tours machines d'occasion à vendre (3,110)

max. turning diameter: 540 mmmax. turning length: 1.020 mmbar capacity: 65 mmSpindle speed: 5.000 min -1driven tools turning speeds: 10.000 U/mincontrol: FANUC 18i-TB Dimensions (L x W x H): 4.520 x 2.300 x 2.600 mmmachine weight ab.: 12.000 kgCNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 Sequipped with chip conveyor.Additional equipment:+ counter spindle+ B axisThe machine is in good condition.A machine video from the production plant will be shared on request.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 SThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Réf. -N°: 10374Fabricant: MONFORTS Année de construction: 2000Type de contrôle: Zyklen gesteuertContrôle: MONFORTSContrôleLieu de stockage: HalberstadtPays d’origine: Allemagne

Ref. -No.: 10372Manufacturer: STAMAYear of construction: 2021Type of control: CNCControl: SINUMERIK Siemens 840 D slStorage location: HalberstadtCountry of origin: SwitzerlandTurning Speeds: 4200 RPMX-axis travel: 615 mmY-axis travel: 290 mmZ-axis travel: 500 mmNumber of tools in the chain magazine: 64 Max. Rapid traverse: 65 m / minMax. Feed force: 4000 NAcceleration (X): 7 m/s²Acceleration (Y): 9 m/s²Acceleration (Z): 13 m/s²Further information:- Ball screw- Automation- Workpiece loading/unloading chuck parts with X- / Z- gantry loader- Clamping pressure preselection 15 - 50 bar for both spindles- Buffer station for constant short chip-to-chip times- NCU High Performance NCU 730.3.m- Magnetic gripper

Ref. -No.: 10369Manufacturer: MONFORTSYear of construction: 2005Type of control: CNCControl: MTCK/Euro TurnStorage location: HalberstadtX stroke: 450 mmZ - stroke: 3850 mmCentre Distance: 3970 mmFeed Capacity - Z: 20,7 kNFeed Capacity - X: 10,1 kNRapid Travel Speed X-Axis: 4 m / minRapid Travel Speed Z-Axis: 5 m / minTailstock Quill Diameter: 125 mmTailstock Quill Stroke: 200 mmCircumference diameter over slideway: 830 mmCircumferential diameter over radial slide: 540 mmspindle taper diameter: 140 (Metrisch) mmQuills Morse taper: MK6 Max swing diameter: 900 mm

Ref. -No.: 10367Manufacturer: WEILERYear of construction: 1996Type of control: CNCControl: SiemensStorage location: HalberstadtCountry of origin: GermanyTurning Speeds: 500 RPMMachine length: 7000 mmMachine width: 2300 mmMachine Height: 2600 mmWeight Of The Machine Ca.: 9,25 tSpindle Taper: 6 Mk Travel quill: 300 mmBed width: 800 mmTurning Length: 3000 mmTurning Diameter Over Bed: 900 mmSwing Diameter Over Bed Slide: 530 mmSpindle Bore: 254 mmSpindle power: 45 kWTailstock - Insertione Into The Sleeve: 140 Ø Max. Workpiece Weight: 5000 kgFurther information:Machine can be inspected under power.

Ref. -No.: 10366Manufacturer: MONFORTSYear of construction: 2000Type of control: CNCControl: EURO TURNStorage location: HalberstadtCountry of origin: DeutschlandMachine length: 5000 mmMachine width: 1970 mmMachine Height: 1800 mmX stroke: 370 mmZ - stroke: 2880 mmChuck diameter: 200/250/315 mmCentre Distance: 3040 mmSpindle Head: DIN 55027 - 8x220 Feed Capacity - Z: 18,9 kNFeed Capacity - X: 11,3 kNRapid Travel Speed X-Axis: 5 m / minRapid Travel Speed Z-Axis: 10 m / minCircumferential diameter over radial slide: 350 mmMax swing diameter: 720/630 mmtravel of the cross slide: 375 mmSpindle head max. passage for violent material: 68 mmSpindle head max. passage for bare material: 70 mmTailstock outside diameter of the quill: 110 mmTailstock maximum quill stroke: 210 mmTailstock inner cone: MK6 TypeFurther information:Additional lubricating oil tank approx. 6l

Ref. -No.: 10365Manufacturer: MONFORTSYear of construction: 1997Type of control: CNCControl: MTC KStorage location: HalberstadtCountry of origin: DeutschlandMachine-No.: 178.05 Machine length: 5200 mmMachine width: 2110 mmMachine Height: 1995 mmWeight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) tX stroke: 455 mmZ - stroke: 2850 mmChuck diameter: 315/400/500 mmCentre Distance: 3000 mmSpindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kNFeed Capacity - X: 11,3 kNRapid Travel Speed X-Axis: 6,8 m / minRapid Travel Speed Z-Axis: 4 m / minCircumferential diameter over radial slide: 540 mmMax swing diameter: 830 mmtravel of the cross slide: 450 mmSpindle head max. passage for violent material: 88 mmSpindle head max. passage for bare material: 90 mmTailstock outside diameter of the quill: 125 mmTailstock maximum quill stroke: 200 mmTailstock inner cone: MK6 Typ ...

