のこぎり 中古 販売のため (1,262)

: neu : ca. 10 Wochen ab Auftrags : Italien : 8680 €: 167.52 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 370x140 mm: rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm: 1550 mm: 1400 mm: 1900 mm: 353 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10860 €: 208.51 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 370x140 mm: rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm: 1650 mm: 1200 mm: 1850 mm: 390 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10370 €: 199.1 €: Schwenkrahmen : 3120 mm: 35/70 m/min: 280 mm: 240 mm: 350x140 mm: rund 230 mm, quadrat 200 : rund 150 mm, quadrat 130 : rund 200 mm, quadrat 170 : 830 mm: 1550 mm: 1400 mm: 1750 mm: 420 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentdigital readout for mitre cutsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 €: 212.54 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1400 mm: 1800 mm: 438 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 14110 €: 270.91 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1600 mm: 1800 mm: 488 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 9080 €: 175.24 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm: 1600 mm: 1400 mm: 1950 mm: 356 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 11640 €: 223.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm: 1650 mm: 1200 mm: 1900 mm: 400 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.Optional equipmente: adjustable vice pressure EUR 330,--The data for this ad was created with ModulMWS - the software solution of Lo ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 €: 490.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 (PLC) m/min: 20-100 (CNC/Touch) m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm: 835 mm: 0.37 kW: 0.12 kW: 3220 mm: 2050 mm: 1900 mm: 1090 kgVERSION PLC: adjustment of material feed by handwheel, counter and limit switchVERSION CNC:feed lenght and numbers by CNC (99 progamms)VERSION TOUCH: as CNC but with 7", touchscreen for easier operationautomatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declampautomatic feed 800 mm/strokechip conveyer (CNC/Touch)variable cutting pressureMachine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch)cutting fluid systemautomatic saw blade breakage detectionhydraulic vicessuggested max. diam. in automatic mo ...

saw blade diameter: 315 mmcutting diameter: 100 mm: mmcutting speed: 40 / 80 U/mintotal power requirement: 1,2 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 0,8 x 0,6 x 1,65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet length: 5600 mmMachine number: 83509Table dimensions: 900 x 900 mm Auction-ID: A7-49089-177

Machine number: 831097Blade length: 5600 mmTable dimensions: 900 x 900 mmincl. lot of saw blades Auction-ID: A7-49089-524

Machine number: 1042455Cutting length: approx. 3000 mmincl. right roller conveyorRoller conveyor length: approx. 2000 mmRoller conveyor width: approx. 350 mmRoller conveyor left Length: approx. 3000 mm and width: 350 mm Auction-ID: A7-49089-156

cutting diameter: 15 - 300 mmsaw band length: 4640 mmcutting width: 1,3 mmcutting range - square -: 300 x 300 mmfeed length: 600 mmfeed length: multiple: 5400 mmdimensions of saw-band: 4640 x 41 x 1,3 mmcutting speed: 19 - 130 m/minmin. cut-off length: 10 mmheight of material-table: 700 mmtotal power requirement: 7 kWweight of the machine ca.: 2,7 tdimensions of machine L x W x H: 2,35 x 2,34 x 1,95 mAccessories: chip conveyor, DRO for cutting length, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 290 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: flat: re 240 x 150 mmcapacity 45 degrees: round: re 240 mmcapacity 60 degrees: flat: re 150 x 180 mmcapacity 60 degrees: round: re 150 mmcapacity 45 degrees: flat: li 240 x 100 mmcapacity 45 degrees: round: li 240 mmturning speed range:: 20 - 100 m/minsaw band length: 3100 x 27 x 0.9 mmpower capacity: 2.4 kWweight of the machine ca.: 570 kgrange L-W-H: 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features:- Semi-automatic electro-hydraulic band saw (INDUSTRIE)- Suitable for single-piece and small-batch production- Large, ball-bearing-mounted cast-iron rotary table For miter cuts from 45° left to 60° right- Hydraulic cutting feed Material clamping - Continuously variable band speed (Model F)- Ergonomic control panel- Micro-spray lubrication system (spray oil ...

