 mmtable length: 690 mmtable width: 530 mmdistance between columns: 420 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mHydr. 4-Pillar Press for Embossing/CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 3 tthroat: 0 mmstroke: 200 mmtotal power requirement: 15 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mFully Automatically Straightening Press, 3 Stations,parts turning, (bolts)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 tcolumn daylight: 2600 mmstroke: 800 mmtable surface area: 6000 x 3000 mm: max. 800 mmadjustment of press crosshead: 5200 mmslide adjustment -horizontal: 1800 mmCapacity: 162 l/minfeed down: 9 mm/secfeed up: 14 mm/sectotal power requirement: 45 kWweight of the machine ca.: 50 t- Hydraulics : Rexroth- Controls : Tailor- Cylinder chromed- Operation via remote control & joystick- Stroke length adjustable via sensors- Pressure adjustable via PLCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 26,0 kNstroke: 60 mmthroat: 110 mmWorking height from to: 70 - 250 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 46 Kgdimensions: 310 x 140 x 475 mmKnee lever hand presses SPECIAL PRICE!HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear withcomfortable and easy to adjust with a side crank.Stand height 475 mmEven more pressure in production without additional effort.Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology.Particularly stable construction of the spindle head and columnThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 tthroat: 0 mmstroke: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mD U N K E S (Germany)CNC Controlled Hydraulic Double Column PressModel HD 10Year 1993________________________________________________________Pressure 10 tons Ram stroke 400 mmMounting height 600 mmTable size 400 x 300 mmTable height above floor 820 mmRam area 400 x 300 mmRam bore 40 mmQuickspeed, downwards, max. 70 mm/sWorking speed, downwards, using max. pressure 40 mm/sWorking speed, min. 5 mm/sWorking speed adjustable from ...
オファー 24591 仕様： - 最大プレス力 25 t - 最大ラムストローク 500 mm - 吊り上げ速度 0 - 40 mm/s - リターン 0 - 200 m/min - 設置高さ:800mm - ラムの中央への突起360mm - プッシャークランプ面 440 x 360 mm - プランジャークランプピン40 mm - テーブルサイズ 630 x 500 mm - テーブル床面からの高さ 710 mm - 熱成形力 10t - 最大深絞り深さ 160 mm - 駆動 400 V / 4 kW - 必要なスペース 幅800×高さ2720×奥行1150mm ●重量約 2500キ
pressure: 200 ttable length: 2500 mmtable width: 1800 mmtable travel: 2700 mmdayligth: 2250 mmupper clamping surface:: 1800x2500 column base area: 1900 mmtotal power requirement: 22 KWweight of the machine ca.: 30 tdimensions of the machine ca.: . mNominal force: 1000 kNTop plate pivotsTable is movableThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created w ...
オファー 25100 仕様： - 圧力容量 200t - 作業幅3050 mm - 支柱間の通路2550 mm - テーブル幅 180 mm - 突起 250 mm - 設置高さ400mm - 送り速度 80mm/秒 - 作業速度 6.7mm/秒 - 後退速度 67mm/秒 - プランジャーストローク 150 mm - 調整範囲固定ストップ120 mm - 400V、14.5kWを駆動 - 必要なスペース 幅3800×高さ2980×奥行1700mm ●重量約 11500キロ - 付き: - 2本のストップフィンガー付きバックゲージ - 鹿の足の道具 - 4倍ユニバーサルダイ - 両手操作パネル、フットスイッチ
pressure: 80 tthroat: 280 mmstroke: 10-100 mmno. of strokes: 52/80 Hub/minram - range of adjustment: 60 mmtable surface area: 850x550mm mmram surface: 420x220 mmhole in the table: 300x200 mmtable height: 780 mmtool hole in ram: Ø 45 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 2000x2000x2700mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 180 tchamfer lenght: 3050 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 150 mmreturn speed: 65 mm/secajustment speed: 50 mm/secwork height max.: 1010 mmoil volume: 150 ltotal power requirement: 11 kWweight of the machine ca.: 9500 kgdimensions: 3100 x 1750 x 2850 mmFurnishing:- DELEM CNC control DA65- controlled axes: Y1 + Y2 + X + R- Electric crowning device WILA, controlled via CNC- Electric back stop, travel range 600 mm- hydr. Upper tool holder WILA- hydr. WILA lower tool holder- front laser protection device FIESSLER- 5x manually adjustable stop fingers, foldable- 2x front support arms sliding system”- side + back protection device- Hand and foot controls- Operation manual?The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 ttable length: 1250 mmtable width: 900 mmtable travel: 1200 mmdayligth: 700 mmupper clamping surface:: 1000x1200 total power requirement: KVAweight of the machine ca.: 12 tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
圧力:35 t面取り 長さ:2000 mm機械の重量 約:3 t総電力要件:kW コラム間の距離:mm機械の寸法 約:m圧力 35to最大曲げ長さ 2000mmアレスタ 背後駆動容量 4,5 kW重量 3000kg
pressure: 1 tStroke: 315 mmtable surface area: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tchamfer lenght: 4300 mmdistance between columns: 3700 mmram stroke speed: 100 mm/secworking feed: 8 mm/secreturn speed: 80 mm/secstroke: 175 mmtable height: 920 mmControl: DELEM DA 52 total power requirement: 11 kWweight of the machine ca.: 15000 kgdimensions of the machine ca.: 4800 x 1700 x 2850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
全般 メーカー:Transmatic タイプ: TS-3M 製作年:2007年 プレートサイズ:38 x 38 cm 最大圧力:600 g / cm2 温度設定:50 – 305°C 条件 条件:中古 機能的:テスト済みで完全に機能
