sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 102)
TOUR DE FILAGE CNC FABRICANT: M +M MODÈLE: HF450TT / 2S NUMÉRO DE SÉRIE : 26-2453-00 ANNÉE : 2000 FABRICANT ET MODÈLE DE CONTRÔLE: Tracktronic HAUTEUR CENTRALE DE L’AXE Z: 419mm DISTANCE ENTRE LES CENTRES: 1200mm ADAPTATEUR D’OUTILLAGE Z-AXIS: DIN 55027 / Taille 15 PUISSANCE D’ENTRAÎNEMENT DE L’AXE Z: 80kW TAUX DE RÉDUCTION ZF DE L’ENTRAÎNEMENT DE L’AXE Z: 1: 4 VITESSE D’ENTRAÎNEMENT DE L’AXE Z: 0-1000 RPM pas moins variable X - COURSE DE DIAPOSITIVE: 500mm X - FORCE DE GLISSEMENT: 100kN X - VITESSE DE GLISSEMENT: 400mm / min Y - COURSE DE DIAPOSITIVE: 275mm Y - FORCE DE GLISSEMENT: 100kN Y - VITESSE DE GLISSEMENT: 400mm / min COURSE DE QUEUE: 600mm FORCE DE SERRAGE DE LA QUEUE: 80kN COURSE DE L’ÉJECTEUR: 450mm LIQUIDE DE REFROIDISSEMENT: oui PUISSANCE 3PHASE / 50-60 Hz / 200 - 500 Volts: 3PH / 60Hz / 480V existant CARACTÉRISTIQUES SP ...
faceplate diameter:1600 mmpower requirement:80 kWweight of the machine ca.:25 tdimensions of the machine ca.:4,4 x 4,62 mmax. workpiece diameter:2000 mmmax. diameter of face turning:1800 mmtool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis
turning diameter:270 -300 mmturning length:710 mmtotal power requirement:43 kWweight of the machine ca.:8,5 tdimensions of the machine ca.:3,16 x 2,15 x 2,15 mThe machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.
turning diameter:220 mmturning length:310 mmtotal power requirement:17 kWweight of the machine ca.:3,3 tdimensions of the machine ca.:2,25 x 1,63 x 1940 mgreates pass round over bed:430 mmbore diameter:45 mmcentre distance:687 mmslide travel radial ( X-axis ):160 mmslide travel axial ( Z-axis ):310 mmspindle turning speed range:0-6.300 U/min
turning diameter:220 mmturning length:700 / 665 mmtotal power requirement:17 kWweight of the machine ca.:2,6 tdimensions of the machine ca.:2,63 x 1,98 x 1,94 mgreates pass round over bed:430 mmPart length max.:510 slide travel radial ( X-axis ):160 mmbore diameter:45 mmTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.
turning diameter:360 mmturning length:520 mmtotal power requirement:20 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3 x 2 x 2 m
turning diameter:360 mmturning length:520 mmtotal power requirement:20 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3 x 2 x 2 m
Tour universel VDF Boehninger 640 Type : Tour universel Fabricant : VDF Type : BOEHRINGER 640 Longueur de tournage : 1000 mm Ø de rotation : 640 mm Alésage de la broche Ø : 385 mm Poids de la machine : 3500 kg Dimensions (L x Wide x H) : environ 3650 x 1100 x 1300 mm Distance entre les points : 1500 mm Fonctionnalité non testée Cet article est livré chargé sur camion. Les coûts de démontage et de chargement sont spécifiés comme des coûts supplémentaires. Auction-ID: A1-51509-16
Petit tour automatique/came avec zone de travail fermée, barre/zone d’alimentation et unité motorisée. Machine d’occasion avec usure visible ; adaptée à la réparation, aux pièces ou à l’atelier. Fabricant/modèle et spécifications complètes à confirmer. Auction-ID: A1-51509-39
turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock versionThe machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith live tools:VDI40 Live tooling VDI40with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock versionChip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith automatic loading and unloading system, chip conveyorG300 with "spindle bore clamping capacity 90mm" in tailstock versionThe machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.
