Type DP 4000 Special facing lathe which has been converted to Siemens CNC for making internal conical threads Chuckdiameter: 3700 mm Siemens 840D Thread inserts are included, these are used to test if the thread has been correctly turned on the workpiece.  ...

• maggiori informazioni

Tornio a sommità piatta con telaio a piastre (tornio per impieghi gravosi) - La macchina è stata revisionata in Italia nel 2014 e stoccata direttamente - nuova impianto elettrico (quadro elettrico, cablaggio) - Diametro massimo di tornitura sul carrello del letto 4000 mm - Diametro massimo tornibile 5000 mm - Lunghezza massima di tornitura: 22000 mm - Gamma di velocità piastre frontali 0,9 - 56 1/min - Diametro piastra frontale 4420 mm - Potenza motore principale 30 kW - Coppia max. alla piastra frontale 61803 Nm - Peso massimo del pezzo tra le punte: 20 t - Peso massimo del pezzo in volo: 12,5 t -due scivoli letto con lunghezza girevole di 4500 mm  ...

Larghezza centrale: 3000 mm Diametro di rotazione: 1800 mm sopra il letto / 2800 mm sopra il pavimento Peso del pezzo: 8.000 kg max. Mandrino a ganasce: Ø 1800 mm Gamma di velocità: 1,8 - 180 giri/min. Passaggio mandrino: 220 mm Visualizzatore digitale a 3 assi: Easson ES-14 Dotate: - Contropunta motorizzata - Utensili vari -Istruzioni Paese di origine: Germania Potenza del motore: 34 kW Peso macchina: 21.000 kg

turning diameter over bed: 5000 mm turning diameter over slide rest: 4000 mm turning length: 22000 mm total power requirement: 36 kW weight of the machine ca.: 53,5 t dimensions of the machine ca.: m Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After ...

faceplate diameter: 3500 mm turning diameter: 4000 mm centre distance: 16000 mm turning speeds: 1,4-74 U/min Rest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kg max. workpiece weight between centres: 18000 kg Plate area: mm total power requirement: 31 kW weight of the machine ca.: 50 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro di tornitura: 6400 mmDisfondo del centro: 18000 mmForo mandrino: 220 mmNumero delle vie guida del letto: 0Peso tra i centri massimo: 80000 kg MACH-id   4069 MAKE       Zerbst Germania TIPO         DXP 5 ANNO         1987 Indicazioni Oscillazione nello spazio    6400 mm Distanza tra le punte    18.000 mm Peso del pezzo      80.000 kg Alesaggio mandrino    220 mm Velocità mandrino / gamme    22,4 Rpm Potenza    70 Kw dimensioni Lunghezza    25.000 mm Larghezza     15.000 mm Altezza  ...

faceplate diameter: 4.000 mm travel -x axis: 4.500 mm travel -z axis: 600 mm control: Siemens Sinumerik 840D feed range: 0 - 8.000 mm/min Head lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3200 mm turning diameter over slide rest: 2400 mm turning length: 15000 mm faceplate diameter: 2600 mm control: Siemens 840 Dsl workpiece weight max.: 80000 kg accuracy +/-: bis/up to: 0,01 mm spindle motor: 110 kW faceplate speeds from - to: 0-50 U/min total power requirement: - kW weight of the machine ca.: 60 t overhauled and modernized 2009 & 2012/2013 equipped with: - CNC control Siemens 840D SL - 2 supports with 1 controller each - 4-jaw face plate - 2 hydraulic steady rests - hydraulic tailstock Machine is dismantled and stored. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning dia. over bed: 3.520 mm turning diameter over slide: 3.000 mm turning diameter over slide: 2.440 mm turning length: 15.000 mm Control: Sinumerik 840 D SL turning speeds: 50 U/min workpiece weight max.: 80.000 kg turning diameter: orig. 3500 / mod. 2400 mm accuracy +/-: 0,01 ° total power requirement: 110 kW weight of the machine ca.: 154,4 t dimensions of the machine ca.: 20,7 x 6,0 m - The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system. - In the course of the work, it became apparent that the two double-row cylindrica ...

Change gear, change gears, gear -for: heavy-duty lathe Braun Zerbst -Number: 23 pieces change gears -Module: mm -Dimensions: 530/530/H735 mm -Weight: 144 kg ...

• maggiori informazioni