tours machines d'occasion à vendre (3,083)

Biglia B750 YSYear of manuf. : 2015 Control : Fanuc 32i-B5 Turning diam. : 552 mmTurning length : 765 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:3.0 00 rpmPower (max.):38 kWTorque (max.):1.014 NmBar capacity:100 mmWorkpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix BI-SP08F100Subspindle:Technology:MotorspindleSpeed:4.500 rpmPower (max.):40 kWTorque (max.):286 NmWorkpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix 65Movement in B:895 mmRapid travers in B:30 m/minToolcarrier (X/Y/Z):Technology:Turret with 16 stationsTaper:BMT65Tooldive:10.000 rpm, 17,5 kW, 56 NmMovement in X/Y/Z:305/140/860 mmRapid travers in X/Y/Z:18/18/30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal coolant pump with Filter and Highpressure, 20barToolmeasurement:Automatic Measuringarm, Marposs TT30Rawmaterialfeed:Barloader, Breu ...

Biglia B1200 YLYear of manuf. : 2010 Control : Fanuc 31i Turning diam. : 500 mmTurning length : 1200 mm____________Description:Mainspindle:Technology:Belt-driven spindleSpeed:2.800 rpmPower (max.):26 kWTorque (max.):1.030 NmBarcapacity (max.):94 mmWorkpiececlamping:3-Jaw chuck, SMW Autoblok 250BBToolcarrier (X/Y/Z):Technology:Turret with 12 stationsTaper:BMT65Tooldrive:4.000 rpm, 3,7 kW, 47 NmMovement in X/Y/Z:220/110/1.3300 mmRapid travers in X/Y/Z:20/6/24 m/minTailstock:Technology:Towed Tailstock with hydraulic SleeveStroke:150 mmQuill-ø:115 mmCone:MK5Equipment/Accessory:Chipmanagement:ChipconveyorCoolingmanage ment:Internal cooling pump with Filter and High-pressure, 20 barToolmeasurement:Measuring arm, Renishaw RP3Shaftprocessing:Steadyrest, Morari Clamping-ø0-250 mmFinished part removal:Interface Partscatcher preparedFurther Accessory:Misc. used clamping jaws and toolhol ...

Biglia B658 YBYear of manuf. : 2005 Control : Fanuc 18i-TB Turning diam. : 410 mmTurning length : 650 mm____________Description:Mainspindle:Technology:Beltdriven spindleSpeed:3.000 rpmPower (max.):30 kWWorkpiecemeasurement:3-Jaw chuck, SMW Autoblok HFKS-2G-255-72-3Toolcarrier (X/Y/Z):Technology:Turret with 12 StationsTaper:BMT 65Tooldrive:4.000 rpm, 3,7 kW, 47 NmMovemement in X/Y/Z:255/110/670 mmRapid travers in X/Y/Z:20/6/24 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal coolant pump with Filter and High-pressure, 10 barShaftprocessing:Programmable TailstockRawmaterialfeed:Interface Barloader preparedOilmistseparation:Interface mechanical preparedToolholder:Misc. used static and driven ToolholderFurther Equipment:Rinsing pistol

SMEC NS 2000 MYear of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mmTurning length : 243 mm____________Description:Work areamax. turning diameter:288mmmax. machining length:243mmX-axis:175mmZ-axis:350mmMain spindleChuck diameter:210mmMax. bar diameter:67mmSpindle bore diameter:76mmDrive power:10.5/20 kWmax. torque:213 NMmax. speed:4,500 rpmTailstockQuill diameter:65mmQuill stroke:80mmAxial force:4,312 NCenter point adapter:MT4Tool turretNumber of tool stations:12Tool holder:BMT45Powered tools:YesMax. speed:5,000 rpm

