sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 201)
Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alucross-cut and mitre saw with maximum cutting height of 200mmstable grey cast iron constructionprecise ball bearing guide of the tool slide on hardened and ground steel shaftsmanual saw feedfast mitre adjustment up to 25° horizontal and 30° verticalreadjustable fixed stops at 90° and 45°lower saw blade protection can be connected to extraction systemmachine mounted on mobile machine base with 1.5 m long roller conveyors left and rightleft side with scale and stop slide
A Strebig vertical panel saw is available. Horizontal/vertical cutting length: 4200mm/2200mm, max. cutting depth: 80mm, saw blade diameter: 300mm, saw blade bore: 30mm, speed: 4750rpm, machine dimensions X/Y/Z: approx. 5200mm/1200mm/2700mm, weight: approx. 800kg. An on-site inspection is possible.
: 15282 90 band length: 4600 - max. 4750 mm: Fabr. Ideal weight: ca. 890 kgdimensions of the machine ca.: 130 x 850 x 2300 mmPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Scie circulaire Scie circulaire Scie circulaire Hauteur de coupe : 280 mm Diamètre de la lame de scie : 750 mm Puissance du moteur : 7 kW Courroie en V : 3 courroies en V Taille de la table 1250 mm x 940 mm Butée coulissante sur la table Longueur de butée 1200 mm x hauteur 125 mm Largeur de coupe à droite de la lame de scie maximum 550 mm Diamètre de connexion d’extraction 120 mm Poids avec palette : 340 kg Dimensions 1600 mm x 1100 mm x H 1350 mm Dimensions de charge 1400 mm x 1100 mm x H 1600 mm
La serre Hüllhorst à double coupe transversale construite en 1985 en bon état, En service jusqu’à 05/2026 Dimension de charge 3900mm, largeur 1000mm, hauteur 800mm Longueur du pieu à partir de l’arrêt 1920 mm Longueur de raccourci 2500 mm avec réglage de la longueur par électromotrice Installation de coupe à onglets Prix par rapport à l’emplacement
Key data: 45 °, 2600 mm, 1350 mm
Scie à table coulissante VEMA Type FBKS Machine n° 1367 Construit en 1994 Pivot de la lame de scie de 45° Longueur du chariot coulissant : 2600 mm Puissance du moteur 7,5 kW Pas de marqueur Largeur de coupe à droite de la lame de scie : 1350 mm Avec extension de table et extension de table Avec un capot d’extraction étroit et large Diamètre de connexion d’extraction 120 mm Vitesses 4000, 5000, 6500 tr/min réglables via courroie Diamètre de la lame de scie maximum 450 mm Hauteur de coupe maximale 155 mm Poids avec palette : 980 kg Dimensions 2850 mm x 3500 mm x H 1400 mm Dimensions de charge 2850 mm x 2000 mm x H 1600 mm
Key data: 500 mm, 180 mm
Scie à coupe transversale sous la table Largeur de coupe d’environ 500 mm Hauteur de coupe d’environ 120 mm Mouvement en coupe transversale depuis le bas, continu de l’avant vers l’arrière Le plafonnement est déclenché par un pedal Moteur d’environ 3 kW Lame de scie diamètre 500 mm, lame de scie à embout HM Connexion d’aspiration sur le corps de la scie à l’arrière inférieur du diamètre. 100 mm sur chaque côté, convoyeur à rouleaux de 3000 mm de long, de 500 mm de longueur, Diamètre du rouleau 80 mm, espacement du centre au centre 205 mm Un convoyeur à rouleaux avec 2 butées coulissantes Dimensions extérieures : L 6800 mm x F 950 mm x H 1300 mm
Three-function combined table circular saw, slotted hole drilling and milling machine by Kirchner, Leipzig. Without milling arbor. Technical data: Motor: 3 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany
Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 1.5 kW Power supply: 220 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 2.2 kW Connection: 16 A / 400 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Motor: 0.55 kW / 220 V Cutting height: approx. 50 mm Cutting depth: approx. 80 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium
Pfeiffer Piccolo pendulum saw with a sturdy roller feed system for cutting boards and beams. The machine is fitted with a pneumatic saw feed mechanism with a safe two-hand operation system. Video available on request. Technical data: Cutting height: max. approx. 120 mm Cutting width: max. approx. 600 mm Roller table: 250+360 cm Feed: Pneumatic Condition: Gebraucht Location: Tauberbischofsheim, Germany
Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: Cutting length: approx. 2,200 mm Mitre angle: 45° 90° Workpiece: max. 50 × 70 mm Further details: See PDF Condition: Gebraucht Location: Tauberbischofsheim, Germany
Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: Cutting length: max. 380 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Cutting height: max. 120 mm Feed length: max. 5,500 mm Cutting width: max. 700 mm Saw blade diameter: max. 700 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: Motors: 2 Length: approx. 320 cm Width: approx. 140 cm Height: approx. 160 cm Table: swivelling Technical details: on request Condition: Gebraucht Location: Tauberbischofsheim, Germany
utilisé
Sturdy Pehaka band saw for cutting timber and other materials. Technical data: Roller diameter: 800 mm Motor: 3 kW Clearance height: max. approx. 350 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Motor: 1.5 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Condition: Gebraucht Location: Tauberbischofsheim, Germany
utilisé
The Ulmia 1622 table saw is designed for precise rip and cross cuts in solid timber and wood-based materials. Its robust construction ensures reliable performance in craft workshops and general workshops. Ideal for joinery as well as general timber and furniture making. Technical data: Table size: 560 x 710 mm Saw blade diameter: max. approx. 300 mm Motor: 1.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany
Elektra-Beckum BA S 600 light-duty band saw for cutting timber and other materials. Technical data: Roller diameter: 600 mm Weight: 160 kg Cutting height: max. approx. 300 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
SCM Type M3 multi-blade and trimming circular saw for efficient rip cutting, trimming and cutting to size of solid timber, boards and planks. This robust machine is suitable for precise batch cutting with multiple saw blades and a continuously adjustable chain feed. Technical data: Chain width: 300 mm Cutting height: ~100 mm Engine: 35 PS Condition: Gebraucht Location: Tauberbischofsheim, Germany
Weinig OptiCut C700 under-table cross-cut saw for the safe and precise cutting of solid timber, particularly hard and heavy timbers with large cross-sections. The machine features a pneumatically guided saw unit, two-hand control and a hold-down device, and is ideally suited for sawmills, timber construction and industrial solid timber processing. Technical data: Saw blade diameter: 550 mm Cutting width: 750 mm Cutting depth: 175 mm Motor: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany
