フライス盤 中古 販売のため (2,542)

Key data: 880 mm, 630 mm, 630 mm

CNCユニバーサル – フライス&ドリリングマシン デッケルMAHO DMU 80 T ハイデンハイン iTNC 530 のトラック制御付き メイクの年:2002年 移動速度:X 880 Y 630 Z 630 速度範囲:0 – 18,000 rpm 無限可変(SK 40) 以下のアクセサリー付き: NC回転テーブル0 700mmをリジッドアングルテーブル1250 mm x 700 mm に統合 クランプ面 32マガジン位置の垂直型工具チェンジャー(SK 40) スライドドアと室内照明を備えたフルプロテクショ� ��キャビン 電子手押しホイール 動作モード3 + 4 スパイラルスクリューコンベヤー 冷却材のセットアップ 3ピースの高さ調整式マシンシューズ スピンドルオイルクーラー 制御キャビネット冷却ユニット(リッタル) 操作指�

売りに出されているMAHO600Eは、緊急委員会がエラー� �報告したため現在運行されていません(ERR 0 23,M 02)�

• Table with 7 T-slots and an attached ALLMATIC machine vice, jaw width: 160 mm• Incl. 3-axis digital readout manufactured by HEIDENHAIN

• Table with 7 slots• Incl. 3-axis digital readout manufactured by HEIDENHAIN

Attention: without the machine vises seen in the photos!• incl. three axis digital read out• incl. universal milling head

This 4-axis HELLER MCI 16 vertical machining centre was manufactured in 2005. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 40 pockets. The machine has a total connected load of approximately 69 kVA and weighs 9,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 vertical machining centre we have for sale. Contact us for further details.

This 4-axis HELLER MC 16 was manufactured in 2001. It features a generous X, Y, and Z-axis travel of 630 mm each, along with a tool magazine capacity of 80 pockets. The machine is equipped with a rotary table capable of handling a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details.

This 4-axis HELLER MCI 16 was manufactured in 2004. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a spindle power of 38 kW. The machine includes a tool magazine capacity of 40 pockets and a rotary table with a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 horizontal machining centre we have for sale. Contact us for further details.

This 5-axis DMG MU 70 ECO Mill was manufactured in 2015. It features a maximum spindle speed of 12,000 rpm and a robust integrated NC swivel rotary table. Weighing 7,800 kg, this machine is equipped with an external chip conveyor and a coolant/filtration tank unit. If you are looking to get high-quality machining capabilities, consider the DMG MU 70 ECO Mill vertical machining centre we have for sale. Contact us for further details.

This 3-axis HEDELIUS BC 60 was manufactured in 1999. It features a robust machine structure with a moving column and dual-workspace setup, ensuring efficient operation. The CNC control unit is Siemens (SINUMERIK), and it includes additional equipment such as a chip conveyor and hydraulic/coolant unit. If you are looking to get high-quality machining capabilities, consider the HEDELIUS BC 60 vertical machining centre we have for sale. Contact us for further details.

販売中は、2006年に製造されたイタリアの著名メーカ ーFOM製コピー製粉機です。 機械は工場でオーバーホールされました。オーバー� ��ールの一環として、機械は完全に分解され、すべ� �の部品が個別に洗浄されました。支持板は研磨され 、アルバメッキが施されました。他にも多くの部品� ��再ア鉛メッキされました。一部の部品は再塗装さ� �ました。エンジンのベアリングやフライスピンドル のベアリングも交換されました。さらに、新しいベ� ��トとガスストラットが取り付けられました。 メーカーによる技術的特徴: - 2倍速のスピンドル - 工具交換を容易にするクイックロックスピンドル - 水平クランプ装置 - テンプレートのコピー - ダイビングス� ...

x-travel: 800 mmy-travel: 340 mmz-travel: 460 mmControl: Fanuc total power requirement: kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

デジタル表示とベースフレームを備えたPaulimot SX4フライス盤 販売中は、整備されて完全に機能するパウリモットS X4フライス盤です。この機械は作業場、模型製作、� �作機製造、さらにはホビーや小規模な量産作業にも 理想的です。 安定した構造とデジタル表示により、SX4は鋼鉄、ア� ��ミニウム、プラスチックなど多くの素材で精密か� �快適に作業を可能にします。 装備: パウリモ SX4 フライス盤 デジタル表示/デジタル測定システム 安定機械の下部構造 無段速制御 掘削およびフライス機能 ベースフレーム 使用準備完了 技術データ: テーブルサイズ:約820 x 240 mm 旅行: X軸:450 mm Y軸:250 mm Z軸:320 mm スピンドルホルダー:SK30 無段速制御 電源供� ...

This 3-axis Emmegi Phantomatic T3 was manufactured in 2011. It features a power rating of 7.5 kW and operates at a voltage of 400/3 V. With a machine weight of 1950 kg, it is designed for durability and efficiency. If you are looking to get high-quality machining capabilities, consider the Emmegi Phantomatic T3 vertical machining centre we have for sale. Contact us for further details.

This 5-axis POSmill H 500 U was manufactured in 2020. It features a Heidenhain TNC 640 control system and includes additional equipment such as a chip conveyor and an external cooling unit. With a nominal power of 60 kVA and extensive operational hours, this machine is well-equipped for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the POSmill H 500 U vertical machining centre we have for sale. Contact us for further details.

垂直フライス盤 ヴィクトル 1 1/2 VA BJ 1976�

垂直フライス盤 Mark ACE BJ 1998�

速度:毎分12,000回転 フットスイッチによる空気圧材料クランプ 最小量噴霧装置 ミリング面積:300 x 120 mm ストローク:115 mm 重量:約200 kg

ミリング機械センター First MCV 1100 BJ 2011

フライス加工センター トゥリ・リック M 800 LL BJ 2018

ミリングセンター マイクロカット リック M800 LL BJ 2012

ミリングマシニングセンター リードウェル V30if BJ 2016

ユニバーサルミリングマシン デッケル マホ DMU 50 BJ 2004

A CNC universal bed-type milling machine is offered. Table setup area: approx. 1300mm, operating hours: approx. 100h, spindle hours S1: 54h, program run time: 159h, control: HEIDENHAIN TNC 320, operating voltage: 400V, total rated current: 50A, fuse rating: 63A, spindle speed: 32-1400rpm, control: HEIDENHAIN TNC 320. Equipped with full enclosure, coolant system, work area lighting, chip guard. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3910mm/2700mm/2800mm. Inspection by prior arrangement is possible.

Travel X/Y/Z: 850mm/435mm/210mm, vertical head adjustment: approx. 590mm, table dimensions X/Y: approx. 1570mm/500mm, max. table load: 250kg, spindle taper: Fehlmann SF32, max. spindle speed: 7100rpm, spindle power: approx. 5kW, drilling capacity in steel: 30mm, tapping capacity in steel: M20, control: Mach3 with touchscreen PC, weight: approx. 3000kg. The machine was subsequently retrofitted with a Mach3 control. An on-site inspection is possible.

This 5-axis STAMA MC 734M was manufactured in 2006. It features a travel range of 800 mm in the X-axis, 520 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 48 + 90 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 734M vertical machining centre we have for sale. Contact us for further details.

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - ...

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,82 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring syste ...

GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system X,Y,ZDir ...