Ref. -No.: 10364Manufacturer: MAZAKYear of construction: 1997Type of control: CNCControl: MAZATROL T PLUSStorage location: HalberstadtCountry of origin: JapanMachine length: 6365 mmMachine width: 3180 mmMachine Height: 2800 mmWeight Of The Machine Ca.: 7 tBar passage: 64 mmMax rotation diameter: 510 mmTurning Diameter: 400 mmTurning Length: 1539 mmSpindle power: 22-26 kWSpindle Speed Min.: 35 RPMSpindle Speed Max.: 3500 RPMRapid Travel Speed X-Axis: 12 m / minRapid Travel Speed Y-Axis: 10 m / minRapid Travel Speed Z-Axis: 18 m / minMotor power milling spindle: 7,5 kWMax. speed milling head: 15-6000 RPMX-axis travel: 450 mmY-axis travel: +/- 90 mmZ-axis travel: 1539 mmNumber of tools in the chain magazine: 40 (15 + 25) POS Further information:The main spindle was replaced with a new one in Oktober 2019. In the course of this, small spare parts were renewed or reworked.

Ref. -No.: 10362Manufacturer: SCHIESSYear of construction: 2023Type of control: CNCControl: Siemens - Heidenhain - Fanuc (configurable)Storage location: HalberstadtCountry of origin: Germanyfinancing: nach AnfrageSpindle Speed Max.: 3500 RPMPallet diameter: 1600 mmMax. machining diameter: 2000 mmNumber of claw boxes: 4 pcClamping force per claw box: 55 kNNumber of radial T-slots: 8 Max. speed for turning: 140 min-1Max. speed for milling: 5 min-1Max. torque for turning: 27000 NmMax holding power: 36 kNpositioning speed: 3000 mmAdjustment from center to right: 850 mmShift from center to right (head and tool change): 2750 mmAdjustment from center to left: 850 mmMax feed rate: 2000 mm / minMax rapid traverse speed: 20000 mm / minMax. Feed force: 30 kNcross-section: 280 x 240 mmMax. cutting force when turning: 36 kNMax Spindle Torque: 1200 NmPressure: 6 barAir requirement: 20 m³/h

Réf. -N°: 10359Fabricant: BRINKMANNAnnée de construction: 2005Type de contrôle: CNCLieu de stockage: HalberstadtPays d’origine: DeutschlandType de porte-outil: Sauter Werkzeugrevolver Heures de fonctionnement: 45000 heuresInformations complémentaires:Convoyeurà copeaux articulés Nettoyage du liquide de refroidissement avec 2 pompesSystème de refroidissement 1x mandrin de mâchoire sans système d’échappement de brouillard de refroidissement

Réf. -N°: 10319Fabricant: TAKANGType de contrôle: Digitalanzeige ACU-RiteContrôle: KonventionellLieu de stockage: HalberstadtPays d’origine: TaïwanPoids de la machine Ca.: 1,3 tDiamètre de la balançoire au-dessus du lit: 430 mm Largeur du lit: 300 mm Longueur de la pointe: 1500 Hauteur centrale: 215 mm Longueur du lit: 1600 mm

Ref. -No.: 10320Manufacturer: TOSType of control: Digitalanzeige - MitutoyoControl: KonventionellStorage location: HalberstadtCountry of origin: TschechienTip length: 1500 Centre Height: 280 mmCentre Distance: 750,1000,15000,2000 mmSpindle Bore: 56 mmSwing diameter over bed: 500 mmNumber of speed levels: 18 Circumferential diameter over the support: 320 mmCircumferential diameter over the bed recess: 560 mmBed length relieved from headstock: 300 mmUniversal chuck diameter: 250 mmDiameter of the clamping disc: 500 mmFurther information:Universal center lathe

Réf. -N°: 10317Fabricant: NOSOTTIType de contrôle: Digitalanzeige - Mini assistantContrôle: KonventionellLieu de stockage: HalberstadtPays d’origine: ItalieLongueur de la pointe: 3000 Hauteur centrale: 260 mm

Réf. -N°: 10314Fabricant: PINACHOAnnée de construction: 2005Type de contrôle: KonventionellLieu de stockage: HalberstadtPays d’origine: EspagnePlume de voyage: 180 mm Diamètre de tournage: 630 mm Longueur de tournage: 3000 mm Diamètre de tournage sur le lit: Mouvement croisé de 620 mm. (axe X): 365 mm Plume de poupée Diamètre : 72 mm Diamètre de rotation sur glissement transversal : 880 mm

