sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 102)
O-M LTD. Broyeur vertical CNC COMMANDES CNC FANUC 16T-A, RETROFIT 1994 CAPACITÉ: DIAMÈTRE DE LA TABLE 4000mm DIAMÈTRE DE TOURNAGE MAXIMUM 7000mm HAUTEUR DE TOURNAGE MAXIMALE 2900mm HAUTEUR MAXIMALE SOUS RAIL 3000mm CAPACITÉ DE POIDS DE LA TABLE 45400kg COURSE VERTICALE DE LA RAM, AXE Z 1500mm COURSE HORIZONTALE DE LA RAM, AXE X 2550mm PLAGE DE VITESSES DE TABLE .55-40 RPM VITESSES DE TABLE 16 ÉTAPES PLAGE D’ALIMENTATION TÊTE DE RAM VERTICALE 0.003-.6 IPR TRAVERSÉE RAPIDE, TÊTE HORIZONTALE 49 IPM TRAVERSE RAPIDE, RAIL TRANSVERSAL 12 IPM TRAVERSÉE RAPIDE, COLONNE 21 IPM COUPLE MAXIMAL 58 000 LB/PI ÉQUIPÉ: COMMANDES CNC FANUC 16T-A (RETROFIT 1994) TABLE À FENTE EN T DE 4000 MM AVEC 4 MÂCHOIRES SUPÉRIEURES COLONNE RÉGLABLE OPENSIDE BÉLIER OCTOGONAL VERTICAL SUR RAIL TRANSVERSAL CALOPORTEUR PROTÈGE-PUCES CONVOYEUR DE COPEAUX MAYFRAN MOTEUR PRINCIP ...
Broyeur d’alésage vertical FRORIEP CNC Double colonne RECONSTRUIT ET RÉTROFIT CNC EN 1999 FONCTIONNALITÉS: COMMANDE CNC SIEMENS 840D 2 TÊTES DE RAM VERTICALES CAPACITÉ: DIAMÈTRE DE LA TABLE: 10 000mm DIAMÈTRE DE TOURNAGE AVEC RAMS VERTICAUX: 15 000mm HAUTEUR DE TOURNAGE MAXIMALE: 5000mm RAM COURSE VERTICALE: 2000mm RAM PIVOTANTE +/- 30/15 DEG FORCE DE COUPE MAXIMALE RAIL DROIT HD: 25t CAPACITÉ DE CHARGE DE LA TABLE: 200t PLAGES DE VITESSE DE TABLE, VARIABLE INF: 4 VITESSES DE TABLE : 0,13 À 13 TR/MIN MOTEUR D’ÉLÉVATION DE RAIL TRANSVERSAL: 40.23 HP NOMBRE D’ALIMENTATIONS, VERTICALES ET HORIZ: 30 MOTEUR DE RÉGLAGE CROSS RAIL 86 HP MOTEURS RAPID TRAVERSE: 15,5 HP MOTEUR PRINCIPAL: 250 HP ÉQUIPÉ: SIEMENS 840D CNC CONTROL NOUVEAU 1999 COMMANDES À DOUBLE SUSPENSION 2 RAMS VERTICAUX COMMANDÉS PAR CNC TABLE À FENTE EN T DE 10 000 MM D ...
MORI SEIKI NT6600 CENTRE DE TOURNAGE DE FRAISAGE INTÉGRÉ CNC AVEC FRAISAGE SOUS TENSION BALANCEMENT MAXIMUM SUR LE LIT: 42inch DIAMÈTRE MAXIMUM DE LA PIÈCE: 42inch LONGUEUR MAXIMALE DE LA PIÈCE: 239inch DIAMÈTRE MAXIMUM DE LA BARRE: 6.4inch ALÉSAGE DE LA BROCHE: 7 pouces X AXIS TRAVEL: 41 pouces Y AXIS TRAVEL: 26 pouces Z AXIS TRAVEL: 242 pouces AXE B: +/- 120 DEG. VITESSE DE LA BROCHE PRINCIPALE: 1500 RPM MOTEUR DE BROCHE PRINCIPAL: 40 HP VITESSE DE BROCHE DE FRAISAGE: 8000 RPM MOTEUR DE BROCHE DE FRAISAGE: 40 HP ÉLECTRIQUE: 220V / 3P / 60Hz / 216A OAD (APPROXIMATIF): 490inch X 182inch X 169inch HIGH POIDS (APPROXIMATIF) : 120 560 LB. ÉQUIPÉ: AXE C YAXIS AXE B OUTILLAGE/FRAISAGE SOUS TENSION CHUCK de 20 pouces FS-31iA5 COMMANDE CNC CHANGEUR D’OUTILS AUTOMATIQUE À 140 POSITIONS QUEUE PROGRAMMABLE LIQUIDE DE REFROIDISSEMENT À TRAVERS LA BROCHE (HAUT ...
