Manufacturer: Homag Anschlaglineal gesteuert, Type: aus KFL 10, FREITEXT1: Pneumatisch gesteuert, FREITEXT2: 8 fach Revolver, FREITEXT3: 10 mm Schiene, FREITEXT4: mit Befestigung Kettenbahn,
Manufacturer: Homag, Spare part from machine: Homag KL 79, Edge sanding unit: yes, for left machine side: yes, Own drive: yes, Total hight mm: 450, Installation width mm: 350, Max. roller diameter: 80, Speed rpm: 1450, Pneumatically controlled: yes, pneumatisch gesteuert : yes, Sanding belt hight: 150, Sanding belt width max mm: 150 X 2100, Sanding belt length max mm: 2100, Main engine kW: 0,5, 2 belt speeds: 1, Belt clamping pneumatically: yes, Oscillation: yes,
Manufacturer: Homag, Type: Rechnerkarte, Model: CPU-Karte 70 BO 10 MHz 2 RAM, Serial number: 4-086-05-194,
Manufacturer: Becker , Type: SV.5.430/2, Year: Turbine zum Kühlen von Transportkette, Control: A 1781760, Year :Turbine zum Kühlen von Transportkette
Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,
Manufacturer: Homag, Type: NFL 26/6/10/PW/L, Year: 2002, Control: Homag, Work piece width min-max mm: 136-250, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-25, Working width min-max mm: 136 - 250, Feeding speed min-max m/min: 15 - 60, 1st milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 2nd milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 3rd milling unit kW / rpm: 6,6 kW Profilfräsen 6000 U/min, Free space for units: 2x 460 mm, Machine overhauled: no, System dismantled: yes, Year :2002
Manufacturer: Perske Umrichter, Year: 1996, Type: 2004 neugewickelt, Year :1996
Manufacturer: Homag Fräsständer Bündigfräsaggregat, Spare part from machine: KF Maschine, for right machine side: rechts, Number of motors: 2, kW-Leistung : 1,1, Drehzahlen U/min : 18000, Siko Anzeige : yes, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Pneumatically controlled: no, kW-output 2: 1,1/300,
Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,
Manufacturer: Homag Flachzieklinge, Type: Nachputzeinrichtung Leimfuge, Ausführung links: yes, Ausführung rechts: yes, Flachziehklinge: yes, Tracing by roller: yes, FREE TEXT: Beseitigung von Klebstoffresten im Bereich der Leimfuge. Abtastung von oben und unten. Werkstückdicke 7 - 60 mm,
Manufacturer: Homag Druckrollen, Type: Teile von KF Maschine, Year: 1996, FREITEXT1: EINZUGSVORRICHTUNG 10 ROLLEN HOCHKLAPPBAR mit schräggestellten angetriebenen Rollen versetzt. Min. Werkstücklänge 250 mm, Year :1996
Key data: 4200 mm, 1500 mm
Homag CNC BAZ, 옵티매트 232/40/K 파워 컨트롤 PC85, 우드왑, ATC 12폴드, 다양한 액세서리, 접착 장치 등... 2개의 접이식 및 확장 가능한 교환대, 2단계 클램핑 테이블과 2개의 진자 할당용 처리 스테이션, 최대 엣지 높이 65mm, 칩 및 자재 처리, 드릴 헤드 17개의 스핀들, 주 스핀들 14.5 KW, 속도 24000 1/분 많은 액세서리를 포함해 상태: 해
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW
Bridge type Capacity for all units: 3300 x 1100 mm (alternating: 2 x 1025 x 1100 mm) Capacity for routing with tooldiameter 25 mm: 1550 mm Workpiece thickness up to 300 mm (stroke Z-axis 600 mm) Speed in X and Y: 60 m/min, Z: 25 m/min, Vector: 85 m/min 6 Support rails with LED positioning indication Vacuum: 100/140 m3/h Controlls: Powercontrol PC85 Waste/chip removal belt in machine base Machine pneumatically prepared to take pneumatic clamps, 3 pcs clamps included Drilling unit V9/H4, 13 spindles, motor 2,2 kW Main spindle DRIVE5C+, 5-axis, 10 kW, HSKF63 taper, speed 1000 to 24000 r/min, tooldiameter up to 180 mm for routing, 350 mm for cutting 14-fold rotary toolchanger and pick-up place for a sawblade Woodwop software
입문서 번호: 8966 종류: 옵티매트 KAL 210/A3/S 프로듀서: HOMAG 창설: 2008 조건: 제어 시스템: 파워 컨트롤 PC 22 제본높이: 950mm 가장자리 두께: 0.3-3 mm 부품 두께: 12-40mm 이력 속도: 18-25 m/분 최소한. 소재 폭: 60 mm 기계 크기: 8300 × 1300 × 1800 mm
Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipm ...
