HOMAG machine à vendre

Single-sided edge banding machine Make: HOMAG Type: KAL 210 AMBITION 2264 Year of construction: 2014 One-sided edge banding machine for editing of straight workpiece edges and for gluing and post-processing in the longitudinal and transverse pass. Overview of aggregate equipment: - Separating agent spray unit - Joining milling unit - Gluing unit A20 with 2 rolls - end trimming unit HL84 - Pre-milling unit BF10 - Form milling unit FK11 manual - Profile scraper PN10 - Finishing unit Feed 18 - 25 m/min. Feed max. with FK11 20 m/min. Working height 950 mm Pneumatic connection 6 bar Total length 7845mm Workpiece thickness 8 - 60 mm Edge height max. = workpiece thickness + 4 mm Edge material roll 0.3 - 3 mm Edge material strips 0.4 - 20 mm Aggregate equipment: - Separating agent spray unit top/bottom - Joining milling unit 2 motors each 3 kW, 150 Hz ...

Sanding unit Make: HOMAG Type: PS10

Oscillating buffing unit HOMAG

Buffing unit - 1 motor

Description: - Workpiece length  , All units max. approx. 5200 mm  , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width  , Rear stop for all units max. approx. 1400 mm  , Rear stop cutter 25 mm max. approx. 1550 mm  , Front stop for all units max. approx. 1150 mm  , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis  , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...

Description: ATTENTION: Location 97944 Boxberg- Windischbuch, Germany Very well maintained HOMAG Optimat BOF 311/60/K CNC processing center. Technical data: Workpiece length all aggregates - single loading max. 6.000 mm and pendulum loading max. 2.375 mm Workpiece length tool diameter with 25 mm - Single occupancy max. 6,175 mm and pendulum occupancy max. 2,550 mm Workpiece width all units - Front max. 1,450 mm and rear max. 1,700 mm Workpiece width tool diameter with 25 mm - Front max. 1,525 mm and rear max. 1,850 mm Workpiece thickness - Max. 300 mm incl. clamping device Clamping table Console with LED display in X and Y direction - Console length 1640 mm Main spindle 15 KW and speed 1.000 - 24.000 rpm - C-axis with interface for FLEX-5 (aggregate not included!) Drilling head MPU horizontal and vertikal S360° - MultiProcessingUnit with C-axis +/- 185° for drilling operations  ...

Description: ATTENTION: Location 35614 Aßlar, Germany Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. ,The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000! HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391 HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383 Workpiece length: - Single occupancy with tool diameter. 25mm max. 5200mm - Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy Workpiece width front stop: - max. 1525 mm with tool diameter 25mm - max. 1525 mm with web edge pressing unit - max. 1450 mm for all units Workpiece width stop at the back: - max. 1730 mm with tool diameter 25mm - max. 1650 mm with web edge press unit - max. 1600 mm for all units Main spindle:  ...

WW: a1 user Brand Homag Machine number MR005603 Serial Number 0-200-21-4058 Maximum thickness of edge banding 3 mm Maximum thickness strips 20 mm Maximum panel thickness 65 mm Throughput 24 /min Pre-milling unit available Year of construction2000

Description: With Homag workpiece feeder TBL 100/25/12/F and Ligmatech workpiece return unit ZHR 30L/155/F  , edge thickness: 3 mm, workpiece thickness: 12 -60 mm, feed: 18 m/min, gluing unit: Ja, snipping unit: Ja, rough trimming unit: Ja, fine trimming unit: Ja, profile trimming unit: Ja, universal milling unit: Ja, edge sanding unit: Ja, flat scraping unit: Ja, profile scraping unit: Ja, edge buffing unit: Ja, control: powerControl NC 21, return system: Ja, total power approx: 40 kW, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 1,700 mm, weight approx.: 4,000 kg

Description: HOMAG KL 76/A20 Edge Bander (incomplete) Approx. Onsite Dimension. (l x w x h): 8,400 x 1,060 x 2,100 mm, weight approx.: 4,500 kg

Edge banding machine Minimum working width: 55 mm with workpiece thickness 22 mm 100 mm with workpiece thickness 60 mm Workpiece thickness 12-60 mm Workpiece overhang 30 mm Edge material strips 0.4 – 20 mm Edge material roll 0.3 – 3 mm Roll diameter max. 830 mm Conveyor chain 80 mm wide with rubber pad Workpiece support Scissor version with roller bearing, max. 1000mm extendable Speed 18 – 24 m/min Workpiece return conveyor Homag Ligmatech ZHR 15/30/L1 Year 1999 Weight 980kg Control – Software: HOMAG HOMATIC NC 21

Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor. serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 -  ...

