sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 102)
Diamètre de rotation au-dessus du lit/glissière de face/manivelle : 460mm / 258mm / 785mm, largeur centrale : 1016mm, largeur du lit : 300mm, alésage de broche : 58mm, vitesse : 2000rpm, diamètre vis mère/piquant : 35mm / 65mm, réglage de la plume : 127mm. Dimensions de la machine X/Y/Z : env. 1900mm/850mm/1200mm, poids : env. 1650kg. Documentation disponible. Une inspection sur place est possible. Devrait être disponible à partir de la fin du mois de mai 2025.
Hauteur centrale : env. 230 mm, largeur centrale : env. 1000 mm, diamètre orbital au-dessus du lit : env. 480 mm, diamètre orbital au-dessus du support : env. 200 mm, alésage de la broche : env. 45 mm, plage de vitesse de la broche : 2000 tr/min, puissance d’entraînement : 4 kW, dimensions de la machine X/Y/Z : env. 2400 mm/1000 mm/1500 mm, poids : env. 1700 kg. Une inspection sur place est possible.
Diamètre de l’oscillation au-dessus du lit/glissière du lit : 480 mm/340 mm, longueur de rotation : 800 mm, entraxe : 1000 mm, diamètre de l’oscillation dans l’évidement : 540 mm, alésage de la broche : 52 mm, vitesse : 1400 tr/min. Cône de piquants : MK4, réglage manuel de la plume : 160 mm, déplacement de la partie supérieure : 10 mm. Dimensions de la machine X/Y/Z : env. 2600mm/1100mm/1350mm, poids : env. 2300kg. Une inspection sur place est possible.
Un tour vertical REM à commande CNC est disponible. Diamètre de travail : 2500mm-7000mm, hauteur de travail : 1000mm, contrôle : Siemens 840D. Y compris les outils entraînés. Une inspection sur place est possible.
A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.
A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.
Un tour vertical CNC EMAG est disponible. Diamètre du mandrin : 250 mm, diamètre orbital : 260 mm, course X/Z : 570 mm/200 mm, déplacement rapide X/Z : 60 m/30 m/min, force d’avance X/Z : 5 kN, diamètre de la vis à billes X/Z : 40 mm, diamètre du roulement de la broche avant : 110 mm, vitesse : 4500 tr/min, puissance : 18/28 kW, diamètre de la tige : 40 mm, puissance des outils entraînés : 12 kW, vitesse : 6000 tr/min. Dimensions de la machine X/Y/Z : env. 2700mm/2100mm/2400mm, poids : env. 7000kg, temps d’allumage : 50416h, temps automatique : 9016h. Documentation disponible. Une inspection sur place est possible.
Diamètre de l’oscillation au-dessus du lit/toboggan frontal : 570 mm/420 mm, diamètre de tournage : 420 mm, longueur de tournage : 635 mm, course transversale X/Z : 220 mm/635 mm, vitesse : 5000 tr/min, alésage de la broche : 79 mm, diamètre max. de la barre : 65 mm. Positions d’outils : 12, outils entraînés : 6, porte-outil : VDI 30, déplacement rapide X/Z : 24m/30m/min. Dimensions de la machine X/Y/Z : env. 3500mm/2500mm/2000mm, poids : env. 4500kg. Une inspection sur place est possible.
Axe X : 607 mm, axe Z : 286 mm, vitesse de la broche : max. 6000/min, contrôle : Fanuc 32i A, longueur : 4600 mm, largeur : 1600 mm, hauteur : 2700 mm, poids : 2,1 t, heures de fonctionnement : 34 536 h. Avec automatisation FMB Unirobot LR MATE 200iD7L-P2TB, broche de meulage Jäger HF-Spindle, mandrin MicroCentric 4-410-3-QC, système de mesure MARPOSS avec compensation dimensionnelle automatisée, filtre à brouillard d’huile S400, filtre à bande Knoll KF110/500, convoyeur à bande articulée 320 S1 et autres accessoires. Une inspection sur place est possible.
Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible.
A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible.
Diamètre de tournage au-dessus du lit/glissière frontale : 420 mm/280 mm, longueur de tournage : 1000 mm, alésage de la broche : 78 mm, vitesse max. : 3550 tr/min, puissance d’entraînement : 35 kW, positions de l’outil : 12 (avec outils entraînés), porte-outil : VDI50, déplacement rapide : 10 m/min. Dimensions de la machine X/Y/Z : env. 4100mm/2300mm/2200mm, poids : env. 10000kg, commande : Siemens 840T avec axe C. Après le remplacement de la batterie tampon, le logiciel de la machine a été supprimé, ce qui a entraîné la suppression de certains paramètres de la machine sans documentation et le fonctionnement automatique est actuellement impossible. Disponibilité prévue à partir du 1er trimestre 2025.
A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible.
Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.
Diamètre de tournage : 200 mm, longueur de tournage : 400 mm, diamètre de tournage : 420 mm, diamètre de la barre : 60 mm, diamètre max. du mandrin de broche : 160 mm, vitesse : 5000 tr/min, tourelle : 2, positions : 2x14, déplacement rapide X/Z : 20 m/min/30 m/min. Dimensions de la machine X/Y/Z : env. 7500mm/2100mm/2100mm, poids : env. 4500kg. Documentation disponible. Une inspection sur place est possible.
turning diameter: max. 560 mmturning length: 600 mmcontrol: 840D powerline Siemensgreates pass round over bed: 680 mmSwing dia. over traverse guideway: 565 mmcentre distance: 620 mmMain spindle:: turning speed range - main spindle: 20 - 5.000 min/-1power capacity - main spindel: 25 / 37 kWmax. Torque: 390 Nmspindle nose: 170H5 spindle bearing diameter: 120 mmusable bar diameter: 65 mmmax. chucking diameter: 250 mmC-Axis: 0,025° / 360 °Subspindel:: Spindle speed range subspindle: 20 - 7.000 min/-1power capacity - Sub spindle: 25 / 33 kWmax. Torque: 213 Nmspindle bearing diameter: 90 mmspindle bore: 57 mmspindle nose: 140H5 C-Axis: 0,025° / 360 °turret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Spindle speed - driven tools: max. 4.500 min -1power capacity - driven tools: 12,2 kWtool taper: VDI 40 DIN 69880Tool dimensions with square shank: 40 mmaxis st ...
turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 4000 mmswing diameter: 5500 mmturning height: 2600 mmturning speeds: 60 U/minmain drive motor: 60 / 75 kWControl: Fanuc 31iA workpiece weight max.: 45 tmilling head speed: 1500 U/minram head dimension: 400 x 400 mmmilling spindle drive: 22/25 kWtotal power requirement: - kWweight of the machine ca.: 140 tdimensions of the machine ca.: 12 x 10 x 9 mequipped with:- CNC control Fanuc 31iA- C-axis (0.001°)- Telescopic covers for the cross rail and column guides- 16-position automatic tool changer- Angular milling head- Chip conveyor- coolant through Spindle- Hydrostatic Bearing for the Main Axis Table- High Precision Roller Bearing- Table Main-axis Motor to Control and Drive the C-Axis- Synchronized 2-motor Drive Control System for Driving W-Axis for Cross Rail Movement- Backlash removal technology available when the C-axis is removed from the system.The data for this ad ...