Biglia SMART 2-SYear of manuf. : 2018 Control : Fanuc 31i-B5 Turning diam. : 500 mmTurning length : 1280 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:3.0 00 rpmPower (max.):38 kWTorque (max.):1.014 NmClamping cylinder:Hollow clamping cylinderBar capacity:94 mmWorkpiececlampig:3-Jawchuck, SMW Autoblok 250BBSubspindle:Technology:MotorspindleSpeed:4.000 rpmPower (max.):40 kWTorque (max.):286 NmClamping cylinder:Partially hollow clamping cylinderWorkpiececlamping:3-Jawchuck, SMW Autoblok HFK-N-210-52-3Movement in W:1.130 mmToolcarrier (X/Y/Z/B):Technology:Travelling column with millingspindleSpeed:10.000 rpmPower (max.):20 kWTorque (max.):110 NmTaper:HSK-A63Swivelrange in B:+/- 105°In general:Toolmagazine:Chainmagazine, 40 StationsMovement in X/Y/Z:515/210/1.360 mmRapid travers in X/Y/Z:18/18/30 m/minEquipment/Accessory:Positionsensor:Direct scales in all AxesC ...

This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.

This SCHÜBEL MT 630 CNC was manufactured in 1999. It is a horizontal turning machine featuring a point width of 2,000 mm, a circulation diameter of 630 mm over the bed, and 290 mm over the cross slide. The speed range is 8 - 3,000 rpm with a drive power of 28 kW. Contact us for more information about this machine.

Hauteur de la pointe : 150 mm Largeur centrale : 760 mm Pivot Ø sur la glissière de plateau/support : 300/165 mm Axe de la broche : 32 mm Porte-broche, affiné court selon la norme DIN 55027 : Gr. 5 Queue de queue de la crosse : MK 3 12 vitesses de broche : 85 - 2000 tr/min 48 alimentations : 0,006 - 1,77 mm 48 pas de filetage métriques : 0,1 - 28 mm Filetage de 58 pouces : 75 - 2,5 gg/" 19 threads de modules : 0.1 - 1.75 module Filetage diamétrique de 19 : 70 - 4 DP Électr. Transmission : 220/380 V, 1400 tr/min, 2,2 kW Poids : 800 kg Espace nécessaire : 1800 x 770 x 1300 mm

Hauteur de la pointe : 125 mm Largeur centrale : 800 mm Gr. tournage Ø sur le plateau/guide de chariot : 280/245 mm Porte-broche, filetage selon la norme DIN 800 Alésage de la broche : 24 mm Vitesses de broche ajustables à l’infini : 26 - 2000 tr/min 36 avances longitudinales : 0,019 - 0,528 mm Pas de filetage métrique : 0,25 - 6 mm Filetage de 44 pouces : 4 - 112 gg/" Électr. Connexion : 380 V, 0,7/1,4 kW Besoins en espace : Poids approximatif : 500 kg

Centre de tournage et fraisage CNC Okuma LT 2000 EX -MY 2 pièces Contrôle : OSP-P300L Année de fabrication : 2013 Diamètre de rotation au-dessus du plateau : 400 mm Espacement central : 960 mm Diamètre de tournage : 210 mm Vitesse : 50 – 6 000 tr/min Vitesse sous-broche 50 – 6 000 tr/min Voyages : Axe W 730 mm Axe X 205 mm Axe C : 360 degrés (0,001) 2 tourelles à outils de 16 places chacune (toutes les places sont motorisées) Équipement : - Convoyeurs à copeaux - Système de filtration à courroie en papier avec pompe haute pression - Kitagawa à deux mands à 3 mâchoires - Chargeur à portique OGL avec une capacité de charge d’environ 5 kg - Empilement de magasins 20 places - Toucher - Sonde tactile Renishaw - Système d’extraction - Divers accessoires

Professional industrial machine (400Volt)3-axis digital display3-jaw chuck 180 mm.4-jaw chuck 200 mm.Face plate 280mmsteadyrest steady rest4-fold steel holder.Halogen machine lightMachine lightFoot brakeRemovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemChuck protectionMachine toolsTurning diameter over bed 360 mmTurning diameter over support 220 mmTurning length 1000 mmTurning diameter in offset 380 mmSpeed 70 - 2000rpm Center height 180 mmSpindle bore 50 mmTailstock quill mount MK 3 MKConnection voltage 230 VTotal power requirement 1.8 kWMachine weight approx. 0.65 tSpace requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5)