Description: - Inlet ruler with automatic adjustment and extension 500 mm - BONDING PART A20 BASIC - Pressure zone C with automatic adjustment - Release agent spray unit - Pre- and profile milling unit with pneumatic adjustment - Edge sanding unit KS10 - Profile sanding unit top/bottom PS41 / PS42 WITHOUT return edge magazine with: 2 -fold roller, serial number: 0-200-21-6055, edge thickness: 0,3 - 3 (20) mm, workpiece thickness: 8 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 25 m/min, joint trimming unit: 2 x 3 KW, gluing unit: A20/QA34/C, snipping unit: HL84 (2 x 0,8 KW), rough trimming unit: 2 x 1,5 KW, fine trimming unit: 2 x 0,4 KW, profile trimming unit: FF12 (4 x 0,4 KW), edge sanding unit: KS10 / PS41 / PS42, flat scraping unit: ja / yes, profile scraping unit: MN21 automatic, edge buffing unit: ja / yes, control: Power Control PC 22, return system: Nein / No, Approx. Onsite Di ...

Description: HSK63 LOCK CASE D=16 MM 2 SPINDLES Approx. Onsite Dimension. (l x w x h): 800 x 500 x 500 mm, weight approx.: 10 kg

Description: X-axis working surface: 4400 mm Y-axis working surface: 2100 mm vacuum pump automatic tool change motor power: 12 kW , control system: POWER PC CONTROL PC 85 x-motion: 4,400 mm, y-motion: 2,100 mm, control: POWER PC CONTROL PC 85, Approx. Onsite Dimension. (l x w x h): 6,200 x 2,400 x 1,000 mm, weight approx.: 4,300 kg

Description: Flexline HOMAG PROFI KAL 330/6/A3/S2 edge banding machine  , , , serial number: 0-200-24-9153 is equipped as follows:  , , , HOMAG PROFI TBL 100/35/12 feed table with fully automatic workpiece feeding system WZ10 for workpieces with different dimensions in longitudinal and transverse direction Technical data: - Workpiece length 250 - 2500 mm - Electro-pneumatically controlled cross weigher - Air cushion table ( is not included in the scope of delivery )  , , , 2 HOMAG PROFI KAL 330/6/A3/S2 edge banding machine Technical data: - Universal trimming unit UF11, electro-pneumatically controlled  ,Note: the feedback is not included in the scope of delivery  , serial number: 0-200-24-9153, workpiece thickness: max.60 mm, feed: 18-25 m/min, joint trimming unit: Ja/Yes, snipping unit: Ja/Yes, fine trimming unit: Ja/Yes, pro ...

Description: HSK63 DRILL/MILLING INCLINABLE, CRANKED VERSION Approx. Onsite Dimension. (l x w x h): 700 x 500 x 500 mm, weight approx.: 30 kg

Description: Max. rotational speed 5000 rpm Serial number 4-21978 without further accessories Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 8 kg

Description: Maximum 15,000 rpm, series no. PCB: 0193.03.06, without additional accessories Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm, weight approx.: 10 kg

Description: • Horizontal panel saw • Serial number 0-341-03-0163 • Total installed power 14 KW • Cutting width 3200 mm • Cutting depth approx. 3200 mm • Cutting height approx. 50 mm • 5 Grippers • Main saw blade: max. diameter 300 mm and motor 5.50 KW, rotation speed 4550 rpm • Scoring saw blade: max. diameter 150 mm and motor 0.55 KW, rotation speed 5100 rpm • Saw carriage feed speed: 6 - 32 m/min • Saw carriage return speed: 32 m/min • Pushers feed speed: 18 m/min • Front air tables: one fixed of dimensions 1800 x 600 mm and 2 movable of dimensions 1800 x 600 mm • Control CNI VIC 800 Approx. Onsite Dimension. (l x w x h): 5,250 x 6,200 x 2,070 mm, weight approx.: 4,000 kg

Description: Total processed length: 205,152 m Operating voltage 400 V Frequency 50 Hz Working width min. 10 mm (with tool diameter 125 mm) Workpiece width after processing min. 10 mm and max. 250 mm Working height min. 10 mm (for tool diameter 125 mm) Workpiece height after processing min. 10 mm and max. 160 mm Control: powerControl with Powertouch MOULDTEQ M-300 Feed: Feed system - 6 spindles Feed speed 24 m/min infinitely adjustable via powerTouch Feed speed min. 6 m/min and max. 24 m/min Maximum tool weight 22 kg with CE certificate and documentation without tools 1. spindle: 7.5 kW, 2. spindle: 7.5 kW, 3. spindle: 7.5 kW, 4. spindle: 7.5 kW, 5. spindle: 7.5 kW, 6. spindle: 7.5 kW, serial number: 0-254-11-2760, planing width: 250 mm, planing height: 160 mm, length of surfacing-table: 2,500 mm, number of spindles: 6 pieces, feed: 24 m/min, Approx. Onsite Dimension. (l x w x h): 4,800  ...

