sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 102)
Ici, nous avons une tourelle Weiler DZ 65, tourelle arrière Duplomatic 16 plis, 2 broches, tête de collet pour les deux broches, outil entraîné sur tous les points de rev, Convoyeur à copeaux, liquide de refroidissement à 2 broches, éjecteur à ressort 2e broche, connexion au alimentateur de tige, retrait des pièces via plateau goutte-à-goutte, tapis roulant pour pièces, divers tubes d’insertion de broches, convoyeur à puces, alimentation en matériau Irco Profimat 3m,
Centre de rotation vertical à deux broches - Siemens 840 D de commande - Plateau machine VSC 400 Duo - 2 tourelle à disques de 12 x diamètre 40 mm, entraînée - 2 x station supplémentaire de forage et de contre-pelletage - Système de transport ouvert des pièces - Unité de transfert et de tournage - Interface avec un système de traitement externe - Alimentation centrale du centre de refroidissement : pompe haute pression 70 bars - Souffler le dispositif de prise et les dispositifs de serrage - Mesure de la pièce - Surveillance des outils - Option réseau Emag - Gestion des outils frères Diamètre circonférentiel : 260 mm X-course 860 mm Course Z 200 mm Broche principale 2 vitesse maximale jusqu’à 4500 1/min Espacement de la broche : 1055 mm Moteur principal 2 Moteur AC asynchrone 6ß/100 % ED 39/28 KW Couple maximal 460 Nm Traversée rapide x/ z ...
Diamètre de la barre : 8 mm à 65 mm (matériau rond) Longueur de la canne (33L) : environ 3,3 mètres Type de machine : tête de broche fixe (tours automatiques) Type de chargeur : MP (chargeur multiple)
A Hitachi Seiki CNC turning center in need of repair is offered for sale. Max. turning diameter: approx. 255mm, max. turning length: approx. 380mm, X/Z travel: 200mm/400mm, spindle speed: up to approx. 3600rpm, spindle motor power: 11kW, bar capacity: approx. 64mm, spindle bore: approx. 78mm, chuck size: approx. 255mm, tool turret: 10/12-station, tailstock taper: MT5, control: SEICOS-L MULTI, version V3R5.G. Weight: approx. 4300kg. A tool holder on the chuck is broken. An on-site inspection is possible.
Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. ...
A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.
Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the ma ...
Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...
turning diameter over bed: 500 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: ? kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,511,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Miyano BNA-42 MSYYear of manuf. : 2012 Control : Mitsubishi M70 Turning length : 100 mm____________Description:Mainspindle:Technology:Belt-driven spindleSpeed:6.000 rpmPower (max.):7,5 kWTorque (max.):60,8 NmBarcapacity:42 mmC-Axis:0,001°Workpiececlamping:Collet chuck, Type 173ESubspindle:Technology:Belt-driven spindleSpeed:5.000 rpmPower (max.):5,5 kWTorque (max.):38,7 NmC-Axis:0,001°Workpiececlamping:Collet chuckMovement in X/Z:140/310 mmRapid travers in X/Z:12 m/minToolcarrier (X/Y/Z):Technology:Turret with 8 stationsTooldrive:5.000 rpmMovement in X/Y/Z:140/70/235 mmRapid travers in X/Y/Z:20 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Cooling pumpRawmaterialfeed:Bar laoder, IEMCA Master 80 HFFinishpart removal:Part catcher with conveyorbeltFire-extinguishing unit:Kraft + BauerFurther Equipment:Trafo
Traub TNX 65Year of manuf. : 2011 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmBarcapacity:65 mmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Ejector:Hydraulic with flushToolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier II (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier III (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 ...
X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool ...
Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.
La machine était entretenue annuellement par Okuma Centre de tournage et fraisage CNC avec 9 axes CNC, Okuma MacTurn 350 W, Année de fabrication 2004, OSP-E 100L, Magazine supplémentaire, Compartiment à magasin 80 Ww, Axe principal avec axe C, axe contraire avec axe C, Axe Y coulissière / broche de fraisage, Montage du HSK 63, L’axe B sans marche comme broche de fraisage, Largeur centrale 1500 mm, Alésage de la broche 80 mm, Circulation maximale 550 mm, Pivot 350 mm, Revolver inférieur 12 pli avec revolver appliqué. outils, Système de filtration compacte Interlite 900 l, aspiration, Durée de fonctionnement de la broche environ 18300 h, Päneförderer, Bras de présélection du changeur d’outils complètement renouvelé, Refroidissement haute pression, Bras de mesure WZG, Changement d’outils révisé, Axe principal Kitagawa B - 210, Sous-broche ...
