フライス盤 中古 販売のため (2,542)

GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 3,56 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system X,Y,ZDir ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)43 NmMax. torque64 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant ...

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)Tool Clamping BT 40Tool Clamping BT 40 for pull-studs DIN 69872 (differently from standard)Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperBT 40 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)Tool Clamping BT 40Tool Clamping BT 40 for pull-studs DIN 69872 (differently from standard)Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface1400 x 600 mmDimensions (L x W x H)2,74 x 2,74 x 2,86 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z1100/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.6950 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsMaximum load (table centre)1000 KgDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,5 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsDrive power (40% DC)13 kWMax. torque83 NmTorque (100% DC)57 NmDrive power (100% DC)9 kWSpeed max.12000 rpmTable surface1400 x 560 mmWeight approx.6050 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 20 bar with chip conveyorProduction Packa ...

GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,6 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque121 NmTorque (100% DC)84 NmDrive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmMaximum load (table centre)1000 KgWeight approx.6200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Optio ...

GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,5 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.6050 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 3 with Chip ConveyorProduction Package 3 Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 250 l (left) - Bed and ATC arm flushing via M-Function - Coolant spray gun for swarfPrep. 4th axis EA 510.L indirect (Heidenha ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical450 mmTool changerType of magazineChain Number of tools30 Type of gripperDouble gripper Floor space/WeightDimensions (L x W x H)2,92 x 2,42 x 2,88 (3,0) mWeight approx.9600 KgHSC70 5-Axis SpecificationHSC70 with 5-Axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range B-axis +20/-110°; C-axis 360° table load max. 500 kg // 1102.31 lbs absolute measuring systems incl. permanent  ...

Key data: 20000 mm, 7900 mm, 2500 mm

CNCガントリーフライス盤 ヴァルドリッヒ・コーブルク パワーテック4500 1999年にシーメンス840C製CNC制御で製造 X 20,000 mm(縦ガントリー) Y 7,900 mm(ミリングラムの横方向移動) Z 2,500 mm(フライスラムの垂直移動) 幅2,500 mm(横方向の垂直ビーム) 支柱間の距離 4,380 mm スピンドルからテーブルまでの距離最大4,000 mm 2023年にスピンドルのオーバーホール スピンドルモーター出力 105 KW スピンドル回転数2〜2,500rpm(2段ギアボックス) トルクS1 9,000 Nm スピンドルホルダー ISO 60 / ISO 50 405速工具交換器 5つのミリングヘッド ユニバーサルミリングヘッド自動インデックス1 / 1 オファー番号 V(F)-7155

Number of axes: 5, max. spindle speed: 50,000rpm, spindle taper: HSK E25, working area dimensions: 410x294x210mm, table dimensions: 450x300mm, T-slots: 12mm, spacing: 50mm, max. workpiece weight: 100kg, feed rate: 0-42,000mm/min, tool changer positions: 18 (linear), max. current consumption: 18A, connected load: 10kVA, length: 1995mm, width: 2480mm, height: 2080mm, weight: 3.2t, operating hours: 57,869h, spindle hours: 1,797h, an on-site inspection is possible.

This 5-axis CHIRON MILL FX 1250 was manufactured in 2015. It has a mass of 9700 kg and operates at a voltage of 400 V with a full load current of 63 A. If you are looking to get high-quality machining capabilities, consider the CHIRON MILL FX 1250 vertical machining centre we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMC 65 V was manufactured in 2003. It features a spindle speed of 18,000 rpm and a tool changer capacity of 30 positions, enhancing its operational efficiency. The machine is equipped with a Heidenhain TNC 426 control system and optional equipment such as tool measurement and an automatic 3D probe. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 65 V vertical machining centre we have for sale. Contact us for further details.

This 5-axis JOBS Jomach 241 gantry milling machine was manufactured in 1999. It features an impressive X-axis travel of 3,400 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 1,250 mm. The worktable size is 3,000 x 1,500 mm with a load capacity of 12,000 kg. If you are looking to get high-quality milling capabilities, consider the JOBS Jomach 241 machine we have for sale. Contact us for further details regarding this machine.

中古機 DMF200/8 機械タイプ:ユニバーサルミリングセンター モデル番号:D MF200/8 製造元:DMGMORI(ママもリ) 制御:シーメンス840D SL搭載CELOS操作 製造年:2023年 所在地:ドイツ 装備: - トラベリングカラムミリングマシン DMF 200/8 - NCスイベルフライスヘッド(B軸) - モータースピンドルSPEEDMASTER® - 工具ホルダー SK40 DIN - スピンドル回転数 20 - 15,000 rpm 21 kW/16 kW - 40工具用のチェーンマガジン、 - チップコンベヤー(スクレーパーベルト) - 回転テーブルを内蔵した固定テーブル - 内部冷却水供給:40バール/600ll、ペーパーベルトフィ� ��ター付き - オイルおよび乳剤ミストセパレーター - スピンドル中心部に空気を吹き込む - 赤外線プローブ PP60光学 - 3D クイックセット -  ...

