tours machines d'occasion à vendre (3,075)

: Doosan (Daewoo) Lynx 220 tour CNC – un centre de tournage compact et éprouvé pour la production en série et l’usinage de précision. Informations clés • Fabricant : Doosan Infracore Co., Ltd. (Corée) • Modèle : Lynx 220 • Système de contrôle : FANUC • Numéro de série : L220122651 (lu sur la photo) • Année de fabrication : 2006/07 • Alimentation : AC 200/220 V, 3~, PE, 50/60 Hz • Puissance nominale : 11,0 kW • Charge maximale : 26,68 kVA • Courant pleine charge : 62,13 A • Courant de court-circuit / interruption : 17 000 A Note importante L’extracteur/unité de filtration SEI Filtration Oil Spray montée sur la machine n’est pas incluse dans la vente. Auction-ID: A7-46285-12

Tournoi CNC Doosan (Daewoo) Lynx 220 – un centre de tournage compact et très populaire pour la production en série et l’usinage de précision. Informations clés • Fabricant : Doosan Infracore Co., Ltd. (Corée) • Modèle : Lynx 220 (désignation sur la plaque nominative : Lynx 220...) • Système de contrôle : FANUC (panneau marqué « Série FANUC » visible sur les photos) • Année de fabrication (d’après la plaque nominative) : 2005/10 • Alimentation (d’après la plaque nominative) : CA 200/220 V, 3~, 50/60 Hz • Puissance nominale (d’après la plaque nominative) : 11,0 kW • Charge maximale (d’après la plaque nominative) : 23,68 kVA • Courant en pleine charge (d’après la plaque nominative) : 92,1 A • Courant de court-circuit / d’interruption (à partir de la plaque nominative) : 17 000 A • Numéro de série (d’après la plaque nomi ...

turning diameter: 340 mmturning length: 575 mmswing dia.: 500 mmX-Axis movement: 215 mmY-Axis movement: 100 mmZ-Axis movement: 605 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 15/11 kWspindle bore diameter: 76 mmbar capacity: 65 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 7,5 kWspindle bore: 53 mmspindle distance: 575 mmtotal power requirement: 26,9 kVAWeight: 4,8 tdimensions of the machine ca.: 2,7 x 1,7 x 1,75 m- Mazatrol SmoothG CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis-- Turning Speed: 4500 U/min, 5,5kW- 3-jaw chuck-- Main: 8-- Counter: 6- Chip conveyor- Coolant system- ...

turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 490 mmturning length: 2000 mmcontrol: Heidenhain MANUALplus 4110swing diameter over slide rest: 280 mmspindle turning speed range: 1 - 3000 U/minspindle bore: 93 mmrapid power traverse in X-and Z direction: 7 / 10 m/minpower capacity: (100/60 % ED) 15/20 kWtailstock quill diameter: 70 mmtailstock quill stroke: 160 mmtailstock quill taper MT: 5 max. workpiece weight between centres: 1000 kgmax. workpiece weight -without tailstock: 500 kgweight of the machine ca.: 3,6 tdimensions of the machine ca.: mFeatures:Control Heidenhain MANUALplus 41102 steady restsManual chuck with jawsTool holder with insertsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hauteur centrale : 450 mm Distance centrale : 6150 mm Alésage de la broche : 140 mm Diamètre de rotation sur plateau : 900 mm Diamètre de rotation sur la culasse : 660 mm Entraînement de la broche : 15 kW Dimensions externes : Breite 1750 mm longueur : 9000 mm Hauteur : 1650 mm Poids : 8000 kg Vitesse de la broche : : 11-500 UpM Avec un mandrin, un colet et une plaque frontale Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

