tours machines d'occasion à vendre (3,106)

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW

Contrôle Fanuc 18i-TB Diamètre rotatif. [mm] 130 Longueur de tournage [mm] 110 Généralités: Année de construction 2008 Contrôle Fanuc 18i-TB Diamètre de tournage 130 mm Longueur de tournage 110 mm Diamètre circonférentiel 200 mm Hauteur de la pièce max. 110 mm Fuseau: Technologie de la broche du moteur Vitesse 7 500 tr/min Puissance 24 kW Couple 158 Nm Axe C 0,001 Vérins de serrage Vérins de serrage complets Porte-outils (X/Z) : Technologie Tourelle étoile Nombre de stations 12 pièces Porte-outil VDI 40 Entraînement de l’outil 6 000 tr/min, 40 Nm Axe X 400 mm Axe Z 200 mm Equipement / Accessoires : Systèmes de mesure de déplacement direct (balances en verre) Convoyeur de copeaux d’élimination des copeaux Pompe haute pression d’alimentation en liquide de refroidissement Automatisation du stockage des pièces en circulation Extr ...

Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range

turning speeds: 6000 U/minx-axis: 550 mmz-axis: 200 mmrapid traverse: 30/20 m/minfeed: 11 m/mincontrol: Siemens 840 C total power requirement: 35 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: m- speeds: [1/min.] : 6.000- torque [Nm]: 480- swing diam.: 290 mm- power: [kW] 34- chuck diam. 200 mm- turret: 12-fach, VDI 40, Sauter- driven tools 7,8 KW,- x -travel: 550 mm- z- travel: 200 mm- rapid travel: (X/Z) [m/min] 30 / 20- feeds: (X/Z) [m/min.] 11 KN- connected load: [KW] 36 kW- machineweight: [kg] 6.500- chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm- Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain- parts conveyor for feeding parts into the machine- Specification:- Overhauled in 2007 for approx. €50,000, complete headstock replaced.- Feed unit replacedThe data for this ad was created with ModulMWS - the software solution of ...

Weibert TU 1503V Tour Micro tour Hauteur de la pointe 75mm Largeur de la pointe 265mm Diamètre de tournage 150mm Vitesse de la broche 120 -3000 min/1 électronique Alésage de la broche 11 mm Moteur d’entraînement 230V 450W 50HZ Cône de broche MK1 Mandrin à trois mors 80mm Support 2 plis en acier 12mm G&STÜ-3420260

: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hauteur du centre : 102 mmEntraxe : 450 mmAlésage de la broche : 25 mmVitesse de la broche :: 220 - 2600 Poids de la machine env. : tDimensions de la machine env. : mL’exhaustivitédes accessoires n’a pas été vérifiée Les armoires ne sont pas incluses dans la livraison

swing dia.: 600 mmturning diameter: 310 mmturning diameter over slide: 355 mmspindle bore: 53 mmbar capacity: 45 mmturning speed range: 6000 U/minturning length: 388 mmtravel -z axis: 400 mmtravel -x axis: 220 mmturret (x-stations): 12 control: SIEMENS 828D (Touch) c-axis: 0,001° 0total power requirement: 20 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: LTH 3,7 x 2,0 x 2,0 mIncludes preparation for automation (loading robot)Year of manufacture: 11/2017, delivery: 2018- Automatic door- 12-station tool turret, driven at 5,000 rpm- Workpiece catcher- RENISHAW touch probe, automatically retractable- Tailstock- Chip conveyor- Coolant pumpAccessories:Including collet chuckIncluding 2 x driven tool holders (radial + axial)Including 9 x fixed tool holdersIncluding USB & LAN interfaceIncluding manualsThe data for this ad was created with ModulMWS - the software solution of Lo ...

turning diameter: 700 mmturning length: 1250 mmcontrol: TX8_i total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6,0 x 2,5 x 2,2 mCNC control TX8_i9 CNC axes (X1, X2, Z1, Z2, Y1, B1, B2, C1, C2)Software functions:Tool life monitoring,Polyform, 3D-Helical IP, synchronous threads without L compensation,WOP Traub Win_Flex IPS incl. Mouse,MAIN SPINDLE (direct drive, adjustable hollow shaft motor)Spindle connection A-11 > DIN 55026/ 55021Alignment and switching deviceHollow clamping cylinder > spindle passage max. 102 mm speed max. 3,000 rpmFront bearing dm170 mmDrive power 100/40% ED 53 / 68 kW, torque 675 / 900 NmC-axis resolution 0.001 °Spindle locking for extreme roughing work 2.5 °Counter spindle (direct drive, adjustable hollow shaft motor)Spindle connection A-11 > DIN 55026/ 55021Alignment and switching deviceFull clamping cylinder SINS-140 > Sp ...

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mmturning diameter over slide rest: 1000 mmturning length: 11000 mmtotal power requirement: kWweight of the machine ca.: 49 tdimensions of the machine ca.: mCenter height 720 mmCenter distance 11000 mmTurning diameter over bed 1250 mmTurning diameter over slide 1000 mmWorkpiece weight max 12 toSpeed 3-315 rpm - steplessMotor power 55 kW (DC)Equipment1 position indicator HEIDENHAIN | Type ND 780 for 1 axis1 four-jaw faceplate Ø 1000 mm1 fixed steady rest1 ring steady rest with four-jaw faceplate Ø 920 mm1 Autom. 4-pos. tool holder1 Chip conveyor1 Machine lamp1 Coolant device Operating key | operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 0 mmturning diameter over slide rest: 900 mmturning length: 1.000 mmtotal power requirement: 25 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mHeight of centres 550 mmMax. turning Æ 1200 mmMax. turning Æ over slides, approx. 900 mmMax. turning length, approx. 1000 mmSpindle bore, approx. 90 mm24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/minTotal load, approx. 25 kW - 380 V - 50 HzWeight, approx. 8000 kgAccessories/specialitiesTwo separate slides, each equipped with 2-coordinate copyingequipment, program controlled by plugboard, strengthened bearingsand spindle, hardened an ...