cutting diameter: 300 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: flat: re 300 x 280 mmcapacity 45 degrees: round: re 300 mmcapacity 60 degrees: flat: re 190 x 200 mmcapacity 60 degrees: round: re 200 mmcapacity 45 degrees: flat: li 270 x 200 mmcapacity 45 degrees: round: li 270 mmturning speed range:: 20 - 100 m/minsaw band length: 3660 x 27 x 0.9 mmpower capacity: 2.4 kWweight of the machine ca.: 650 kgrange L-W-H: 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features:- Semi-automatic electro-hydraulic band saw (INDUSTRIE)- Suitable for single-piece and small-batch production- Large, ball-bearing-mounted cast-iron turntable For miter cuts from 45° left to 60° right- Hydraulic feed mechanism Material clamping - Ergonomic control panelâfront right, swiveling - Coolant system- Operatoration manual Semi-auto ...

Machine number: 4818Operating voltage: 400 VFrequency: 50 HzRated current: 1.5 AGrinding wheel diameter: approx. 250 mm Auction-ID: A7-49089-377

saw blade diameter: 550 mmUnder-table saw for aluminum and PVCHydropneumatic saw blade feedTwo-hand operationMinimum-quantity lubrication systemTable rotates on both sides, with locking positions at +/-45° and +/-60°Mitre cuts up to 60° on both sidesFull protective guardvery good condition!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 280 mmCutting height: 150 mmMotor output: 2 x 4,0 kWsaw blade: 420 x 30 mmCutting length: 6000 mmspeeds: 2800 U/minair pressure: 7 barweight of the machine ca.: 1750 kgdimensions of the machine ca.: 7550 x 1600 x 1450 mmFurnishing:- Control E 255- Extraction ESTA DUSTOMAT-22 Bj. 1998- roller conveyor- 2x saw blade 120 x 4.0 x 30 Z96The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mmsaw band length: 3900 mmtotal power requirement: 3 kWweight of the machine ca.: 0,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 45210 €: 863.51 €: Schwenkrahmen : 3120x27x0,9 mm: 20-100 m/min: 280 mm: 240 mm: 310x240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 2800 mm: 2000 mm: 1820 mm: 1200 kgCNC control with 7", touchscreen for following functions:feeding length, pieces and rotation of the bow for mitre cuttingautomatic feed 1000 mm / strokevariable cutting pressuremachine with speed variatorcoolante equipmentmotorizes chip brushchip conveyerautomatic saw blade breakage detectionhydraulic clamping vicesRecommended max. diameter of solid material in automatic mode: 150 mmuser manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 61300 €: 1158.57 €: Doppelsäulenführung : 6000 x 41 x 1,3 mm: 20 - 100 m/min: 560 mm: 560 mm: 600 x 560 mm: 810 mm: 2.2 kW: 5.5 kW: 0.12 kW: 3250 mm: 2200 mm: 2350 mm: 4500 kgHydromechanical band tensionContinuously variable bandspeed (inverter)Linear guideFeed vice with servo drive with 700 mm stroke or 9.999 mm for multi-strokeControl panel with touchscreen (50 cutting lengths / 30 programs)Planetary gearboxSaw pressure adjustmentBand deflection sensorCoolant deviceChip brushOptical height adjustmentOPTIONEN: Hydraulicupper clamping Micro cooling unit Roller table3 m Laser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 8500 €: 164.05 €: 350 mm: 350x32x63 mm: 45 / 80 U/Min: 45 °: 45 °: rund 115 mm / quadratisch : rund 110 mm / quadratisch : rund 110 mm / quadratisch : 5.85 kW: 1100 mm: 1000 mm: 1400 mm: 300 kgSemi-automatic circular saw designedHigh production rates, ideal for small and mid productionHeavy duty gearboxCast iron structureFoot switch actuationHydro-pneumatic operation of saw head smoothes descent for optimum cutPneumatic vice2 cutting speedsAdjustable head stroke according to the dimensions of the material which has to be cutPiece counter45° right to 45° left