serial number: 1022 2243-03 centre distance: 1500 mm: 560mm weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter:120 mmturning length:650 mmweight of the machine ca.:11 tdimensions of the machine ca.:5,032 x 3,048 x 2,445 mGildemeister MF Twin 65-II lathe with loading automation.This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
turning diameter:120 mmturning length:650 mmweight of the machine ca.:11 tdimensions of the machine ca.:5,032 x 3,048 x 2,445 mmax. swing diameter:250 mmGildemeister MF Twin 65-II lathe with loading automation.This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
turning diameter over bed: 820 mmturning diameter over slide rest: 575 mmturning length: 1.500 mmturning diameter in the gap: 1.040 mmcenter height over bed: 400 mmcentre distance: 1.600 mmbed width: 560 mmspindle taper: KK 11 CAMLOCK DIN 55022spindle bore: 128 mmworkpiece weight: 2.800 kg3-jaw-chuck diameter: 400 mmturning speed range: 5,6 – 1120 U/minpower requirement: 18,5 kWtaper in tailstock-quill: MK 6 dia. of quill: 100 mmquill stroke: 240 mmvoltage: 400 Vtotal power requirement: 20,0 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 4,30 x 1,50 x 1,50 mCoolant Tank: 1,80 x 1,10 x 0,20 m- Serial-No.: 1049.2007.07- Powered top support- RÖHM 3-jaw wedge-type chuck- Quick-change tool holder- Quick-action drill chuck, Ø 1–13 mm- Coolant system- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter:200 mmturning length:600 mmcapacity X-axis:190 mmcapacity Z-axis:555 mmdouble spindle units: spindle distance:800 mmspindle drive:Links (40/100%ED): 18/14 kWspindle turning speed range:31-6300 U/minspindle drive:Rechts (40/100%ED): 18/14 kWspindle turning speed range:31-6300 U/minspeeds of tool:2x12 Werkzeuge: 7/5 KW, 40-4200 U/mindimensions of the machine ca.:5,032 x 3,048 x 2,445 mweight of the machine ca.:6500 KgGildemeister MF Twin 65-II lathe with loading automation.This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.
: 0554 mm: 2000 mm: : 277 mm: 104 mm: 400 mm: 2000 U/min : D1-11 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing diameter:400 mmturning height:950-1500 mmTurning length:210 mmx-travel:310 mmz-travel:350 mmspindle drive:48 kWspindle turning speed range:20-3500 U/minweight of the machine ca.:11 tdimensions of the machine ca.:4,5 x 3,5 x 2,7 m
: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing diameter:400 mmturning height:950-1500 mmTurning length:210 mmx-travel:310 mmz-travel:350 mmspindle drive:48 kWspindle turning speed range:20-3500 U/minweight of the machine ca.:11 tdimensions of the machine ca.:4,5 x 3,5 x 2,7 m
turning diameter:150 mmtotal power requirement:36 kWdimensions of the machine ca.:6,20 x 5,16 x 3,35 m
turning diameter:150 mmtotal power requirement:36 kWdimensions of the machine ca.:6,20 x 5,16 x 3,35 m
faceplate diameter:1800 mmswing diameter:2000 mmturning height:1170 mmz-axis:1000 mmcross rail adjustment - vertical:800 mmfaceplate speeds::2,5 - 280 workpiece weight:12 tfeeds:1 - 6000 mm/minmax. torque on the faceplate:50000 Nmtotal power requirement:85 kWweight of the machine ca.:41 tdimensions of the machine ca.:5,6 x 4,8 x 4,6 mMachine retrofit and overhould in 2005 with SIEMENS 840 D powerline control- 6 jaw hydraulic power chuck- tool changer for 12 tools- chip conveyor, coolant attachment, splash housing- various tool holders
faceplate diameter:1000 mmswing diameter:1600 mmturning height:1200 mmmain drive:75 kWfaceplate speeds from - to:7 - 800 U/minmilling motor:25 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:800 mmram head dimension:240 x 240 mmweight of the machine ca.:40 todimensions of the machine ca.:9 x 7,8 x 6,0 mMachine general overhould in 2004 and equiped with Siemens 840 D control- tool changer rack magazine- C-axis, live tooling, - Transmit function electronical Y-axis- angular milling head - complete splash housing - coolant device, chip conveyor
faceplate diameter:1400 mmswing diameter:2000 mmturning height:1270 mmmain drive:80 kWfaceplate speeds from - to:1 - 355 U/minmax. workpiece weight:6.000 kgmilling motor:37 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:800 (8 x 100 mm) mmram head dimension:240 x 240 mmmax. ram stroke:1250 mmweight of the machine ca.:50 tototal power requirement:133 kVAdimensions of the machine ca.:11 x 5 x 6,4 mMachine general overhould in 2008 and equiped with CNC SIEMENS 840 D control- tool changer for 72 tools- C-axis, live tooling- angular- and straight tool holder head with CAPTO taper - Transmit function- complete splash housing - coolant device, chip conveyor- diverse accessories
turning diameter:300 mmswing diameter:350 mmturning height:275 mmx-axis:925 mmz-axis:250 mmclamping chuck diameter:200 mmFeed speed:30 m/min.total power requirement:45 kWweight of the machine ca.:7 tMachine was used just from time to time in the last years - very good condition!with CNC SIEMENS 840 D12-station turret head with driven toolingsworkpiece in and out conveyor beltcoolantattachment and chip conveyordiverse accessories
560 € 