Description: Floor size: 6600 x 1290 mm No. 12-position tool changer. Main spindle with No. 9-tool drilling head. With auxiliary edging head equipped with No. 3 edge slots magazine of adjustable size, size range from: 10mm to 600mm by interchanging the slots. Present two SIEMENS vacuum pumps with NASH ELMO fans.  , Y-axis travel: 1750mm Z-axis travel: 250 mm X-axis travel: 6000 mm  , Control: OMATIC  , Approx. Onsite Dimension. (l x w x h): 8,000 x 4,000 x 2,450 mm, weight approx.: 5,000 kg

Description: Control voltage on: 35'849 h Main spindle BE1: 23749 h Boring head BE1: 3709 h Drill head: 17 spindles Main spindle: 18.5 kW controlled Chain changer 30-fold HSK F63 Speed range 0-18'000 rpm Drilling head 35 spindles vertical, for automatic changing into the main spindle Control system was converted in 2014: RECHNER IPC 5.11.0.0 WITH DVD, Industrial PC IPC 5.11 from Eltec with Windows XP operating system, hardware: Industrial PC Intel Core 2 Duo E8400 3.0 GHZ, working memory 4 GB RAM, 2 COM interfaces RS232, internal DVD-ROM drive, 1 fixed hard disk with 250 GB, 1 USB hard disk for data backup, 4 USB ports, Ethernet network connection with EC Declaration of Conformity Series no. 0-201-19-1527 without tools or units and without vacuum pump ( central vacuum system ) Translated with DeepL.com (free version) working width y-axis: 1,600 mm, working height z-axis: 950 mm, work ...

Description: Powerful CNC machining centre equipped with: 2 pcs. main spindles, each with C-axis one of them with Flex-5 interface, 2 x 11 kW - HSK 63 drilling unit with 25 drilling spindles and groove saw 0/90° 2 pcs. 10-fold tool changers 2 console-tables for pedular processing and 4-fold processing max length of workpiece 3740 mm, while pedular processing 1830 mm, while 4-fold processing 700 mm max width of workpiece 1600 mm for processing with milling tool diameter of 25 mm, 1300 mm for all aggregates stop pin for workpieces with overhang of top layer LED positioning system vacuum loader Homag TBP 370 Traverse length approx. 13 metres Installation height from floor 1300 mm with 8 vacuum cups (130 mm and 100 mm diameter) new vacuum pumps in 2023 for further technical details please have a look at the pdf file (German language) working width y-axis: 1,600 mm, working l ...

Description: max. 12000 rpm Teilenummer 1-017-95-1741 without further accessories Approx. Onsite Dimension. (l x w x h): 150 x 150 x 250 mm, weight approx.: 10 kg

Description: serial number: 0-201-06-0390 Technical specifications: 3 axes + axe 'C' vertical milling motor 7,5kW, HSK F63 drilling head with 11(X) + 6(Y) vertical spindles and 4 horizontal spindles (2 on X axis and 2 on Y axis) tools magazine HSK - 30 positions 8 bridges L=1340 mm, with 16 suction cups 4 pneumatical clamps for fixing narrow pieces 4 loading aids vacuum pump Becker 100 m³/h + vacuum pump 2BL2101 (80m³/h) working table: 4000 x 1300 mm axis travel: X=4900mm Y=1800mm Z=280mm waste disposal belt security belt in front of the machine (3 parts) perimetral protective fence total connection: 17 kW software: woodWOP NC control: power control PC85 CE mark without tools vacuum pump: 100 m³/h, serial number: 0-201-06-0390, toolchanger positions: 30, total electrical load: 17 kW, 5-axis machining: No, Number of vacuum pumps: 2 pieces, Integrated C-axis:  ...

Description: Total connected load 12 kW Workpiece length 200 - 2500 mm Workpiece width 70 - 850 mm Workpiece thickness 10 - 60 mm serial number: 0-250-05-4772, total electrical load: 12 kW, software: WoodWob5, Approx. Onsite Dimension. (l x w x h): 2,950 x 1,540 x 1,895 mm, weight approx.: 1,450 kg

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATIC NC16

This HOMAG BAZ20/50/16/K Wood working machine was manufactured in the year 1998. It is equipped with a PC 85 mit SPS control unit. The machine has a spindle speed of 17500 rpm.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg