182 IMA machine à vendre

Fabricant : IMA Modèle : C23 Année de fabrication : 1994 Type de machine : machines d’emballage de thé Puissance : 6,7 KW Tension : 395 V Actuel : 11,2 A Phases : 3 Fréquence : 50 Hz Pour en savoir plus, cliquez ici - / Contactez-nous à -

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

Ce centre d’usinage CNC 3 axes IMA BIMA 310 120/300 a été fabriqué en 1999. Si vous souhaitez obtenir des capacités de menuiserie de haute qualité, pensez à la machine IMA BIMA 310 120/300 que nous proposons à vendre. Contactez-nous pour plus d’informations.

Machine d’emballage complète automatique. Contrôleur : Siemens, type Simatic S7-300.

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...

Ce centre d’usinage CNC IMA BIMA 410 à 4 axes a été fabriqué en 2000. Il dispose d’une surface de travail de 3000 mm en X et de 1200 mm en Y, avec une hauteur de serrage maximale de 100 mm. La machine est équipée d’un système de lubrification central automatique et de servomoteurs en courant alternatif pour un fonctionnement précis. Si vous souhaitez obtenir des capacités d’usinage du bois de haute qualité, pensez à la machine IMA BIMA 410 que nous proposons à vendre. Contactez-nous pour plus de détails.

Cette station de déchargement et d’empilement des systèmes IMA AM33 - 3000/1300 a été fabriquée en 2005. C’est un choix robuste et fiable pour vos besoins en automatisation. Contactez-nous pour plus d’informations.

Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003

Manufacturer: IMA, Type: Compact P/C F 6220, Year: 1996, Control: Imatronic 121, Min-max edge material mm: 14-55, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 8-20, Infeed table: yes, mit Vakuum: 2 X 3 kw, Power per lamp: 1-fach, kW Leistung Laser: yes, Coil magazine: yes, Strip magazin: yes, Bevel milling: MFA. 8.346, radius milling: yes, Magazin : yes nicht schwenkbar, Vertical grooves: R 3 und R 2, Nuten : yes, Radius scraper: yes, Type of scraper: 8.50, Spraying system 2: yes, Edge sanding: Rolle, Buffing unit: Ja, Free places: yes, Year :1996

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010

Manufacturer: IMA, Type: Novimat K/I/G80/1005/SR3 L12, Year: 2000, Program: IMA, Control: IMATRONIC 100, Work piece width min-max mm: 140 - 600, Min.-max. workpiece height in mm: 16 - 32, Min-max feed m/min: 5 - 25, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, Coil magazine: 12 fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Corner trace buffing: yes, Corner trace buffing: yes, Barcode: yes, Freiplätze: 1, Machine lenght mm: 12300, Noise enclosure: yes, Rückführung Typ: yes, Year :2000

Manufacturer: IMA H 610 Tandem, Type: BIMA 610/2H/875, Year: 1997, Software: IMAWOOP, Working range X: 5.700, Working range Y-axis: 1.900, Working range Z: 440, C axis: yes, Programming station office: möglich, Work piece width min-max mm: 150 - 1.200, Min.-max. workpiece length in mm: 250 - 5200, Min.-max. workpiece height in mm: 10 - 120, Pendulum processing: yes, Number of milling spindles: 2, Tool adaption system: HSK 63F, Milling engine 1 hours power: 7,5, rpm 1): 1.500 - 18.000, Milling engine 2 hours power: 7,5, rpm 2): 1.500 - 18.000, Vertical drills-X: 2 x 7, Drill vertical Y: 2 x 12, Traverse table: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 200, Saw unit: yes, Edgebanding unit: no, Radial arm machine: yes, Year :1997

Manufacturer: IMA Nowimat Leistenmaschine, Type: U/F/12/360, Year: 1996, Min-max edge material mm: 3-12, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 10-25, Premilling: yes, Application of separation agent: no, Coil magazine: 1-fach, Strip magazin: Ja, Min.-max. batten magazine mm: yes, Mitre stations: yes, Radius milling axis adjustment: yes, Corner tracing type: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: no, Bonding part EVA: yes, Groove milling: Freiplätze 3, Workpiece support: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1996

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

Manufacturer: IMA OBK, Type: OBK, Year: 1996, Premilling: yes, Profile milling: yes, Profil sanding: no, Edgeband thickness max mm: 60, Thickness of coiled edgeband max mm: 1, Panel length min mm: 300, Work piece thickness min mm: 100, Feeding speed max m/min: 5-30, Machine lenght mm: 11000, Pressure zone star: yes, Pressure zone exchange system: 4-fach, Strip magazin: no, Trimming saw: yes, Flush milling: yes, Scraper: yes, Buffing unit: 2 Stück, Glue system granulate/cartridge: granulat, Spraying device: yes, Noise enclosure: yes, Compressed air bar: 6, Maschine kann vorgeführt werden , Year :1996

Manufacturer: IMA, Type: Compact/U/812/F, Year: 1996, Program: IMA, Kantenmaterial : 0,4-12, Work piece width min-max mm: 70, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 8-50, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 15-25, Vorwärmeinheit IR: yes, Premilling: yes, Panel length min mm: 200, Leistenmagazin min-max mm: yes, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Mitre stations: yes, Mitre stations: yes, Radiusfräsen : yes, Contour milling type: yes, Eckenkopierfräs Motore: 4 Motore, Nutfräsen: yes, Number of sanding units: 3, Kantenschleifen: 1, Profilschleifen oben unten: yes, Radius scraper: yes, Flat scraper: yes, Top pressure belt/roller: Rolle, Year :1996