Ref. -No.: 10313Manufacturer: MONFORTSYear of construction: 2001Type of control: CNCControl: EUROTURNStorage location: HalberstadtCountry of origin: DeutschlandMachine-No.: 164 01 Machine length: 6200 mmMachine width: 2110 mmMachine Height: 1995 mmWeight Of The Machine Ca.: 7,7 tX stroke: 450 mmZ - stroke: 3850 mmChuck diameter: 315/400/500 mmTurning Diameter: 630 mmTurning Length: 3000 mmCentre Distance: 3985 mmSpindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kNFeed Capacity - X: 11,3 kNRapid Travel Speed X-Axis: 4 m / minRapid Travel Speed Z-Axis: 5 m / minTailstock Quill Diameter: 125 mmTailstock Quill Stroke: 200 mmSpace requirement: 7500 x 3500 mmCircumferential diameter over radial slide: 540 mm mmspindle taper diameter: 140 mmJaw chuck diameter: 400 mmjaw continuity: 102 mmQuills Morse taper: 6 Max swing diameter: 830 mmtravel of the cross slide: 450 mmSpindle head max. pa ...

Ref. -No.: 10294Manufacturer: SCHNEIDER WERKZEUGMASCHINENYear of construction: 1983Type of control: CNCControl: Siemens Sinumerik 840 DStorage location: HalberstadtCountry of origin: DeutschlandMachine-No.: 27.0175 Weight Of The Machine Ca.: 4 tTurret places: 8 PcsTurning Diameter: 595 mmTurning Length: 3000 mmBezel diameter (inside): 240 - 490 mmFurther information:Tool turret, with 8 holders, with chip conveyor, approx. 300 mm wide,Belt filter system Mayfran, 2 bezels, 1 x for diam. up to 240 mm, 1 x for diam. until about 490 mm

Réf. -N°: 10258Fabricant: SCHAERERType de contrôle: KonventionellLieu de stockage: HalberstadtPays d’origine: AllemagneDoublure: Forkardt F315 BrandLongueur de la machine: 3.800 mm Largeur de la machine: 1.300 mm Hauteur de la machine: 1.500 mm Poids de la machine Ca.: 4 tType de porte-outil: Multifix Typ C Longueur de tournage: 1.800 mm Diamètre de tournage sur le lit: 520 mmDiamètre de rotation sur repose-glissière: 320 mm Alésage de la broche: 62 mm Diamètre de la lunette (intérieur): 270 mm Trou dans le mandrin de la mâchoire: 84 x 120 mm

Réf. -N°: 10257Fabricant: HEIDENREICH & HARBECKAnnée de construction: 1981Type de contrôle: KonventionellLieu de stockage: HalberstadtPays d’origine: DeutschlandMachine-No.: 80-0512-0562 Vitesses de virage: 20-2000 RPMLongueur de la machine: 2.900 mm Largeur de la machine: 1.200 mm Hauteur de la machine: 1.800 mm Poids de la machine Ca.: 3,5 tType de porte-outil: Multifix Typ B Longueur de tournage: 1.000 mmDiamètre de tournage sur le lit: 480 mm Diamètre de rotation sur repose-glissière: 295 mm Diamètre de la lunette (intérieur): 1 x 145, 1 x 255 mm

Réf. -N°: 10229Fabricant: GÖPPINGERAnnée de construction: 1953Type de commande: KonventionellContrôle: N/aLieu de stockage: HalberstadtPays d’origine: DeutschlandLongueur de la machine: 4700 mm Largeur de la machine: 1450 mm Hauteur de la machine: 1300 mm Poids de la machine Ca.: 3,1 tTension d’alimentation: 380 VLongueur de tournage: 3000 mm Diamètre de tournage sur le lit: 530 mmDistance centrale: 3050 mm Diamètre de pivotement sur glissière de lit: 305 mm Alésage de la broche: 58 mm Puissance totale requise: 5,5 kW Circulation dans la manivelle: 720 mm

Ref. -No.: 10154Manufacturer: HEYLIGENSTAEDTYear of construction: 2014Retrofit: 2015Type of control: CNCControl: SINUMERIK 840D solution lineStorage location: HalberstadtCountry of origin: DeutschlandBed width: 2000 mmFeed rate: 1-5000 mm / minTurning Diameter: 2600 mmTurning Length: 10000 mmCentre Distance: 11500 mmFaceplate Diameter: 2000 mmSpindle Speeds: 0,5 - 36 min-1/20 - 140 min-1 RPMMax. Torque: 120 NmMax. Workpiece Weight: 40000 - 70000 kgTotal Power Requirement: 230 kWCross slide shift (X-axis): 640 mmFurther information:

Ref. -No.: 10036Manufacturer: JOHNFORDYear of construction: 2009Type of control: CNCControl: Fanuc Series 18i-TBStorage location: HalberstadtCountry of origin: TaiwanMachine length: 9800 mmMachine width: 3695 mmMachine Height: 5292 mmWeight Of The Machine Ca.: 32,6 tamount of positions: 12 Bar passage: 165 mmSerial no.: TDF9007 Turning Length: 2000 mmTurning Diameter Over Bed: 1550 mmSwing Diameter Over Bed Slide: 1270 mmLongitudinal Travel (Z-Axis): 2000 mmSpindle Head: A2-15 Spindle Diameter In Front Bearing: 240 mmSpindle Bore: 185 mmSpindle power: 37/30 kWCross Travel: 685 mmSpindle Speeds: 1000 RPMRapid Travel Speed X-Axis: 10 m / minRapid Travel Speed Z-Axis: 12 m / minTool changer: 12 Pcs

turning diameter: 330 mmturning length: 140x130 mmcontrol: turning diameter over slide: 140 mmtravel -x axis: 107 mmtravel -z axis: 230 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre de tournage: 200 mm longueur de tournage: 508 mm axe x: 176 mm axe z: 520 mmcontrôle: Fanuc-Series O-TD puissance totale requise: kWpoids de la machine ca.: 3,2 tdimensions de la machine ca.: 2,73x1,98x1,64 m

turning diameter: 750 mmturning length: 1520 mmcontrol: Fanuc 18 iT-B total power requirement: 22,0 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 2000 mmswing diameter over bed slide: 520 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 4745 mm x 1340 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 330 mmturning length: 510 mmcontrol: FANUC 18i - T turning diameter over bed: 600 mmturning diameter over slide: 550 mmx-travel: 250 mmz - travel: 580 mmy-travel: 100 (±50) mmb-axis: 0.001 mmrapid travel x/y/z: 20/7,5/24/ m/minrapid taverse: B- Achse 20 m/minc-axis: 4.500/ 6.000 °spindle passage: 76/ 45 mmspindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/minspindle drive: 15/ 7,5 kWTurret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mmchuck: Subspindel 160 mmtotal power requirement: 50,7 kVAweight of the machine ca.: 4,9 tdimensions of the machine ca.: 3.118 x 1.705 x 2.076 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mmturning diameter over slide rest: 1070 mmturning length: 7000 mmturning speeds: 2,24-450 U/minControl: faceplate: 1400 mmspindle passage: 160 mmsteady: 400 mmdrive capacity - workpiece: 63 kWTail stock:: elektr. diameter of quill: 200 mmbed width: 950 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tour CNC très bien conservé WEISSER Heilbronn, type Gigant. De l’opération de précision, seulement l’usinage ultra-fin. Détails Tapez Gigant N° de machine 27-0166 Mandrin d’art de fourche auto-serrant hydrauliquement avec vérin de serrage électrique 4x revolver Sauter, taille 400 mm2 Siemens SINUMERIK 840D entièrement fonctionnel Mise en service 04/2003 Course X 725 mm (trait), Z 1 480 mm Entraînement de la broche principale DC 45 kW (puissance nominale) Vitesses en 3 étages jusqu’à max. 1 120 tr/min Un ensemble de mâchoires de base à l’intérieur / à l’extérieur sans Lynette (mais peut être fourni pour la personnalisation) y compris la documentation

turning diameter over bed: 520 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chuckMultifix tool holder devicetail stockTechnische Daten / technical details:Drehlänge / turning lenght 1000 mmDreh-Ø über Bett / turning Ø over bed 520 mmDreh-Ø über Schlitten / turning Ø over sledge 300 mmDrehzahlbereich / spindle speed 30-1600 UpM /rpmGewicht der Maschine ca. / weight 2500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Un tour de précision Weiler Primus avec dispositif de fraisage est offert et de nombreux accessoires en très bon état. Une grande partie des accessoires sont inutilisés. Spécifications: Hauteur centrale 120 mm Distance entre les centres 420 mm Diamètre de balançoire au-dessus du lit 245 mm Alésage de broche 23 mm Vitesses de broche 18 Plage de vitesse 60 - 3000 tr/min Puissance du moteur 1,1 / 1,5 kW Frein à broche moteur Protection d’alimentation de grande taille - hotte de protection contre les copeaux Dimensions extérieures env. Longueur 120cm Profondeur 750mm Hauteur 170cm Poids env. 500 kg Accessoires: Multifix A - 5 supports en acier Mandrin à 3 mâchoires 125 mm Mandrin à 4 mâchoires 125 mm Diverses mâchoires interchangeables Thumper CGN-1969 Mandrin de tour excentrique 80mm (inutilisé) Plaque frontale Porteur pour cœur rotatif Lunett ...