製造年:2010年、最高の状態! シーメンス・コントロール スピンドル 18000 rpm 10610 スピンドルアワー 30工具用のツールチェンジャー IKZ エル。手車 チップコンベヤ�

中古のDMU 40eVoリニア 機械タイプ:CNC 5軸フライリングセンター モデル:DMU 40eVoリニア 製造元:DMGMORI(ママもリ) 制御:CELOS Siemens 840D SL 作動 製造年:2022年 #001431 所在地:ドイツ 技術データ X軸の移動範囲は約400mm Y軸 約400 mm Z軸は約375 mm C軸360 B軸 -5/+110 ワークピース直径約450mm ワークピースの重量最大約250 kg 最大回転数:約20,000rpm スピンドルモーター 約35/25 KW 工具の位置数は約120 急速なトラバース速度は約80 m/分 ピックアップテーパー(約HSK63) 追加軸は約2本の4/5軸 圧縮空気バー、L/min、約5、300bar、L/min 消費電力:約32 kVA フットプリント L x W x H 約 2.05x2.85x2.53 m (パレットプールなし) 機械重量:約7,500 kg。 施設 DMU 40 eVoリニア用ダイナミックパッケージ - � ...

This 5-axis HERMLE C 600 U was manufactured in 2000. It has a net weight of 6500 kg and includes a Knoll unit with internal cooling. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U vertical machining centre we have for sale. Contact us for further details.

This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details.

This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, its ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine.

重要 - お読みください ご興味のある方はお電話でご連絡ください。機械の� ��所はご要望に応じて できれば現地で販売し、買い手が分解と輸送を手配� ��ます オーストリアのEMCO社製の高精度工具フライス盤、モ デルFB-5(Emcomat)が販売中です。この産業用機械は、優 れた形状と信頼性により、工具製造、試作、訓練工� ��で高く評価されています。 フライス加工やドリル作業において最大限の汎用性 を持つユニバーサルテーブルおよび水平・垂直スピ� ��ドルを装備 豊富なアクセサリーパッケージ(各種カッターホル� �ー/SK40テーパー;クランプ装置などを含む)

This 3-axis FAMUP MCX 1000 vertical machining centre was manufactured in 1997. It features a longitudinal travel of 1,100 mm, transverse travel of 480 mm, and vertical travel of 470 mm. The machine includes a tool magazine capacity of 30 positions and a maximum spindle speed of 8,000 rpm. If you are looking to get high-quality machining capabilities, consider the FAMUP MCX 1000 vertical machining centre we have for sale. Contact us for further details.

X軸移動:1,050 mm Y軸移動:550mm 移動距離Z軸:520 mm スピンドル回転数(最大):12,000 rpm 全高:2,778 mm 全幅:2,977 mm 全長:3,635 mm 総重量:6,700 kg ワークピースの重量(最大):800 kg - 制御:シーメンス828D OPERATEとShopMillを含む - マガジンスロット数:30 - 工具ホルダー:BBT 40 - 内部冷却:20バール - 工具重量:最大8 kg - 工具交換時間:3秒 - チップ間時間:5.5秒 - Blumプローブ ZX-Speed IR - Blum 3Dタッチプローブ TC-52 LF

Key data: 2800 mm, 1000 mm, 1000 mm

CNCベッドミリングマシン 製造元:ザイヤー 製造年 1989年 制御 ハイデンハイン TNC155 モニターはすでに交換済みです テーブルサイズ:800 x 3000mm トラベル X/Y/Z 2800/1000/1000 24ウェイツールチェンジャー 工具ホルダー SK50 プログラムの上で頭を回す 機械は100%正常に機能しています。 機械はザールラント・イリンゲンの現場から販売さ� ��ています。 積み込みは追加料金で当社で行いま�

This 3-axis SW BA 40 vertical machining centre was manufactured in 2001. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 630 mm, and Z-axis travel of 630 mm. The machine is equipped with a powerful spindle speed range of 20 - 7,500 rpm and a tool magazine with 60 slots. If you are looking to get high-quality machining capabilities, consider the SW BA 40 machine we have for sale. Contact us for further details.