TOUR DE FILAGE CNC FABRICANT: M +M MODÈLE: HF450TT / 2S NUMÉRO DE SÉRIE : 26-2453-00 ANNÉE : 2000 FABRICANT ET MODÈLE DE CONTRÔLE: Tracktronic HAUTEUR CENTRALE DE L’AXE Z: 419mm DISTANCE ENTRE LES CENTRES: 1200mm ADAPTATEUR D’OUTILLAGE Z-AXIS: DIN 55027 / Taille 15 PUISSANCE D’ENTRAÎNEMENT DE L’AXE Z: 80kW TAUX DE RÉDUCTION ZF DE L’ENTRAÎNEMENT DE L’AXE Z: 1: 4 VITESSE D’ENTRAÎNEMENT DE L’AXE Z: 0-1000 RPM pas moins variable X - COURSE DE DIAPOSITIVE: 500mm X - FORCE DE GLISSEMENT: 100kN X - VITESSE DE GLISSEMENT: 400mm / min Y - COURSE DE DIAPOSITIVE: 275mm Y - FORCE DE GLISSEMENT: 100kN Y - VITESSE DE GLISSEMENT: 400mm / min COURSE DE QUEUE: 600mm FORCE DE SERRAGE DE LA QUEUE: 80kN COURSE DE L’ÉJECTEUR: 450mm LIQUIDE DE REFROIDISSEMENT: oui PUISSANCE 3PHASE / 50-60 Hz / 200 - 500 Volts: 3PH / 60Hz / 480V existant CARACTÉRISTIQUES SP ...
serial number: 1022 2243-03 centre distance: 1500 mm: 560mm weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 820 mmturning diameter over slide rest: 575 mmturning length: 1.500 mmturning diameter in the gap: 1.040 mmcenter height over bed: 400 mmcentre distance: 1.600 mmbed width: 560 mmspindle taper: KK 11 CAMLOCK DIN 55022spindle bore: 128 mmworkpiece weight: 2.800 kg3-jaw-chuck diameter: 400 mmturning speed range: 5,6 – 1120 U/minpower requirement: 18,5 kWtaper in tailstock-quill: MK 6 dia. of quill: 100 mmquill stroke: 240 mmvoltage: 400 Vtotal power requirement: 20,0 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 4,30 x 1,50 x 1,50 mCoolant Tank: 1,80 x 1,10 x 0,20 m- Serial-No.: 1049.2007.07- Powered top support- RÖHM 3-jaw wedge-type chuck- Quick-change tool holder- Quick-action drill chuck, Ø 1–13 mm- Coolant system- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0554 mm: 2000 mm: : 277 mm: 104 mm: 400 mm: 2000 U/min : D1-11 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles:6 spindle passage:22 mm?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU.The complete energy supply of all 6 main spindles was replaced in April 25.No socket for powered tools!
weight of the machine ca.:18 tcentre distance:700 mmmax. swing diameter:200 mmLathe with 4 tools only for 3-cylinder crank shaft
max. workpiece diameter:29 mmmin. workpiece diameter:26 mmworkpiece length:66 mmthe system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mmChanging parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mmTotal length will probably be almost 400 mm possible with a few conversions.Also dependent on tool lengths, machining lengths on the component, etc.Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing the clampi ...