Table lathe with base cabinet2-axis LCD digital display system.Longitudinal feed. 3-jaw chuck 125 mm.4-jaw chuck 125 mm.4-way steel holder. Drip trayHardened bed sheets.Emergency stop. Lining protectionset wheels.Suitable tools. Turning diameter over bed 250 mmTurning diameter over support 140 mmTurning length 550 mmSpeed 50 - 2000 rpmCenter height 125 mmSpindle bore 26 mmTailstock quill holder MK 2 MKTailstock quill stroke 65 mmConnection voltage 230 VTotal power requirement 1.1 kWMachine weight approx. 0.15 tDimensions approx. 1.3 x 0.6 x 1.3 m Condition: never used / new (5)

Circumferential diameter over bed : 640mm ; Turnings: approx. 2000mm ; Rotary diameter over support: 380mm ; Speed of main spindle range: 9-1800 rpm; see photos for more details

Colchester Mastiff 1400 Type B Lathe Multifix Turning Length: 1500mm Spindle Passage: 100mm Turning Height: 300mm

Lathes with:- 4-fold steel holder- 3-jaw chuck 315mm- Centering tipTurning diameter over bed 500 mmTurning diameter over support 320 mmTurning length2100 mm Center height 250 mmSpindle bore 60 mmSpindle speeds 11 - 2000 rpmTotal power requirement 7.0 kWMachine weight approx. 2.9 tSpace requirement approx. 4.3 x 1.2 x 1.3 mm

number of spindles:8 spindle passage:67 mmCam controlled multi spindle automatic lathe, used8 main spindlespick up in pos. 8threading attachmentCNC compound slide in pos. 5, also 2. speed in pos. 2Hydraulic spindle brake in pos. 4Incl. length measurement, incl. Brankamp cutting force monitoringtooling: could be different like picturesPlease, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Max. turning diameter over bed: 400 mm, max. turning length of workpieces: 1500mm, machine no.: 081034, type C6240C, more details see photos of the nameplates, accessories: turning steels, center punches, multifix clamping jaws, more details see photos

Article: Vertical turning and grinding centreManufacturer: EMAGType: VSC 250 DSYob: 2008Control: SIEMENS 840DGrinding spindle speed: 30,000 rpmRotation spindle speed: 3,000 rpmTool places turret: 12Cooler for spindle and machine bed coolingCooling lubricant - lifting station (no independent cooling lubricant supply)Chip conveyorParts handling Air through the spindleTwo clamping circuits through the spindle (air and oil)Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mmArticle: multi spindle automatic latheManufacturer: SchütteType: AF51Yob: 1987eight main spindlesmax. bar diameter D=51mmcontrol SIEMENS SIMATIC S5pick up in pos. 7, for rear machiningthread cutting driveindependent feed in positions 2/3electronical trip dog control ?Balluff?clear text display Wöhrlecoolant pumpmagnetic cartridge filteroil runningincl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type)Painting in light blue and light greyThe configuration of tooling will be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2016full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,3 x Y-axis,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot, manufacturer HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2019full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot make HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Equipped with- 27 mm spindle passage- adjustable guideways- Powerful motor with 0.75 kW- High resolution of the axis spindles for exact positioning- Attention without digital displayScope of delivery:3-jaw chuck 100 mm, interchangeable wheel set, splash guard.Turning diameter over bed 250 mmTurning diameter over support 130 mmTurning length 700 mmSpeed 115 - 1620 rpmTip height 125 mmSpindle bore 27 mmTailstock quill holder MK 2 Tailstock quill stroke 40 mmMetric threads 0.2 - 3.5 mmThread - inch 8 - 56 inch.Thread module 0.2 - 12.5 mmSwivel range +/- upper slide 45 °Connection voltage 400 VTotal power requirement 0.75 kWMachine weight approx. 0.15 tSpace requirement approx. 1.41 x 0.61 x 0.41 m Condition: never used / new (5)