bar material dia.: 32/38 mmspindle passage: 44 mmturning length: 320 mmturning speeds: 200-8000 U/minc-axis: 0,001 Gradgripping station: 32/38 mmturning length: 120 mmturning speeds: 200-8000 U/minc-axis: 0,001 0number of tools: 13 fixnumber of milling stations: 4+5 drivencontrol: Mitsubishi Meldas M70 Number of axles: 5+2 St.total power requirement: 7,5 kWweight of the machine ca.: 2850 kgdimensions of the machine ca.: 2,5 x 1,4 x 1,75 + FMB mbar loader: FMB turbo 3-36 fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloaderFMB turbo 3-36equipped with swarf & coolant tank, fire distiguisher.ON/OFF 29.564h (status 24.03.2026)Running hours 26.607h (status 24.03.2026)GBL function (standard)LFV function: noThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 410 mmturning length: 800 mmcontrol: Sinumerik 840 D ERGOLine Siemensgreates pass round over bed: 700 mmmax. turning diameter: 410 mmtravel -x axis: 300 mmtravel -z axis: 850 mmturning speed range - spindle: max. 4.000 U/minchucking diameter: 260 mmspindle bearing diameter: 130 mmpower capacity: 40% ED = 34 kWpower capacity: 100 % ED = 25 kWmax. Torque: 280 NmC-Axis: 0,01 °turret (x-stations): 12 tool taper: DIN 69880 / 40mm driven statition: 6 posSpindle speed driven tools: ~ 4.000 min -1power capacity - driven tools: 40% ED = 11,3 kWpower capacity - driven tools: 100 % ED = 5,6 kWrapid traverse ( X / Y / Z ): 30 m/minTailstock:: tailstock adjustment: 800 mmmorse taper: MK 5 total power requirement: 65 kVAweight of the machine ca.: 6,2 tdimensions of the machine ca.: 5,5 x 3,0 x 2,5 mChip conveyor: Tool drive mechanisum: Tailstock: Three Jaw Chuck: Schunk THW Plu ...

: neu : Bulgarien : 55100 €: 1041.39 €: 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: 120 : 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3600 mm: 1500 mm: 1650 mm: 3110 kgIn contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.driven by variable speed control (3 steps)3-axes digital readout Fagor with CSS (constant surface speed)quick change toolp ...

bar material dia.: 20 mmspindle passage: 22 mmturning length: 205 mmControl: Siemens Yaskawa bar material dia.: 20 mmturning speeds: 500-10.000 U/minc-axis: 0,001 °gripping station: 20 mmturning length: 30 mmpositive location each: 0,001 °Number of tools: 10 fest / fix St.total power requirement: 2,2/3,7 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,6 x 1,2 x 1,8 +FMB mdriven tools: 4+3+3 fire distinguisher: Kraft & Bauer bar loader: FMB minimag 18 1,5m Stangehigh pressure pump: ja/yes parts conveyor: ja / yes CNC-swiss type machine Star SR20-R, built 2002 with FMB Minimag 18,in good condition, comes from medical factory.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre de tournage : 340 mm. longueur de tournage : 1000 mm. contrôle : Mazatrol SmoothC besoin total de puissance : kW. de la machine environ : tdimensions de la machine vers : mLes données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

turning diameter: 350 mmturning length: 650 mmcontrol: 840 D SL ShopTurn Siemensgreates pass round over bed: 385 mmSwing dia. over traverse guideway: 350 mmMain spindle:: turning speed range - main spindle: 0 - 4.500 min/-1power capacity - main spindel: 11,5 / 8 kWmax. Torque: 340 Nmspindle diameter in front bearing: 130 mmspindle bore: 87 mmbar material dia.: max. 65 mmmax. chucking diameter: 250 mmspindle head: 170 h5 C-Axis: turret:: number of toolpositions: 12 pos.Shank diameter: DIN 69880: 30 mmDriven Tool Stations:: Number of driven toolspositions: 6 pos.Spindle speed - driven tool stations: max. 4.500 min -1power capacity driven tool-stations: 5,5 kWaxis stroke:: x-axis: 255 mmz-axis: 800 mmTailstock:: tailstock: 680 mmtaper of center: MK 4 clamping capacity: 6,8 kNfeeds:: feed speeds: 0 - 30.000 mm/minrapid traverse ( X / Y / Z ): 30 / - / 30 m/minFeed force ( X / Y / Z ): ...