turning diameter:250 mmswing diameter:250 mmturning height:200 mmtotal power requirement:37,7 kWchuck diameter:315 mmspindle speed max.:5500 1/mintravel -x axis:625 mmtravel -y axis:+100/-80 mmtravel -z axis:250 mmworktool system:VDI 30+40 weight of the machine ca.:8 tThe synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm.Typical components are ball cages, ball hubs, gear wheels, sliding sleeves,pump wheels, flanges, synchronizer rings, bearing rings and pivot pins.The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.
number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:8,6 tspindle drive motor:11 kW
turning diameter:200 mmturning height:120 mmweight of the machine ca.:18 tAvailable from 01.08.2024
turning diameter:1000 mmswing diameter:1000 mmMachine type: Vertical latheManufacturer: HessappType: DV 62Serial no.: 14.2308Working range of the spindleLargest diameter 1000 mmLargest swing diameter 1000 mmCross slide travelStroke of the vertical slide 900 mmStroke of the horizontal slide 1810 mmTotal travel 2315 mmTurning spindleSpindle head with centering cone according to DIN 55021 A15Spindle diameter in the front bearing 203 mmMain driveVia a controlled asynchronous motor and gear transmissionwith range switching.Spindle speedsSpeed range I: 5 - 350 rpm.Speed range II: 30 - 1000 rpm.Travel speedX/Z axis: 10 m/min.W1 axis: 8 rpmNo C-Axis
faceplate diameter:800 mmpower requirement:110 kWweight of the machine ca.:37.000 / total 52.000 ttransport measurements machine:5,07 x 2,98 x 3,90 mclamping diameter:800 mm:Ø 800 x 720 mmTool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis
faceplate diameter:1600 mmpower requirement:80 kWweight of the machine ca.:25 tdimensions of the machine ca.:4,4 x 4,62 mmax. workpiece diameter:2000 mmmax. diameter of face turning:1800 mmtool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis
turning diameter:270 -300 mmturning length:710 mmtotal power requirement:43 kWweight of the machine ca.:8,5 tdimensions of the machine ca.:3,16 x 2,15 x 2,15 mThe machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.
turning diameter:220 mmturning length:310 mmtotal power requirement:17 kWweight of the machine ca.:3,3 tdimensions of the machine ca.:2,25 x 1,63 x 1940 mgreates pass round over bed:430 mmbore diameter:45 mmcentre distance:687 mmslide travel radial ( X-axis ):160 mmslide travel axial ( Z-axis ):310 mmspindle turning speed range:0-6.300 U/min
turning diameter:220 mmturning length:700 / 665 mmtotal power requirement:17 kWweight of the machine ca.:2,6 tdimensions of the machine ca.:2,63 x 1,98 x 1,94 mgreates pass round over bed:430 mmPart length max.:510 slide travel radial ( X-axis ):160 mmbore diameter:45 mmTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.
turning diameter:360 mmturning length:520 mmtotal power requirement:20 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3 x 2 x 2 m
turning diameter:360 mmturning length:520 mmtotal power requirement:20 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3 x 2 x 2 m
turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock versionThe machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith live tools:VDI40 Live tooling VDI40with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock versionChip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith automatic loading and unloading system, chip conveyorG300 with "spindle bore clamping capacity 90mm" in tailstock versionThe machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:120 mmturning length:650 mmweight of the machine ca.:11 tdimensions of the machine ca.:5,032 x 3,048 x 2,445 mGildemeister MF Twin 65-II lathe with loading automation.This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
turning diameter:120 mmturning length:650 mmweight of the machine ca.:11 tdimensions of the machine ca.:5,032 x 3,048 x 2,445 mmax. swing diameter:250 mmGildemeister MF Twin 65-II lathe with loading automation.This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
turning diameter:200 mmturning length:600 mmcapacity X-axis:190 mmcapacity Z-axis:555 mmdouble spindle units: spindle distance:800 mmspindle drive:Links (40/100%ED): 18/14 kWspindle turning speed range:31-6300 U/minspindle drive:Rechts (40/100%ED): 18/14 kWspindle turning speed range:31-6300 U/minspeeds of tool:2x12 Werkzeuge: 7/5 KW, 40-4200 U/mindimensions of the machine ca.:5,032 x 3,048 x 2,445 mweight of the machine ca.:6500 KgGildemeister MF Twin 65-II lathe with loading automation.This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