Manufacturer: IMA, Type: AVM/K/I/G 80/822/SR/ L 20, Year: 1991, Min-max edge material mm: 3-15, Work piece width min-max mm: 80, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 50, Min-max feed m/min: 18, Finished product: Leistenmaschine, Premilling: yes, Fine milling: yes, Coil magazine: yes, Min.-max. batten magazine mm: 3-15, Mitre stations: yes, Pre-milling: yes, Top pressure belt/roller: Rolle, Kantenschleifen gerade: yes, Kantenschleifenradius: 2, Werkstückunterstützung: yes, Compressed air bar: 6, Machine lenght mm: 11000, Year :1991

Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001

Manufacturer: IMA mit Verleimung, Type: GX30/E/130/430, Year: 2014, Control: IMA, Software: IMA Woop 10, Barcode: möglich, Maschinensteuerung: IMA Woop 10, Programming station office: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, C axis: yes, Pendulum processing: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, Number of milling spindles: 1, Tool adaption system: HSK F-63, rpm 1): 1000-24000, Number of tool changers: 18, Tellerwechseler: 1, Pickup Wechlser: 1, Mitfahrender Werkzeugwechsler: yes, Working widht max mm: 1400, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 2 X 120, Saw unit: yes, Edgebanding unit: yes 2 Fach Rolle, Edgeband hight mm: 55, Magazine Qty:  ...

Manufacturer: IMA, Type: BIMA G X60 R 160/730, Year: 2012, Control: IMA Woop, Software: ICOS CNC, Work piece width min-max mm: 1600-2000, Min.-max. workpiece length in mm: 7000 oder 2 X 2900, Min.-max. workpiece height in mm: ca. 250, Working range X: 7300, Working range Y-axis: 1600-2000, Working range Z: 500, C axis: yes, B-axis: yes, Pendulum processing: yes, Work piece width min-max mm: 1600-2000, Min.-max. workpiece length in mm: 7000 oder 2 X 2900, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 16, rpm 1): 0-24000, Number of tool changers: 2, Tellerwechseler: 18-fach und 2 fach, Vertical drills-X: 11, Drill vertical Y: 11, Horizontal drills-X: 2, Drill horizontal Y: 3, Traverse table: 8, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 140,  ...

Manufacturer: IMA Kantenbearbeitung , Type: U/F 720 V/Compact, Program: yes, Control: no, Min-max edge material mm: 3, Work piece width min-max mm: 60, Min-max edge material mm: 3, Work piece width min-max mm: 60, Edgeband height max mm: 70, Min-max feed m/min: 3, Finished product: 250, Soft forming: 2, Axis control: no, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Granulat und PU, Profile milling: no, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, IR zone: MFA 843, Coil magazine: yes, Strip magazin: yes, Radius milling axis adjustment: Riemen, Corner tracing type: 10-25, 4 motors: 6,

Manufacturer: IMA, Type: FBA/II/R80/660 F, Year: 1992, Control: IMATRONIC, Work piece width min-max mm: 220-2000, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 8-45, Working widht max mm: 2600, Machine with controlled dogs: yes, Cam distance mm: 320, Extended chain conveyor: 850, Scoring saw controlled: yes, kW / U/min: 1,5/6000, 1st milling unit kW / rpm: 4,4/6000, 2nd milling unit kW / rpm: 3,3/6000, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 3,3/6000, 3. swivelling controllable: yes, 7.Profilschleifaggregat Stk.: 4 pro Seite, 8.Flächenschleifaggregate Stk: 2, 9. Bürstenaggregat: 2, Aggregats per side - total: 9, Sawing unit: 1, Hersteller Prägestationen: 3, Folienprägestationen: 2, Prägehöhe mm: 5-30, Year :1992

Manufacturer: IMA, Type: Compact PC/KIF 7220, Year: 1997, Programm: yes, Achsensteuerung: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: yes, Number of tools per tool-magazine: no, Radius scraper: yes, Flat scraper: yes, Buffing unit: yes, Moulding units swivel-mounted: yes, Schwenkbereich Grad: 45-90, Top pressure belt/roller: Rolle, Feeding speed max m/min: 10-20, Compressed air bar: 6, Year :1997

Manufacturer: IMA Kantenbearbeitung , Type: U/F 720, Year: 1995, Programm: yes, Achsteuerung: no, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Work piece thickness min mm: 70, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: 12, Strip magazin: no, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Soft edge single side: no, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Feeding speed max m/min: 10-25, Compressed air bar: 6, Year :1995

Fabricant : IMA, Type : Gamme de machines Combima, Année de fabrication : 2000, Contrôle : IMA, Largeur de la pièce min-max mm : 1 machine 250-1500, Longueur de la pièce min- mm max : 2 Machine 250-2600, Hauteur de la pièce min- mm max : 10-50, Alimentation : Oui, Machine 1 : oui, Transfert d’angle : oui, Machine 2 : oui, Perceuse 1 : non, Machine d’empilement : oui, Épaisseur maximale des bandes mm : 3, Hauteur maximale des bandes : 50, Espacement mm : 850, Chargeur des rouleaux : 6 pliées, Alimentation max m/min : 10-30, fraisage de jonction : oui, magasin à bandes : non, magazine à bords : oui, station de coupe transversale : oui, scie à coupe transversale : oui, fraisage Büdig : oui, fraisage rayeur : oui, fraisage biseauté : oui,

Cette machine de menuiserie a été fabriquée en 2004. Il dispose d’une axe principale robuste de 12 kW avec une plage de vitesses programmable de 1500 à 24000 tr/min et d’un porte-outils HSK F63. La table de la machine comprend 6 bras de support et des ensembles de plaques d’aspiration, ajustables selon différentes tailles de pièces. De plus, il offre une rotation rapide de 100 m/min sur l’axe X et un magasin de changement d’outil 18 volets. Pour plus d’informations sur cette machine de menuiserie, n’hésitez pas à nous contacter.