CONTROLS   CNC controls SIEMENS SINUMERIK 840 C WORKING RANGE -CUBIC-   X-axis travel: 4750 mm   Y-axis travel: 2350 mm   Z-axis travel: 1200 mm PORTAL / BRIDGE   distance between columns: 1640 mm TABLE   table surface (left-right): 4000 mm   table surface (front-back): 1250 mm SPINDLE / HEAD   spindle revolutions (min): 10 /min   spindle revolutions (max): 4000 /min   number of gears: 2   tool fixture: HSK A50 TOOL MAGAZINE   magazin type: cartridge magazine   number of positions: 200   tool diameter max.: 200 mm   tool length max.: 500 mm ...

Unisign Univers 6 X: 4000 - Y: 800 - Z: 600 mm CNC Longitudinal travel X-axe: 4000 mm Crosstravel Y -axe: 800 mm Travel Z-axe (Height): 600 mm Dimensions clamping space - table: 4100 x 900 mm Max Height of workpiece: 820 mm Power on spindle: 20/26 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 6000 rpm Control: Siemens 840D Power needed: 50 kVa Weight: 24 ton Coolant pump: yes

Unisign Univers 4000 (UV 4000) Centro di lavoro verticale CNC chassis Dimensioni della tavola (2) 825 x 625 mm. Numero di pallet: 2 Spostamento asse x 1600 mm. Spostamento asse y 600 mm. Spostamento asse Z 500 mm. 4. Asse (tavola rotante) NC Carico massimo tavola 600 kg Numero di utensili nella rivista 51 pezzi. Velocità massima mandrino 12.000 giri/min. Portautensili DIN 69871A Controllo CNC Fanuc 21i MB Se avete domande sulla macchina, non esitate a contattarci telefonicamente o via e-mail. Sentiti libero di controllare i nostri altri annunci per una panoramica completa del nostro inventario.

Description: Attention: The machine is only available from 01.07. and can only be taken over from this date. Machine number 5060 , Including chip conveyor ,  , Attention: without 3-jaw chuck, ,clamping devices and workpieces z-motion: 500 mm, max. workpiece weight between centers: 600 kg, x-motion: 1,600 mm, y-motion: 600 mm, control: SIEMENS SINUMERIK 810 D, table surface area l x w : 855x600 mm, taper: SK 40, toolchanger positions: 51, spindle torque: 100 Nm, turning speed range: 12,000 rpm, rapid motion: 30 m/min, total power requirement: 26 kW, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 5,500 x 2,400 x 3,500 mm

N. 5011: 1 gebr. Set di tasche per caricatori / porta utensili SK 40 Fabr. UNISIGN, tipo adatto per Univers 4, con 7 supporti base + 10 tasche portaocchi  ...

• maggiori informazioni

x-travel: 1500 mm y-travel: 500 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: 19 t dimensions of the machine ca.: 6x3,45x3,15 m Brand: Unisign Type: Uniport 4 CNC brand: Siemens CNC model: Sinumerik Year of make: 2005 Table length: 2.200 mm Table width: 1.500 mm Number of pallets: 2 X: 1.500 mm Y: 500 mm Z: 400 mm Machine dimensions: 6.000 x 3.450 x 3.150 mm Machine weight: 19.000 kg 5 Axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 600 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Brand: Unisign Type: UV 4000 CNC brand: Siemens CNC model: Sinumerik 840 D Year of make: 2007 Vertically Table length: 2.500 mm Table width: 600 mm Number of pallets: 1 X: 1.600 mm Y: 600 mm Z: 500 mm Preparation for 4th axis Clamping possibility 4th axis: 1.660 x 200 mm Spindle taper: BT40 Tool changer: 51 Maximum speed: 12.000 RPM Max. workpiece height: 690 mm Chip conveyor Machine weight: 6.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Unisign Unipro 5P Drilling and Vertical Machining center was manufactured in the year 2004 in Netherlands. It is equipped with a Siemens Sinumerik 840D control unit. The machine has a spindle speed of 12000 rpm and a drill pressure of 1300 kN. ...

• maggiori informazioni

Number of axis: 5, max. rotational speed: 6000/min, pallet dimensions: 1700x1700mm, number of tool slots: 208, connected load: 110kVA, controls: Siemens 840D, weight: 50t, operational hours counter: 60.632h. ...

• maggiori informazioni

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 8x6,4x4,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.