모델
(생산자: IMA)
어쿠스틱 후드 für IMA 엣지 밴딩 머신은 재고에서 사용 가능한 다양한 버전과 치수로 제공됩니다. 개조 / 새로운 래커는 추가 요금으로 이용 가능합니다.
형식 스탠드 IMA 높이: 980 mm 모터 포함 4.4 kW 모터 샤프트 직경 35mm 암 스레드 M16 왼쪽 남성 스레드 35x1.5 오른쪽 창고에서 가격이 잡히지 않습니다. 요청시 가능한 다른 버
Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures
이 3축 IMA BIMA 310 120/300 CNC 목재 가공 센터는 1999년에 제작되었습니다. 고품질 목공 기술을 원하신다면, 저희가 판매 중인 IMA BIMA 310 120/300 기계를 고려해 보세요. 자세한 정보는 저희에게 문의해 주세요.
엣지밴딩 기계 IMA 타입 어드밴티지 400 기술 데이터: - 기계: 반환형 겔트마이어형 PRFU 1200 LU 포함; 제조 연도: 2015년 10월 - 설명: 사진 참조
IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...
이 4축 IMA BIMA 410 CNC 목재 가공 센터는 2000년에 제작되었습니다. X 방향 작업 면적 3000 mm, Y 방향 1200 mm이며, 최대 클램핑 높이는 100 mm입니다. 이 기계는 자동 중앙 윤활 시스템과 정밀한 작동을 위한 AC 서보 모터를 갖추고 있습니다. 고품질 목재 가공 능력을 원하신다면, 저희가 판매 중인 IMA BIMA 410 기계를 고려해 보세요. 자세한 내용은 저희에게 문의해 주세요.
이 IMA AM33 - 3000 / 1300 시스템 하역 및 적재 스테이션은 2005년에 제작되었습니다. 자동화 요구에 견고하고 신뢰할 수 있는 선택입니다. 자세한 정보는 저희에게 문의해 주세요.
Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003
Manufacturer: IMA, Type: Compact P/C F 6220, Year: 1996, Control: Imatronic 121, Min-max edge material mm: 14-55, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 8-20, Infeed table: yes, mit Vakuum: 2 X 3 kw, Power per lamp: 1-fach, kW Leistung Laser: yes, Coil magazine: yes, Strip magazin: yes, Bevel milling: MFA. 8.346, radius milling: yes, Magazin : yes nicht schwenkbar, Vertical grooves: R 3 und R 2, Nuten : yes, Radius scraper: yes, Type of scraper: 8.50, Spraying system 2: yes, Edge sanding: Rolle, Buffing unit: Ja, Free places: yes, Year :1996
Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010
Manufacturer: IMA, Type: Novimat K/I/G80/1005/SR3 L12, Year: 2000, Program: IMA, Control: IMATRONIC 100, Work piece width min-max mm: 140 - 600, Min.-max. workpiece height in mm: 16 - 32, Min-max feed m/min: 5 - 25, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, Coil magazine: 12 fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Corner trace buffing: yes, Corner trace buffing: yes, Barcode: yes, Freiplätze: 1, Machine lenght mm: 12300, Noise enclosure: yes, Rückführung Typ: yes, Year :2000
Manufacturer: IMA H 610 Tandem, Type: BIMA 610/2H/875, Year: 1997, Software: IMAWOOP, Working range X: 5.700, Working range Y-axis: 1.900, Working range Z: 440, C axis: yes, Programming station office: möglich, Work piece width min-max mm: 150 - 1.200, Min.-max. workpiece length in mm: 250 - 5200, Min.-max. workpiece height in mm: 10 - 120, Pendulum processing: yes, Number of milling spindles: 2, Tool adaption system: HSK 63F, Milling engine 1 hours power: 7,5, rpm 1): 1.500 - 18.000, Milling engine 2 hours power: 7,5, rpm 2): 1.500 - 18.000, Vertical drills-X: 2 x 7, Drill vertical Y: 2 x 12, Traverse table: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 200, Saw unit: yes, Edgebanding unit: no, Radial arm machine: yes, Year :1997