number of spindles:6 spindle passage:51 mmSchutte SF51 DNT, yob. 1987, our ID #61868Article: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: SF51 DNTYob: 1987Six-spindle automatic lathe with 6 main spindlesmax. nominal diameter D=51mmelectronic cam control Balluffgripper in position 6 for backworking, sorting chuteindependent longitudinal feed layer 5screw chip conveyorTapping couplingsInterface for: Bar feeder IEMCA PRABar feeder IEMCA PRA40/33/FScope of delivery without the blue chip conveyorThe tooling will differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Programme-controlled automatic latheManufacturer: TraubType: TF60 / 140Yob: 1978Bar automatPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic latheManufacturer: SchütteType: AF32 S DNTYob: 1994Eight-spindle automatic lathe with 8 main spindlesmax. nominal diameter D=32mmcontrol: Siemens SIMATIC S7electronic cam control Balluffgripper in position 8 for backworkingCNC cross slide position 6CNC cross slide position 7Workpiece beltCoolant cooling SchimpkeChip conveyor with magnetic separatorTapping couplingsThe tooling shown may differ from the scope of delivery!Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mmArticle: cam-controlled multi-spindle automatic lathe Manufacturer: SchütteType: AF32 DntYob: 1993eight-spindle automatic latheeight main spindlesfor bars up to D=32mmModernized control: Siemens SinumerikMotors: renewed modern motors suitable for modernized control systemElectronic trip dog control: BalluffCNC cross slide position 5 crossCNC cross slide position 6 crossPreparation for gripper in position 8 (gripper optional)Independent feedsThread cutting couplingsintegrated bar loader: Pietro CUCCHI; type: rack type magazineThe scope of delivery regarding the tooling equipment could be different like pictures.

turning diameter:38 mmArticle: CNC latheManufacturer: HanwhaType: STL38HYear of construction: 2013Control: Siemens 840SL for 8 axesMain spindle:max. turning diameter: 38mm; spindle bore max. 42mm, n max. 6,500 rpmPower max. 23 kW; C-axis with 0.001 degree; stroke Z1 320mm; synchronised guide bush unit; guide bush type JBS or SL38; type collet 173E / F48Counter spindle:max. pick-up diameter: 38mm, n max. 6,500 rpmPower max. 23 kW; C-axis with 0.001 degree; stroke Z2 320mm; type collet 171E / F42Tool turret:n max. 6,000 rpmPower max. 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120Bar feeder FMB Turbo 5-55High-pressure station SFB-301 eco 150barPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

spindle passage:25 mmArticle: CNC sliding headstock automatic latheManufacturer: TornosType: Deco 2000/20Year of construction: 2001Control: Fanucspindle diameter: D25 mmmax. speed: 7000 rpmcomb: 2 (X,Z,Y-axis)Front attachment: 1 (X,Z,S-axis)Loading magazine: Tornos Robobar SSFChip conveyor: Hinged belt conveyorother: various accessories such as polygonal impact device, HF spindlePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:9 spindle passage:46 mmArticle: CNC-controlled multi-spindle automatic latheManufacturer: SchütteType: SC9-46Yob: 2016Six-spindle automatic lathe with 6 main spindles with max. nominal throughput D=46mm and 3 counter spindlesMain spindles: 6 motor spindles D46mm, 5. 000 rpm, 35 Nm to 80 NmCross slide units, transverse: 6 units, in positions I to VI,Slide units, longitudinal: 5 units, in positions I to V, Slide units, longitudinal: 5 units, in positions I to V,Counter spindles: 3 units, one each in positions VI, VIII and IX, 7. 500 rpmCross slide units, transverse: 2 units, in positions VIII and IX,Control:Siemens SINUMERIK 840SL with double NCUSoftware: Schütte SICS, Sinomerik Operate 4.5, Safety Integreted,Spindle coupling package ?CP-Expert?, for up to 8 spindle couplings (maximum expansion)Synchronous action package ?Level? 2, incl. cross-mode actions/ASUP (maximu ...

Professional lathe3-jaw chuck4-jaw chuck FacewasherFixedsteady rest Rotatingquick-change steel holder with 4 cassettesHalogen machine lightChip pan, chip protection wallHardened and ground bed sheetsComplete coolant systemChuck protectionMachine toolsTurning diameter over bed 320 mmTurning diameter over support 200 mmTurning length 900 mmSpeed 75 - 2000 rpmCenter height 160 mmSpindle bore 50 mmtailstock quill holder MK 3Connection voltage 230 VTotal power requirement 1.5 kWMachine weight approx. 0.29 tDimensions approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5)