turning diameter: max. 366 mmturning length: 705 mmcontrol: M 730 BM MAPPS IVgreates pass round over bed: 920 mmSwing dia. over traverse guideway: 742 mmMain spindle:: turning speed range - main spindle: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A-8 spindle bearing diameter: 140 mmspindle bore: 91 mmmax. usable bar diameter: 80 mmchucking diameter: 250 mmSubspindel:: Spindle speed range subspindle: 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle nose: JIS A2-5 spindle bearing diameter: 85 mmspindle bore: 43 mmmax. usable bar diameter: ( - ) mmchucking diameter: 170 mmaxis stroke:: x-travel: 260 mmz-travel: 795 mmY - Axis: +/-50 mmrapid traverse ( X / Y / Z ): 30 / 10 / 30 m/minturret:: number of toolpositions: 12 pos.tool taper: BMT 60 Schank height for square tool: 25 mmDrill shank diameter: 50 mmturret change time: 0,27 sec.Driven Tool P ...
workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW
Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range
turning speeds: 6000 U/minx-axis: 550 mmz-axis: 200 mmrapid traverse: 30/20 m/minfeed: 11 m/mincontrol: Siemens 840 C total power requirement: 35 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: m- speeds: [1/min.] : 6.000- torque [Nm]: 480- swing diam.: 290 mm- power: [kW] 34- chuck diam. 200 mm- turret: 12-fach, VDI 40, Sauter- driven tools 7,8 KW,- x -travel: 550 mm- z- travel: 200 mm- rapid travel: (X/Z) [m/min] 30 / 20- feeds: (X/Z) [m/min.] 11 KN- connected load: [KW] 36 kW- machineweight: [kg] 6.500- chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm- Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain- parts conveyor for feeding parts into the machine- Specification:- Overhauled in 2007 for approx. €50,000, complete headstock replaced.- Feed unit replacedThe data for this ad was created with ModulMWS - the software solution of ...
: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hauteur du centre : 102 mmEntraxe : 450 mmAlésage de la broche : 25 mmVitesse de la broche :: 220 - 2600 Poids de la machine env. : tDimensions de la machine env. : mL’exhaustivitédes accessoires n’a pas été vérifiée Les armoires ne sont pas incluses dans la livraison
swing dia.: 600 mmturning diameter: 310 mmturning diameter over slide: 355 mmspindle bore: 53 mmbar capacity: 45 mmturning speed range: 6000 U/minturning length: 388 mmtravel -z axis: 400 mmtravel -x axis: 220 mmturret (x-stations): 12 control: SIEMENS 828D (Touch) c-axis: 0,001° 0total power requirement: 20 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: LTH 3,7 x 2,0 x 2,0 mIncludes preparation for automation (loading robot)Year of manufacture: 11/2017, delivery: 2018- Automatic door- 12-station tool turret, driven at 5,000 rpm- Workpiece catcher- RENISHAW touch probe, automatically retractable- Tailstock- Chip conveyor- Coolant pumpAccessories:Including collet chuckIncluding 2 x driven tool holders (radial + axial)Including 9 x fixed tool holdersIncluding USB & LAN interfaceIncluding manualsThe data for this ad was created with ModulMWS - the software solution of Lo ...
turning diameter: 700 mmturning length: 1250 mmcontrol: TX8_i total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6,0 x 2,5 x 2,2 mCNC control TX8_i9 CNC axes (X1, X2, Z1, Z2, Y1, B1, B2, C1, C2)Software functions:Tool life monitoring,Polyform, 3D-Helical IP, synchronous threads without L compensation,WOP Traub Win_Flex IPS incl. Mouse,MAIN SPINDLE (direct drive, adjustable hollow shaft motor)Spindle connection A-11 > DIN 55026/ 55021Alignment and switching deviceHollow clamping cylinder > spindle passage max. 102 mm speed max. 3,000 rpmFront bearing dm170 mmDrive power 100/40% ED 53 / 68 kW, torque 675 / 900 NmC-axis resolution 0.001 °Spindle locking for extreme roughing work 2.5 °Counter spindle (direct drive, adjustable hollow shaft motor)Spindle connection A-11 > DIN 55026/ 55021Alignment and switching deviceFull clamping cylinder SINS-140 > Sp ...
number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