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,6 x 0,65 mBenchtop lathe 3-axis LCD digital display system fully assembled.Longitudinal feed.3-jaw chuck 125 mm.4-jaw chuck 125 mm.Clamping plate.4-way steel holder.Clock for thread cutting.Drip trayHardened bed tracks.Emergency stop switch.Forage protectionSet of wheels.Appropriate tools.Base cabinet is optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de tournage : 250 mmLongueur de tournage : 450 mmCommande : TX8D Alésage : 80 mmVitesse de la broche : 3150 U/min.Tour CNC avec alimentation de barre et 3 tourellesTrès grand alésage de broche, avec dispositifde chargement de barre Veuillez demander plus de détails.

turning diameter: 250 mmturning length: 400 mmcontrol: C 200 / 8 total power requirement: 60 kWweight of the machine ca.: 8,5 tSwing Ø above bed, max. 300 mmMax. turning Ø for chucking work, approx. 250 mmTravel of Slides:Turret 1, X / Z travel 163 / 550 mmTurret 2, X / Z / Y travel 140 / 250 / 260 mmSpindle bore, approx. 65 mmTool holder bore 30 mmSpindle speeds 25 - 5,000 rpmFeed range 0 - 15,000 rpmSpindle drive 0.5 - 40 kWTotal electrical load 60 kW - 380 V - 50 HzWeight, approx. 8,500 kgAccessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. Spindle indexing and pos ...

turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 20 mmtailstock quill taper MT: 2 tailstock quill stroke: 60 mmmetric threading: 0,4 - 3,0 mmthread - inch: 10 - 44 TPIthread - module: 0,2 - 12,5 mmconnected load frequency: 230 Vtotal power requirement: 1,0 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,09 x 0,59 x 0,45 mEquipped with- 20 mm spindle passage- adjustable guideways- Powerful 1.0 kW motor- continuously variable speedScope of delivery:- 3-jaw chuck 100 mm,- 4-jaw faceplate chuck 125mm- standing and rotating bezel- Splash guard- Feed protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 25-90 mmthreading length: 3000 mmthread pitch: 2-16 mmtotal power requirement: 25 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mmturning length: 100 mmcontrol: SIEMENS 840 D total power requirement: 35 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mE M A G (Germany)Vertical CNC Controlled Hard Turning and Grinding machinewith tool turret and workpiece handling SystemModel VSC 250 DS Year 2004 # M7 28.69324_______________________________________________________Turning Ø, max. 250 mmTurning length internal / external 100 mmWorkpiece length min./max. 29 – 100 mm6-positon tool turret Ø / swing-Ø 480/790 mmWorkpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mmFeed rate / Quick feed X/Z 45/30 m/min.Feed force X/Z  ...

turning diameter: 400 mmturning length: 915 mmcontrol: NUM Type 1062 T total power requirement: 12,5 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 710 mmcontrol: SIEMENS SINUMERIC 840 total power requirement: 40 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mI N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstockand INDEX CNC Control C 200 – 4 (SIEMENS)Model G 300 Year 1995 S/N 5000 65_____________________________________________________________Turning - Ø, with chuck, max. 300 mmSpindle bore 90 mmMax. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mmTurret head slide cross movement (Z-Axis) max. 140 mmTurret with 12 tool holder positions DIN 30 mmFeed range of turret slide /  ...

turning diameter: 150 mmturning length: 500 mmcontrol: total power requirement: 4 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 400 mmcontrol: SIEMENS SINUMERIC 840 C total power requirement: 40 kWweight of the machine ca.: 6.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 125 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 1,25 x 0,6 x 0,6 mSpeed in 6 levels 125 - 2000rpm.3-jaw chuck 125 mm.4-jaw chuck 125 mm. (Independent)Fixed bezel.Revolving bezel.4-fold steel holder.chip tray.back panel.spindle protection.Hardened bed rails.Longitudinal feed with left / right switching.Set of change gears.Associated Tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: 320 mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,75 x 1,7 mSINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 250mmbezel fixedQuick-change steel holder with 4 pcs. steel holdermachine lightChip tray, chip protection wallHardened and ground bed trackslining protectionmachine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diamètre de tournage au-dessus du lit : 230 mmDiamètre de tournage au-dessus du support coulissant : 100 mmLongueur de tournage : 500 mmDiamètre de tournage dans l’espace : mmVitesses de tournage : 160 - 5000 U/minHauteur du centre : 115 mmAlésage de la broche : mmPuissance totale requise : kWPoids de la machine env. : tDimensions de la machine env. : 1,5 x 0,8 x 1,6 mTour mécanique- Mandrin à pince de serrage- Support en acier Multifix- Accessoires voir photos

Nous vendons un centre de tournage Haas ST-20 pour le compte d’un client. La machine a été installée et n’a jamais été utilisée de manière productive., - Options de commande, - pack d’options, - débit de liquide de refroidissement haute pression, - pack d’accessoires

Diamètre de tournage : 60 mmLongueur de tournage : 200 mmNombre de glissières : Puissance totale requise : 20 kWPoids de la machine env. : tDimensions de la machine env. : m