pressure: 6,3 tthroat: 200 mmstroke: 200 mmdayligth: 600 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,78 tdimensions of the machine ca.: - mHydraulic Press 63 kNStroke 200 mm, Throat 200 mm, feed rate: down 165 (28) mm/s, up 510 mm/s. Wheight 780 kg.Workspace: Table 450 x 380Drive: 2.2Movie: https://www.youtube.com/watch?v=tcxXfKlrFLYThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 5 mmshaft length: 40 mmcutting lenght max.: 56 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mData on the machine type:Double-pressure rotor pressApplication: Screw productionMake: HilgelandYear of manufacture: 1990Max. wire diameter: 5 mmMax. shaft length: 40 mmMax. wire section length: 56 mmMax. output: 600 pieces/minMachine is fully operationalViewing possible by appointmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
数量1 中古押出プレスライン - 保管中 - 一度も設置されていません! メーカー:韓国メーカー 戦力:1650 UST 製造:2024年 タイプ:ダイレクトシングルアクション水平ショート ストロークバックローディングアルミニウム 油圧:レックスロスPLC:三菱 ビレットの直径:152 mm(6インチ)長さ:400 — 750 mm 容器サイズ:Φ157mm×800mm 出口穴サイズ:Φ180×250mm コンテナサイズ内径:164mm(6 ̋)長さ:700mm メインラムストローク:1200 mm 供給範囲:ローディングリフトシステムビレットプッ シュ誘導加熱炉 プレス冷却システムへの排出ビレット供給用ビレッ コンベア ホットソーランアウトテーブルダブルプーラースト ッチャーフィニッシングソー ダイス炉 エージング
pressure: 100 tstroke: 400 mmtable surface area: 920 x 560 mmdayligth: 900 mmdistance between columns: 300 mmHeads: 175x115 mmfeed down: 7,6 mm/secfeed up: 13,4 mm/sectotal power requirement: 4,0 kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: 1600x850x2450 mmDomestic equipments:- Stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material requirements - CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: 350 mmstroke: 130 mmstroke of worktool slide: 3070 Hub/minram adjustment: 100 mmram surface: 500x300 mmtable surface area: 1000x600 mmfeed - rapid adjustment: total power requirement: kWweight of the machine ca.: 9,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
圧力:20 tストローク:150 mm日光:700 mm全体のサイズ:670x870x1900 mm機械の重量約:200 kg国内設備:-安定した溶接構造-ハンドレバーによる 動-圧力計による圧力計-CEマー
pressure: 120 tstroke: 400 mmdayligth: 900 mmfeed down: 5,8 mm/secfeed up: 9,5 mm/secHeads: 200x125 mmtotal power requirement: 6 kWweight of the machine ca.: 1250 kgdimensions of the machine ca.: 1900x1000x2450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tstroke: 400 mmFrame Width: 450 mmcolumn daylight: 1300 mmcylinder diameter: 170 mmwork height max.: 900 mmFront light range: 1400 mmLateral light range: 450 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2600 kgdimensions of the machine ca.: 2500x1100x2800 mmAccessories / equipment:- stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material supports adjustable in height by cylinder- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tstroke: 400 mmdayligth: 900 mmHeads: 225x135 mmfeed down: 6,2 mm/secfeed up: 9,8 mm/sectotal power requirement: 6 kWweight of the machine ca.: 1.300 kgdimensions of the machine ca.: 1640x1000x2550 mmAccessories / equipment:- stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material supports adjustable in height by cylinder- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tstroke: 400 mmtotal power requirement: 4,0 kW: 7,4 mm/s: 11,5 mm/sHeads: 160x95 mmweight of the machine ca.: 725 kgdimensions of the machine ca.: 1560x850x2400 mmDomestic equipments:- Stable welded construction- Pressure cylinder laterally adjustable- Electric control via lever / manual over hand lever- Pressure gauge via pressure gauge- Material supports per cylinder in the height adjustable- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 60 tostroke: 400 mmdayligth: 900 mmHeads: 150x95 mmfeed up: 5,6 mm/secfeed down: 9,4 mm/secweight of the machine ca.: 700 kgtotal power requirement: 4 kWOverall size: 1460x850x2400 mmFurther information:stable welded constructionPrinting cylinder adjustableOperation electrically via shift lever / manually via hand leverPressure display by manometerHeight of material supports adjustable by cylinderCE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 105 tchamfer lenght: 3100 mmdistance between columns: 2600 mmtable width: 100 mmtable height: 750 mmControl: DELEM DA 65 dayligth: 200 mmworking feed: 0 - 10 mm/secreturn speed: 0-100 mm/secrapid traverse - up: max. 100 mm/secvoltage: 380 V / 50 Hztotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4 x 2,2 x 2,8 mEquipment:• CNC-control DELEM DA65 graphic video• manual back-off turning• upper and lower tool• 2 manual control / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 400 tthroat: 1140 mmstroke: 600 mmtable surface area: 2000x1000 mmPlate: 4000x1000x300 mmram head dimension: 2000x1040 mmCylinder: 300 mmDaylight: 650 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 3,9x4x4,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
圧力:75 tストローク:250 mm日光縦/横方向:800 x 215 mm日光:170-885 mm使用圧力:7,5-8.5バール機械の重量約:0,45 t寸法:1,2 x 0,8 x 2,1 mm油圧/空気圧ワークショッププレスシリンダーは横 向に移動できます空気圧フットペダルテーブルの さ調整用ウインチ2個プレスブロックCEマーキン
