格劳尔 ZS 135N 切割和斜切圆锯 电机 400 V / 2.0 kW 转速 3800 rpm 切割长度 440 mm（90 时） 切割高度 135 mm（90 时） 斜接范围：水平45-90-25 斜接范围：垂直90-45（左） 锯片 350 mm 吸嘴 100 mm 重量 100 kg
切割和斜切圆锯，最大切割高度为200mm 稳定的铸铁结构 刀具滑块在淬硬和磨削钢轴上的精确滚珠衬套导向 手动锯进给 快速斜接调整，水平方向可达 65 个，垂直方向可达 60 个 可重新调整的固定停止 下锯片保护可连接到吸力 机器安装在移动机器下部结构上，1.5 mtr。左和右长辊道输送机 左侧带有刻度和停止滑块 规格： 电机： 400 V / 5.0 kW 转速： 2800 rpm 切割长度：420 mm（90 时） 切割高度：200 mm（90 时） 水平斜接范围： 45- 90- 20 垂直斜接范围： 60 - 90 - 30 锯片直径： 520 mm 吸嘴： 100 mm 重量： 490 公
Graule Model ZS 135/N (tilting and swivelling) Motor: 2 or 3 KW 400 Volts Cutting height: 135 mm – 90°, 92 mm – 45°tilted Stroke: 460 mm – 90° and 320 mm – 45° Saw: 350 mm Swivelling: 45° – 90° – 25° Titling: 45° – 90°
Graule ZS170N 3D – with NC controlled tilting & swivelling Manufacturer: Graule – with Tigerstop NC-control Type: ZS170N – with Tigerdrive control (tilting & swivelling) M-Nr.: 2014/78/27 Year: 2014 Graule ZS170N Motor: 3 kW Saw: ø420 mm As zaagblad: ø40 mm Cutting height: 170mm Swivelling: 45° – 90° – 25° Tilting: 0° – 45° Stroke: 450 mm – 90° 310 mm – 45 ° Saw: ø420 40 48 WZ Neg. (used) Machine stand: Inclusive
Graule RO-ST60 Roltafel met aanslag en pneumatische rem Merk: Graule Type: RO-ST60 Lengte: 3.0 meter (netto) Maat instelling: Grof en fijn verstelling Nauwkeurigheid: 0.1 mm Condition: functional checked
年份：2017 - 技术高效，准备就绪——完成全服务后 - 圆盘直径：420毫米 - 冷却装置 - 双面气动夹具 - 液压进给制动器 - 减压
年份：2006年 - 技术高效，准备就绪——完成全服务后 - 电机：3千瓦 - 两个切割盘都可以倾斜+/- 45度 - 切割盘：450毫米（垂直），400毫米（水平） - 冷却与润滑系统 - 压缩空气准备站 - 双轴电子角度指示
年份：2016 - 技术高效，准备就绪——完成全服务后 - 电机：3千瓦/400伏 - 铣削直径：250毫米 - 铣削宽度：305毫米 - 材料止挡可双向旋转，最多20° - 垂直和水平气动型材夹持 - 压缩空气准备站 - 冷却与润滑系
- 400伏，带制动器的三相电机，2千瓦 - 420毫米圆盘 - 切割高度 170 mm - 切割长度 410 mm - 液压进给制动器 - 冷却系统 - 压缩空气制备站 - 两侧气动压
Number of motors: 1 Stück 0: , mm Control: , 0 cutting width: 115 und 82 mm Cutting height: 55 mm Motor output: 2.0 kW machine weight ab.: 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----------------------------------------------- Brief manufacturers description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----------------------------------------------- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Ma ...
saw blade diameter: 350 x Ø 30/40 mm cutting diameter: 135 mm cutting length: 430 mm dimensions of saw-blade: 350x3,0/2,4x40 mm turning speeds: 3800 U/min Dust suction hood: 100 mm total power requirement: 3,0 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 10 ...
saw blade diameter: 520 x Ø 50 mm cutting diameter: 200 mm cutting length: 420 mm Cutting height at 45°: 140 mm dimensions of saw-blade: 520x3,6/3,0x50 mm turning speeds: 2800 U/min Dust suction hood: 100 mm total power requirement: 3,0 kW weight of the machine ca.: 310 kg. range L-W-H: 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) ...
saw blade diameter: 420 x Ø 40 mm cutting diameter: 170 mm cutting length: 410 mm dimensions of saw-blade: 420x3,2/2,4x40 mm turning speeds: 3500 U/min Dust suction hood: 100 mm total power requirement: 3,0 kW weight of the machine ca.: 120 kg dimensions of the machine ca.: 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. ad ...
切割宽度：90：410 / 45：290 毫米 切割高度：170 毫米 45 英寸切割高度：115 毫米锯片直径：420 毫米 机器重量：150 公斤 锯片：40 毫米锯片 转速：3350 U/min 本广告数据由 ModulMWS - LogoTech oHG 的软件解决方案创建
切割宽度：90：410 / 45：290 毫米 切割高度：170 毫米 45 英寸切割高度：115 毫米锯片直径：420 毫米 机器重量：150 公斤 锯片：40 毫米锯片 转速：3350 U/min 本广告数据由 ModulMWS - LogoTech oHG 的软件解决方案创建
