サブカテゴリ
(第3カテゴリーレベル)
生産者：
(カテゴリ： 106)
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNmPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mmSLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 555 mm distance between columns (H-frame): 2060 mm passline opening (free passage in side columns): 1060 ...
pressure: 100 tthroat: 355 mmstroke: mmtotal power requirement: 11,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 tthroat: 220 mmstroke: 8-96 mmno. of strokes: 120 Hub/minram - range of adjustment: 50 mmtable surface area: 580x440 mmram surface: 305x170 mmhole in the table: 215x175 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 tthroat: 230 mmstroke: 4-80 mmno. of strokes: 120 Hub/minram - range of adjustment: 55 mmtable surface area: 695x455 mmram surface: 365x180 mmhole in the table: 220x180 mmtable height: 890 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: 300 mmstroke: 10-140 mmno. of strokes: 60 Hub/minram - range of adjustment: 60 mmtable surface area: 800x500 mmram surface: 430x230 mmhole in the table: Ø150 mmtable height: 860 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
圧力:25 throat:200 mmストローク:mm圧力:25 tno。ストローク数: 140 ハブ/分フレーム内の窓: 240 mmストロークの調整: 8...80 mmラム - 調整範囲: 50 mmラムの表面: 355 x 220 mmテーブルサイズ: 560 x 400 mmテーブル内の穴: 160 mm総電力要件: 3 kW機械の重量 ca.: 2,23 t機械の寸法 ca.: m- 距離テーブルスライド: 250 mmこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
Hämmerle油圧プレスブレーキが利用可能です。プレス :2000kN、作業長:2600mm、設置高さ:830mm、ストローク:26 5mm、スロート深さ:300mm、ラピッドトラバース:100mm/s 機械寸法X/Y/Z:約3750mm/2600mm/3600mm、重量:約16000kg。機 が機能していません。ドキュメントが利用可能です 。現地検品が可能です
圧力:200 tchamfer 長さ:3050 mm柱間の距離:2550 mmラムのストローク:274 mm制御:Cybelec ModEva Pac 総電力要件:kW機械の重量約:17.000 kg機械の寸法約:mこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
pressure: 62 tdistance between columns: . mmstroke: 360 mmTable area: 2500x580 mmdayligth: 400 mmdiameter - coniflex cutter: Zilinderdurchmesser 200 mm0: 200 barStud passage: 590 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mVideo: https://www.youtube.com/watch?v=gkuLoo7ABkcThe tech. Data aremanufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ...
pressure: 120 tchamfer lenght: . mmdistance between columns: 2550 mmstroke: 200 mmtotal power requirement: 13,2 kVANumber of working hours: 2500 htotal power requirement: kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
最大圧力容量:80 tストローク:500 mm表面積:960 x 810 mmスピンドルピッチ:72 コラム間の日光:950 / 540 mm通路:640 mm機械重量ab.:4500 kg機械の寸法約:2,0 x 2,0 x 3,85 m油圧クイック調整500mmフライホイール2000mm波をまっ ぐにするための4つのプリズムベース異なるサポー フレームこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
オファー 25200 仕様： - 圧力容量 200t - 作業幅3100 mm ●支柱間の通路 2600mm - テーブル幅 180 mm - 突起 300 mm - 設置高さ450mm - 送り速度 80mm/秒 - 作業速度9mm/秒 - 後退速度60mm/秒 - ラムストローク 120 mm - 調整範囲固定ストップ120 mm - 駆動 400 V / 18.7 kW - 必要なスペース 幅3300×高さ2950×奥行1900mm ●重量約 10500キロ -付き: -圧着深さ+梱包圧力の調整 -モット。ハンドホイール微調整付きバックゲージ - 4倍ユニバーサルダイ - 研ぎ工具 - 両手操作パネル、フットスイッチ
オファー 25227 仕様： - 圧力容量 150 t - 作業幅3600 mm ●支柱間の通路3150mm - テーブル幅 180 mm - 突起 250 mm - 設置高さ 325 mm - 送り速度 70mm/秒 - 作業速度 7mm/秒 - 後退速度60mm/秒 - ラムストローク 120 mm - 調整範囲固定ストップ120 mm ●モーター出力約 7.5キロワット - オイル充填約 300リットル - 必要なスペース 幅3850×高さ2300×奥行1600mm ●重量約 8700キロ - と: - スイベルアーム - ATL 550コントロール付きコントロールパネル - 圧着深さ+バックゲージ用 -モット。バックゲージ - クラウニング装置 - レーザーセーフ フィスラー - 4倍ユニバーサルダイ、分割砥石+鹿の足工具 - 両手操作パネル、フットスイッチ