cuttingsaw blade not includedOPTION:saw blade Dm. 350 mm € 180,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 46700 €: 891.97 €: Doppelsäulenführung : 8200x41x1,3 mm: 20-100 m/min: 810 mm: 750 mm: 910x750 mm: rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm: 4 kW: 0.12 kW: 4020 mm: 1600 mm: 2450 mm: 3970 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frameuser manual in GERMAN or ENGLISHOPTIONS: Hydraulic vertical clamping Micro cooling unit Laser linerThe data for  ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 30900 €: 590.19 €: Doppelsäulenführung : 6000x41x1,3 mm: 20-100 m/min: 560 mm: 560 mm: 570x560 mm: 590 mm: 1.1 kW: 4 kW: 0.12 kW: 500 mm: 1050 mm: 2050 mm: 2242 kgNC controldouble column band saw3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninverterlinear wayoptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchgearboxuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 12680 €: 243.46 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 350x140 mm: rund 230 mm, quadrat 200 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 830 mm: 1600 mm: 1550 mm: 1750 mm: 460 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 060077 : prompt, Zwischenverkauf v : Türkei : 14200 €: 272.64 €: 1 : 1 : Schwenkrahmen : 4160x34x1,1 mm: 15 - 120 m/min: 320 mm: 320 mm: 450x320 mm: rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 300 : rund 230 mm, quadrat 220 : 860 mm: 0.37 kW: 2.2 kW: 0.12 kW: 2230 mm: 1150 mm: 2140 mm: 1030 kgDouble mitre cuttingInverterSaw blade 34Hydraulic viceHeavy duty gearboxHydromechanic blade tensionSaw band brushDigital read out for mitre angleCoolant equipmentOperating manual in English or GermanOPTIONS:Roller tables and band saw blades on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 €: 569.18 €: Schwenkrahmen : 3660x27x0,9 mm: 15-120 m/min: 320 mm: 320 mm: 350x320 mm: rund 170 mm, quadrat 150 : rund 260 mm, quadrat 220 : rund 320 mm, quadrat 280 : 740 mm: 1.1 kW: 2.2 kW: 1 kW: 0.12 kW: 2120 mm: 2100 mm: 1810 mm: 1810 kgNC control panelservo feed with ballscrew spindleshydraulic vicehydromechanical blade tensioninvertercoolant pumpsaw bladeblade brushsecurity switchheight adjustmentuser manual in GERMAN or ENGLISHOPTION:hydraulic blade tentioningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 34400 €: 657.04 €: Doppelsäulenführung : 4380x34x1,1 mm: 20-100 m/min: 325 mm: 325 mm: 400x325 mm: rund 325 mm, quadrat 325 : rund 300 mm, quadrat 265 : rund 190 mm, quadrat 190 : 655 mm: 1.1 kW: 2.2 kW: 0.12 kW: 2130 mm: 2150 mm: 1650 mm: 1860 kgNC controldouble column band saw on linear guidelines3° cutting angleblade brushcontrol panelhydraulic feeding vicehydraulic vicehydromechanical blade tensioninginverteroptical height adjustmentproximity switch for sensing blade slippagematerial limit shaftpressure adjustmentcoolant pumpsaw bladesecurity switchuser manual in GERMAN or ENGLISHOPTIONS:hydraulic top clampingmicro coolant equipmentlaser cutting lineALTERNATIVE:model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 38.900,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 20100 €: 385.92 €: Doppelsäulenführung : 4800x34x1,1 mm: 20-100 m/min: 380 mm: 380 mm: 520x380 mm: rund 300 mm, quadrat 300 : 590 mm: 0.55 kW: 3 kW: 0.12 kW: 2850 mm: 930 mm: 1660 mm: 1330 kg2° inclined bandblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverter for continous adjustable cutting speedlinear guidesoptical height adjustmentpressure adjustmentcoolant pumpsaw bandsecurity switchheavy duty gearbox1,2 meter roller tableuser manual in GERMAN or ENGLISHOPTION:turn table for mitre cutshydraulic top clampingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.