Diamètre de la plaque frontale : 4500 mm, diamètre de rotation : 5000 mm, hauteur de tournage : 2500 mm, poids max. de la pièce : 63 tno. des glissières : 2 max. course du carré : 1600 mm. Plage de vitesse de rotation sur plaque : 0,3 - 32 U/minAnzahl der Drehzahlstufen : 4 besoins en puissance totale : 130 kWweight de la machine, environ : 145 t-dimensions de la machine, environ : 6,6 x 11,4 x 8,4 m - DRO - 2 Béliers pivotants (-15 / +40) Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

turning diameter over bed: 1090 mmturning diameter over slide rest: 700 mmturning length: 6000 mmcentre distance: 6000 mmspindle bore: - mmspindle taper: - turning speed range: U/minpower requirement: 30 kW3-jaw-chuck diameter: mmquick change toolholder: 4 fach Stahlhalter taper in tailstock-quill: MK 6 dia. of quill: 125 mmquill stroke: 260 mmtotal power requirement: 30 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 8,2 x 1,8 x 1,82 m- rapid traverse- tail stock- DROThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 455 mmturning diameter over slide rest: 285 mmturning length: 1.000 mmcenter height over bed: 225 mmcentre distance: 1.000 mmdigital readout: 2-Achsen ANILAMbed width: 330 mmspindle taper: KK 6 DIN 55027spindle bore: 45 mmturning speed range: 16 - 1.000 U/minpower requirement: 3,0 / 4,2 kWtaper in tailstock-quill: MK 4 dia. of quill: 62 mmquill stroke: 145 mmcoolant: voltage: 400 Vtotal power requirement: 4,5 kWweight of the machine ca.: 1,95 tdimensions of the machine ca.: 2,45 x 1,10 x 1,80 m- Serial-No.: 29-2561- ANILAM 2-axis digital readout- 4-jaw tool holder- coolant equipmentATTENTION!Machine is sold without a chuck.Upon request and for an additional charge,the following 3-jaw spiral chuckscan be included:- CENTER Ø 200 mm = 780.00 EUR- CENTER Ø 250 mm = 1,030.00 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre de la plaque frontale : 1000 mmmax. couple sur la broche : 900 puissance totale requise : 17 kWpoids de la machine environ : 6,1 tdimensions de la machine environ : mUn tour de tournage vertical avec rail transversal fixe Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 570 mmturning speeds: 45 - 1800 U/mincentre height: 210 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 3,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,6 x 1,1 x 1,7 mProfessional industrial machinedigital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotatingMultifix steel holder.Machine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 165 mmturning length: 800 mmtotal power requirement: 3 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 2 x 1 x 1,5 mNo. 1009Lathe WEILER LZ-300Speed range 24-2800 1/min.Feed rates 0.013-1.27 mm/minSpace requirement approx. 19 0x 700 mm,Weight approx. 700 kg.The e-lead spindle is removed from the machine3-jaw chuck, collet quick-clamping device with various collets, 1 tool cabinet with various accessoriestool cabinet with various accessories.Working area: 165 x 600Drive: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 760 mmturning length: 1540 mmcontrol: Fanuc 31i-B dimensions of machine: 5500 x 2700 x 3110 mmchip conveyor: 6900 x 2400 mmtotal power requirement: 94,42 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: mTurning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle.Condition: Very well preserved, machine comes from a company liquidation.Time recording:Control unit on: 13127 hoursRuntime: 3833 hoursProcessing time: 2835 hoursThe upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning.Fanuc 31i-B CNC controlSwing diameter over bed: 1000 mmMaximum turning diameter: 760 mmMaximum turning length: 1540 mmMaximum bar diameter (manual/continuous): 76/76 mmY-axis travel: 230 mm (±115 mm)Clamp (counter s ...

turning diameter: 320 mmturning length: 500 mmcontrol: Fanuc Oi-TD total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-TD cnc controlcollet chuck device10-fold revolvertail stockchip conveyorTechnische Daten: / technical detailsmax. Drehdurchmesser / max. turning diameter 320 mmmax. Drehlänge / max. turning length 500 mmX-Weg / X-travel 180 mmZ-Weg / Z-travel 520 mmmax. Drehzahl / max. spindle speed 6000 UpM /rpmAnzahl der Revolverplätze / number of tool places 10 Gewicht ca. / weight ca. 3200 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1790 mmturning diameter over slide rest: 1250 mmturning length: 5000 mmfaceplate: 1250 mmworkpiece weight: 4500 kgcontrol: Siemens type: System 8 T mmturning speeds: 1,1-300 U/minsteady: mmsteady: mmtotal power requirement: 72 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this  ...