パンチング圧力:約3,2 風袋圧力:8バールストローク:最大20 mm柱間距離:約250×200 mm機械の重量約:52 kgincl.さまざまなツール、写真をご覧くださいこの広 告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSを使 して作成されました
Pressure power: 6-8 barAir consumption: 8 l/Hubheight of stroke: 12 mm: 134 mmno. of strokes: 400 Hub/minpunching force max.: 3500 kpweight of the machine ca.: 80 kgSchüco pneumatic press for Schüco punching toolsArt. No. Schüco: 290 124manual includedvarious pressing tools included!tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 2830722 quick-release levers for secure and quick fastening of the press toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 tdistance between columns: 1220 mmmax. ram stroke: 600 mmdistance table/ram, max. stroke up, adjustment up: 1000 mmtable surface area: 1600 x 1200 mmdie-cushion pressure inside the table: 320 tstroke of drawing cushion in table: 150 mmdrawing cushion surface in table: 750 x 812 mmdie-cushion pressure in pusher: 180 tstroke of drawing cushion in pusher: 100 mmdrawing cushion surface in pusher: 750 x 625 mmram surface: 1600 x 1200 mmtable height over floor: 800 mmfeed down: 665 mm/secfeed up: 530 mm/secworking feed: 34 - 100 mm/secquantity of oil: 2000 lpower capacity: 180 kWweight: 40 tdimensions of the machine ca.: 3,2 x 2,4 x 7,5 mby using oil-hydraulic drive, hydraulic and electric controlUVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinetOur list price is WITHOUT starting the machine,just as it isThe da ...
pressure: 40 tdistance between columns: 495 mmstroke: 150 mmdistance table/ram, max. stroke up, adjustment up: 300 mmtable surface area: 490 x 400 mmhole in the table: 50 mmtable height over floor: 950 mmcolumn travel -side: 155 mmram surface: 150 mmfeed down: 480 mm/secfeed up: 480 mm/secworking feed: 20 mm/secoil volume: 115 lpower capacity: 7,5 kWweight: 2,2 tdimensions of the machine ca.: 1,35 x 1,00 x 2,21 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tthroat: 280 mmstroke: 8 - 112 mmno. of strokes: 30 - 120 Hub/mindistance table/ram, max. stroke up, adjustment up: 500 mmtable surface area: 840 x 580 mmhole in the table: 150 mmtable height over floor: 910 mmpassage to the back: 640 mmram surface: 560 x 300 mmram adjustment: 80 mmpower capacity: 7,5 kWtotal power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 1,4 x 2,3 x 3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 200 mmstroke: 8 - 80 mmno. of strokes: 180 Hub/mindistance table/ram: 330 mmtable surface area: 550 x 400 mmhole in the table: 60 mmtable height over floor: 800 mmtable height over floor: 800 mmpassage to the back: 200 mmram surface: 355 x 220 mmram adjustment: 50 mmpower capacity: 2,5 kWtotal power requirement: kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1,2 x 1,8 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
シート幅:3000 mmプレートの厚さ:16 mmプリベンディング:/機械の重量 約:15 機械の寸法 約:mこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