기술 데이터: - 작업 높이 ¦ 950 mm - 공압 연결 ¦ 최소 6 바 - 기계 길이 ¦ 4305 mm - 일정한 급여 속도 8 m/분 - 작업물 폭 최소: - 가공물 두께 8-22mm ¦ 70 mm - 가공물 두께 23-40mm ¦ 120 mm 작업물 길이에 따라 - 작업물 돌출 ¦ 38 mm - 작업물 두께 ¦ 40 mm - 가장자리 높이 최대 = 가공물 높이 ¦ + 5 mm - 가장자리 재료 롤 ¦ 0.3 - 3 mm - 가장자리 단면적 최대값. - PVC용 135 mm² - 베니어용 100 mm² - 롤 직경 최대 ¦ 830 mm - 스트립 엣지 재료 ¦ 0.4-3.0 mm - 가장자리 단면적 최대값. - 스트립 135 mm² 장비: - 입구 자, 수동 조절 - 워크피스 지지 볼 슬리브 - 수동 체인 컨베이어 중앙 윤활 - 톱니 고무 롤러를 이용한 상단 롤러 압력 - 높이 수동 조정 - 조인팅 밀링 유닛 2x0.7 kW (40 mm 밀링 ...
Key data: 6000 mm, 1580 mm
HOMAG 옵티마트 BOF 311 - 건설 연도 2008년 - 소프트웨어 WoodWOP 5 - 주 스핀들 18.5 kW (2024년에 정비) - 공구 교환기 30자리 (공구/골재 없이 판매) - C축을 가진 메인 스핀들 (Flex-5 인터페이스) - 자동 표 - 즉시 이용 가능 - 분해 및 적재 포
Belt sander manufactured in 2018. This HOMAG SANDTEQ W-100 features a robust design suitable for various sanding applications. It operates on a supply voltage of 400Y/230 V and is equipped with a 3-phase power system. If you are looking to get high-quality sanding capabilities, consider the HOMAG SANDTEQ W-100 machine we have for sale. Contact us for further details.
Double sided edgebander manufactured in 2004. This HOMAG OPTIMAT KFR 526/10/A3/35 features a robust design suitable for various applications. It operates at a voltage of 400 V and has a load capacity of 250 A. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG OPTIMAT KFR 526/10/A3/35 machine we have for sale. Contact us for further details.
This HOMAG KDF 230 edgebander was manufactured in 2014. It has processed a total of 65,428 workpieces and 108,908.92 meters of edge length. The machine features a digital touchscreen control panel and a multi-flexible overhead dust extraction system. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KDF 230 machine we have for sale. Contact us for further details.
HOMAG 제어 시스템 상태가 좋고 완전히 기능하며, 현장에서 직접 보고 시험해 볼 수 있습니다. 해외 배송도 가능합니다. 시청: 기본적으로, 오해를 배제하기 위해 구매 전에 전원으로 문서를 확인하고 테스트할 수 있다는 점을 말씀드리고 싶습니다. 구매 전에 혼동을 피하기 위해 질문해 주세요. 일반적인 질문이 있거나 조문 예약을 원하시면 언제든지 아래 또는 위의 전화번호로 연락드릴 수 있습니다. 설명과 이전 판매 기록의 오류는 제외됩니다. 부가가치세는 제 송장에 별도로 표시되어 있습니다. 배송 대리인과 함께 배송합니다.
HOMAG의 공구 체인저 해외 배송도 가능합니다. 시청: 기본적으로, 오해를 방지하기 위해 구매 전에 해당 상품을 직접 확인할 수 있다는 점을 말씀드리고 싶습니다. 구매 전에 혼동을 피하기 위해 질문해 주세요. 일반적인 질문이 있거나 조문 예약을 원하시면 언제든지 아래 또는 위의 전화번호로 연락드릴 수 있습니다. 설명과 이전 판매 기록의 오류는 제외됩니다. 부가가치세는 제 송장에 별도로 표시되어 있습니다. 배송 대리인과 함께 배송합니다.
72.500 € 