Weiler DZ 40, Année de fabrication 2008, Contrôle Siemens 840 D, Course X/Z 200/350 mm, Diamètre de rotation : 180 mm, Bobmkney Ev Iujrzedf Circulation Ø max. 560 mm, Axe Y +/- 25 mm, Axe Q / crosse arrière programmable, Axe Q : 360 mm, Système de mesure de l’axe Q rotatif du système, Crosse arrière MK 4, Axe principal max. passage de tige 42 mm, Alésage de la broche 52 mm, Traversée rapide X/Z/Q 30/30/20 m/min, Tourelle 16 vitesses - toutes les stations entraînées, VDI 25, Diamètre de l’arbre 25 mm, Demandé. Outils jusqu’à 4 500 tr/min, Plateau de pièces, accessoires, Demandé. Porte-outils, détenteurs rigides,
Maître de Guilde CTX 510 Contrôle : Siemens 840 D avec atelier - Turn Année de fabrication : 2004 Course X / Z : 300 / 1050 mm Revolver : 12 vitesses Porte-outils : VDI 40 Bsbmezmxz Roknrzodf Vitesse de broche jusqu’à : 3 500 tr/min Passage de barre : 90 mm Déplacement de la plume : 150 mm Contre-stock Refroidissement 20 bars Taille du mandrin : 315 mm Heures de broche approximativement : 14 000 Des tailles de lots de 0 à 5 ont été produites sur la machine La programmation était effectuée sur la machine
This 4-axis Mazak QTN-200M was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QTN-200M machine we have for sale. Contact us for further details.
Manual lead screw and feed rod lathe manufactured in 2018. This Optimum TH 4610 features a distance between centers of 1060 mm and a swing over bed of 460 mm. It has a spindle speed range of 25 – 2000 U/min and can handle a maximum workpiece weight of 300 kg. If you are looking to get high-quality turning capabilities, consider the Optimum TH 4610 machine we have for sale. Contact us for further details.
A Krewema CNC large-format semi-frontal lathe is available. X/Z travel: 1500mm/850mm, center height: 475mm, distance between centers base/bed extended: 1685mm/2685mm, max. turning diameter over bed/cross slide: 935mm/620mm, max. swing diameter in the gap: 1600mm, main spindle bore: 155mm, tailstock quill diameter: 140mm, quill taper: MK6, quill stroke: 300mm, tool turret: Sauter, tool stations: 4, 3-jaw chuck diameter: 630mm, faceplate: Schunk, faceplate diameter: 1000mm, control: Siemens 840D sl ShopMill. Including coolant system, external coolant nozzles and chip conveyor. Documentation available. An on-site inspection is possible.
Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details.
A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible.
Contrôle Philips B2T Diamètre circonférentiel : 640 mm Diamètre d’usinage longitudinal 550 mm Diamètre d’usinage sur la tourelle à tambour : 450 mm Longueur de tournage : 1000 mm Vitesse de la broche 2 240 min-1 Alésage de la broche 103 mm Tourelle à tambour 12 vitesses VDI 60 Convoyeur à puces
Key data: 110 mm, 450 mm, 5600 1/min
Année de fabrication 1996 Commande : TX8 F y compris le distributeur Simag de 42,1 bars Année de construction : 2003 L’alimentation en barres est d’environ 3,2 m pour 3 m de barres. avec beaucoup d’accessoires La machine est toujours sous alimentation et disponible à la dernière minute
Monforts DNC 3Year of manuf. : 2000 Control : Siemens 840D - Powerline Turning diam. : 150 mm____________Description:Mainspindle:Speed:5.000 rpmPower (max.):25 kWTorque (max.):263 NmBarcapacity:65 mmSubspindle:Speed:5.000 rpmPower (max.):25 kWTorque (max.):263 NmToolcarrier I (X/Z):Technology:Turret with 12 stationsTaper:VDI 30Tooldrive:4.500 rpmMovement in X/Z:170/445 mmRapid travers in X/Z:24/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI 30Tooldrive:4.500 rpmMovement in X/Z:170/445 mmRapid travers in X/Z:24/30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Coolant pumpsRawmaterialfeed:Interface Barloader:Attention:Displayed Clamping devices and tools are NOT included in our offer!
turning diameter: 720 mmturning length: 4000 mmcontrol: Siemens 805 turn - diameter over facing slide: 360 mmspindle diameter: 100 mmspindle passage: 100 mm3-jaw-chuck diameter: 400 mm4-jaw-chuck diameter: 250 mmsteady: 360 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: mIncluded:4-jaw turrets and coolant.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Ma ...
turning diameter over bed: 1300 mmturning diameter over slide rest: 900 mmturning length: 8000 mmspindle diameter: 153 mmtotal power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mTurning length (mm) 8000Max. turning diameter (mm) 1300Max. turning diameter over slide (mm) 900Max. turning diameter in the offset (mm) 1580Spindle diameter (mm) 153Speed 7 - 500 (12x)kW 37Voltage 400VHz 50Powered tailstock, powered quill, coolant system, 4-jaw chuck Ø 1,000 mmSteady rest roller type Ø 60 - 300 mmSteady rest roller type Ø 200 - 600 mmTaper turning attachment, 4-way toolpostThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...