turning diameter over bed: 1250 mmturning diameter over slide rest: 900 mmturning length: 5000 mmfaceplate: 1250 mmworkpiece weight in steadies max.: 20000 kgsteady: mmsteady: mmworkpiece weight: 16000 kgtotal power requirement: kWweight of the machine ca.: 22 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with Mo ...

faceplate diameter: 2500 mmmax. swing diameter over bed: 2700 mmturning height: 2500 mmControl: Siemens 840D CNC workpiece weight max.: 30 tworkpiece dia.: 2500 mmCrossbar travel distance every 100 mm: 1200 mmPiston rod: 1500 mmram diameter: 250 x 250 mmtraversing speed: 8 m/minMax. vertical feed rate: 6000 mm/minMax. cross feed: 8000 mm/minSpeed of the machine table: 180 U/mintool changing time: 1 mincutting speed: 140 m/minCutting depth: 14 mmPower Capacity of main drive: 100 kWweight of the machine ca.: 47 tdimensions of the machine ca.: 12,5 x 8,0 x 6,7 mFeatures/Accessories: - Crossbars every 100 mm, including locking mechanism- 2 ram units with a cross-section of 250 x 250 mm, travel distance 1500 mm- Both ram units can be moved through the center (100 mm each, i.e., both ball screws are offset from each other with collision protection- ZF gearbox for main drive: AC 100 kW / S1 Sie ...

swing diameter: 2000 mmturning height: 1800 mmControl: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/mincross rail adjustment - vertical: 1200 mmcross rail adjustment - horizontal: +/- 1150 mm: 1500 mmbit feeder section: 240 x 240 mmMinimum immersion diameter: 340 mmcutting capacity: 50 kNmax. torque on the faceplate: 50000 Nmspeed range step 1: 2,8 - 80 U/minspeed range step 2: 12 - 315 U/minMax. clamping weight: 12000 Kgpower capacity faceplate: 105 kWweight of the machine ca.: 33 tdimensions of the machine ca.: 10 x 5 x 6,5 mFurther technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/minFeatures/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyo ...

Un dépôt de 1500,00 € est requis pour soumettre une offre sur ce lot. Pour obtenir les coordonnées bancaires nécessaires au transfert, veuillez contacter le représentant de la vente aux enchères au alessandro.icardi@surplex.com. Diamètre de la barre 80 2 mm Taille maximale des outils pour usage externe : 25 mm Taille interne maximale de l’outil 40 mm Axe X de course 225 (220+5) mm Axe Z de déplacement 1125 (1120+5) mm Tables, ustensiles et accessoires inclus Note : La fonctionnalité des biens n’a pas été vérifiée. Ils sont vendus dans leur état actuel, sans garantie de fonctionnement. Auction-ID: A7-43861-1

turning diameter over bed: 1420 mmturning diameter over slide rest: 1000 mmturning length: 15000 mmturning dia. in gap: 2050 mmspindle diameter: 160 mmspeed: 1 - 400 U/minfaceplate diameter: mmspindle motor: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 4-jaw face plate- 4 Steady rest- 4-way toolpost- Rapid traverse- tailstock- Taper turning attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 520 mmturning diameter over slide rest: 260 mmturning length: 1600 mmturning diameter in the gap: - mmturning speeds: 14 - 710 U/mincentre height: 260 mmspindle bore: mmtotal power requirement: 11,0 KWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 4,0 x 1,4 x 1,6 mLead screw lathe- 4-jaw chuck 315mm- Multifix tool post size B- Feed in top slide- Steady rest- Machine feet- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de tournage sur le plateau : 280 mm Diamètre de tournage sur repose-coulisse : 170 mm Longueur de tournage : 600 mm Poids de la machine environ : 400 kg Passage de la broche : 26 mm Vitesses : 55-2000 U/min Puissance totale requise : 1,4 kW Dimensions de la machine environ : 1,5 x 0,8x 1,3 m Y compris le support de meulage EMCO SOD Y compris le mandrin EMCO à 4 mâchoirs Y compris les pieds de la machine Y compris les vitesses de changement Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.