pressure: 125 tno. of strokes: 55 Hub/minstroke: 20 - 160 mmtable-size: 970 x 660 mmmax. ram stroke: 160 mmmin. ram stroke: 20 mmthroat: 340 mmtotal power requirement: 11 kWweight of the machine ca.: tdimensions of the machine ca.: 1,5 x 3,0 x mWith motor, gear reduction, wheel protection, air friction clutch, additional brake(Make Desch) and safe control according to UVV,Mech. Overload protection in the ramTwo-hand operation, control cabinetThe price is ex stock as the press is, is, or is.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tthroat: 280 mmstroke: 8 - 100 mmno. of strokes: 65 Hub/minram adjustment: 63 mmtable surface area: 620 x 500 mmdistance table/ram, max. stroke up, adjustment up: 415 mmhole in the table: 230 mmtable height over floor: 800 mmram surface: 310 x 255 mmpower capacity: 5,5 kWtotal power requirement: kWweight of the machine ca.: 3,95 tdimensions of the machine ca.: 1,20 x 1,80 x 2,40 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
数量1 中古アルミ押出プレスライン コードアルミニウムHE9 6063 Mfc.:インドのメーカー 製造:1978 PLC油圧 - アップグレードは2005年に行われました! プレスの総力:680 MT、750 UST 押出圧力:210バール ビレット直径:5インチ、121 mmビレットのインチあたりの重量:0.76 kg /インチ 供給範囲:丸太加熱炉ホットシャー押出プレス オーバーヘッドプーラー アンダーベッド冷却システム ランアウト冷却ベッド ベルトコンベヤーストレッチャー切断機ダイオーブ ン コンベヤーテーブル 最終包装用コンベヤー
plate width: 3200 mmplate thickness: 83 mmpre-bending: 72 mmroll diam. toproll: 700 mmroll diam. bottom roll: 650 mmside roll diameter: 550 mmdistance between columns: 3300 mmroll drive: 93,2 kWturning speeds: 2 - 4 m/mintotal power requirement: - kWweight of the machine ca.: 78 tdimensions of the machine ca.: 9 x 3,3 x 3,4 m4 –Roll Bending Machine- 4 roll Pinch bending- Pre-bending- Tilting function-- Hydraulic front bearing tilting speed: 450mm/min-- Hydraulic tilting of top roll: 250mm/min- CE2 Units availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
新機能
pressure: 400 tdistance between columns: 600 mmstroke: 600 mmtable-size: 3000 x 1500 mmtravel x / y: 2200 x 900 mmworking feed: 7 mm/sectank capacity: 66 lworking pressure: 30-250 bartotal power requirement: 18,5 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3500 x 3500 x 3700 m2. STANDARD EQUIPMENTFRAME- Welded steel frame- Frame and plates are precision-milled using a CNC milling machine- Chrome-plated cylinder- Worktop with threaded holesHYDRAULICS- Bosch Rexroth hydraulic pump- Hydrapack or Badestons hydraulic directional control valve- Hydraulic block in accordance with EN standards- 1000-liter hydraulic oil tank- Pressure adjustment via pressure transmitter/regulatorELECTRICS- Control cabinet in accordance with EN standards- All cables are labeled and clearly arranged- All electrical components are from SiemensCONTROL PANEL- Stroke control in any position- X, Y, a ...
古いPromecamプレスブレーキが利用可能です。押圧力:1 00t、曲げ長さ:4000mm、スロート:400mm、ストローク:100mm 、設置高さ:300mm、重量:約8500kg。立入検査が可能です
pressure: 130 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmControl: Cybelec weight of the machine ca.: 11.600 kgdimensions of the machine ca.: 4000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
販売中: BRUDERER BSTA 50USL 高速スタンピングプレス 自動ストリップフィーダー付 BBV 190 500 kN |100–1120 SPM |全自動 |スイスの最高品質 技術的なハイライト: 公称力:500 kN ストローク速度:毎分100〜1120ストローク 労働時間:41000時間 メインモーター:22kW 制御電圧:24V DC 電源接続:400V / 50Hz / 62kVA 調整可能なストローク:16/19/25/32/38/44/51 mm シャットハイト調整:64mm 作業寸法: 最大工具取り付け幅:1100 mm ストリップパス幅:最大256 mm ラム面積:980 × 420 mm テーブルエリア:1080 × 650 mm ストリップエントリー高さ調整可能:60–140 mm 最大ストリップ幅:120 mm 最大送りピッチ:85 mm 最大材料厚さ:4 mm 送り角度:180度 機械寸法(BBV 190を使用): 機械設置面積(L × W × H):2407 × 1278 × 3150 mm ...
